Valentin Villenave-3 wrote > On 2/6/19, Reggie < > reegistoop@
> > wrote: >> Hi. I have put together as much as I can to truly do my best. I hope I am >> able to get some help to learn why I am wrong. I have a few questions. >> One, >> how can I input notes in Violin in the empty measures below divisisi? > > Well, you’re using something a bit unusual : you’re actually starting > a new StaffGroup _inside_ the variable that’s normally used for a > single staff (your first violins) alone. > It’s not impossible, but it’s still a bit hasardous. > > So, if you want your "main" Violin1 to keep playing while all of this > is happening, you have to include it as a simultaneous voice, like I > did in the corrected version of your code below. > >> Finally, how can I create a violin 1 part so each part shows the violin 1 >> and then only the "appropriate" divisi for each part only? I don't >> understand this engraver at all. > > OK, this is where it become tricky. Because of your rather unusual > hack, _all_ of the divisi part are stored in _one_ variable (where we > usually prefer to define lots of different variables, and then use > these whenever we want). So we have to start with your huge variable > with all the staves inside, and then select the ones we want or filter > the ones we don’t want. LilyPond has a mechanism for that: the \tag > command, that allows you to mark one music expression and everything > inside. See > http://lilypond.org/doc/v2.19/Documentation/notation/different-editions-from-one-source > > Oh, one other thing: you don’t need to copy all your definitions > (global, scoreAViolinI etc.) in every file! Just put them all in one > file, that you can call, for example, "variables.ly": > > %%%%% file: variables.ly %%%% > global = {…} > scoreAViolinI = {…} > etc. > %%%%%%%%%%%%%%% > > And then in another file you can just type : > > %%%% file: score.ly %%%%% > > \include "variables.ly" > \header { title = "Full Score" } > \score { > \new StaffGroup << > \new Staff \scoreAViolinI > \new Staff … etc … > >> > } > %%%%%%%%%%%%%%%%% > > And then you can have other files such as > > %%%%%% file : solo_part.ly %%%% > > \include "variables.ly" > \header { title = "individual part" } > \score { > \new Staff \scoreAViolinI > } > %%%%%%%%%%%%%% > > Anyway. Here’s my version of your code, I’ve used tags and added some > examples of divisi parts as \bookparts blocks (just to have nicer > titles, and to force them to start on separate pages in the PDF). > > > %%%%%%%%%%%%%%%%%%%%%%%% > > \version "2.19.80" > > \header { > % Remove default LilyPond tagline > tagline = ##f > } > > global = { > \key c \major > \time 4/4 > } > > scoreAViolinI = \relative c'' { > \global > % Music follows here. > \repeat unfold 10 { c1 } ges1 \break > << > \tag #'divMain { > \oneVoice > \repeat unfold 10 {c,2 d} > } > \\ > \new StaffGroup = "Group" > \with { > shortInstrumentName = \markup \center-column {Vl. "(div. a 4)"} > systemStartDelimiter = #'SystemStartSquare > } << > \tag #'div1 \new Staff = "diva1" \with { > \remove Time_signature_engraver > alignAboveContext = "ViolinMain" > %shortInstrumentName = "v1.1" > } { g1:32 g1:32 g1:32 g1:32 g1:32 g1:32 g1:32 g1:32 g1:32 g1:32 } > \tag #'div2 \new Staff = "diva2" \with { > \remove Time_signature_engraver > alignAboveContext = "ViolinMain" > % shortInstrumentName = "v1.2" > } { bes1:32 bes1:32 bes1:32 bes1:32 bes1:32 bes1:32 bes1:32 bes1:32 > bes1:32 bes1:32 } > \tag #'div3 \new Staff = "diva3" \with { > \remove