Try adding a \slurUp before the \acciaccatura.
I hope you know that you can save some typing by using \relative mode
(in this specific case, where you have many chords that are larger than a
quarter, you could stick to absolute octaves, but still save lots of typing
by inputting the music one octave down and adding \transpose c c'
in front of the first "{"). Another way to save typing in your example
is to tell LilyPond about the beaming strategy you want:
#(override-auto-beam-setting '(end * * 3 4) 1 4)
#(override-auto-beam-setting '(end * * 3 4) 2 4)
A final comment: I strongly recommend you to let LilyPond take care
of the time keeping and putting bar lines at the correct places. My
experience
is that LilyPond is much better at finding typing errors than I am myself.
So, just remove all your \bar "|" (and replace them by bar checks | ) and
get rid of all the s64.
/Mats
Stephen Martin wrote:
I am having the following problem - any suggestions would be
appreciated
I cannot make a slur from the E grace note at the start of the
second bar go to the F#, it goes to the A in all the four
examples I tried below. As you can see, I have tried to think
laterally, but without success so far...
melody = {
\time 3/4 \key a \major \clef treble
\stemDown
<a' e''>8[ <b' e''>] <cis'' e''>[ <a' e''>] <a' fis''>[
<a' a''>] \bar "|" \acciaccatura e'' < a' fis''>4 <a' fis''>8[
<a' g''>] <a' fis''>([ <a' e''>)] \bar "|" \break <a' e''>8[
<b' e''>] <cis'' e''>[ <a' e''>] <a' fis''>[ <a' a''>]
\bar "|" \acciaccatura e'' < fis'' a'>4 <a' fis''>8[ <a' g''>]
<a' fis''>([ <a' e''>)] \bar "|" \break
% (s64 to force the phrases onto the same staff)
s64 << {a'8[ b'] cis''[ a'] a'[ a']} {e''8 e'' e'' e''
fis''a''}>> \bar "|" << {\grace e''( fis''4) fis''8 g'' fis''
e''} { a'4 a'8[ a'] a'([ a')]}>> \bar "|" \break s64 << {a'8[
b' ] cis''[ a'] a'[ a']} {e''8 e'' e'' e'' fis''a''}>> \bar
"|" << {\acciaccatura e'' fis''4 fis''8 g'' fis'' e''} { a'4
a'8[ a'] a'([ a')]}>> \bar "|" }
thanks, Steve
_______________________________________________
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
--
=============================================
Mats Bengtsson
Signal Processing
Signals, Sensors and Systems
Royal Institute of Technology
SE-100 44 STOCKHOLM
Sweden
Phone: (+46) 8 790 8463
Fax: (+46) 8 790 7260
Email: [EMAIL PROTECTED]
WWW: http://www.s3.kth.se/~mabe
=============================================
_______________________________________________
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