Time_signature_engraver > alignAboveContext = "ViolinMain" > % shortInstrumentName = "v1.3" > } { f1:32 f1:32 f1:32 f1:32 f1:32 f1:32 f1:32 f1:32 f1:32 f1:32 } > \tag #'div4 \new Staff = "diva4" \with { > \remove Time_signature_engraver > alignAboveContext = "ViolinMain" > \override BarLine.allow-span-bar = ##f > % shortInstrumentName = "v1.4" > } { as1:32 as1:32 as1:32 as1:32 as1:32 as1:32 as1:32 as1:32 as1:32 > as1:32 } > >> > >> > \repeat unfold 20 { fes1 } > } > > scoreAViolinII = \relative c'' { > \global > % Music follows here. > \repeat unfold 50 { d1 } > } > > scoreAViola = \relative c' { > \global > % Music follows here. > \repeat unfold 50 { e1 } > } > > scoreACello = \relative c { > \global > % Music follows here. > \repeat unfold 50 { f1 } > } > > scoreAContrabass = \relative c { > \global > % Music follows here. > \repeat unfold 50 { g1 } > } > > scoreAViolinIPart = \new Staff = "ViolinMain" \with { > instrumentName = "Violin I" > shortInstrumentName = "Vl. I" > } \scoreAViolinI > > scoreAViolinIIPart = \new Staff \with { > instrumentName = "Violin II" > shortInstrumentName = "Vl. II" > } \scoreAViolinII > > scoreAViolaPart = \new Staff \with { > instrumentName = "Viola" > shortInstrumentName = "Vla." > } { \clef alto \scoreAViola } > > scoreACelloPart = \new Staff \with { > instrumentName = "Cello" > shortInstrumentName = "Cl." > } { \clef bass \scoreACello } > > scoreAContrabassPart = \new Staff \with { > instrumentName = "Contrabass" > shortInstrumentName = "Cb." > } { \clef bass \scoreAContrabass } > > \score { > << > \new StaffGroup << > \scoreAViolinIPart > \scoreAViolinIIPart > \scoreAViolaPart > \scoreACelloPart > \scoreAContrabassPart > >> > >> > \layout { } > } > > \paper { > #(set-paper-size "a4") > top-margin = 15\mm > left-margin = 25\mm > right-margin = 25\mm > bottom-margin = 15\mm > } > > > > scoreAViolinIPart = \new Staff = "ViolinMain" \with { > instrumentName = "Violin I" > shortInstrumentName = "Vl. I" > } \scoreAViolinI > > > \bookpart { > \header { > title = "Violin Part (main)" > } > \removeWithTag #'(div1 div2 div3 div4) > \scoreAViolinIPart > } > > \bookpart { > \header { > title = "Violin Part (div. 1)" > } > \removeWithTag #'(divMain div2 div3 div4) > \scoreAViolinIPart > } > > \bookpart { > \header { > title = "Violin Part (div. 2)" > } > \removeWithTag #'(divMain div1 div3 div4) > \scoreAViolinIPart > } > > > \paper { > #(set-paper-size "a4") > top-margin = 15\mm > left-margin = 25\mm > right-margin = 25\mm > bottom-margin = 15\mm > } > > \layout { > \context { > \Staff > \RemoveEmptyStaves > } > } > > %%%%%%%%%%%%%%%%%%%%%%%% > > HTH! > > Cheers, > V. > > _______________________________________________ > lilypond-user mailing list > lilypond-user@ > https://lists.gnu.org/mailman/listinfo/lilypond-user V, I don't know what to say but thank you from the bottom of my heart. You saved me and my code. I have a lot to learn from this. I thank you. I would like to ask few questions more. First, you say I included all violin 1 in one variable. Why is this bad? I thought each part needs to usually get = one variable. That seems normal ok? How can you create a variable for a 10 measure divisi, do you really mean that? In that piece, then I would have variables: violinone, violinonediv1, violinonediv2, violinonediv3, for the entire instrumentation? Wow that is a lot of variables :)) Or do you mean violinone, violinonedivisis and that's it? Second please, why do you need to \remove Time_signature_engraver when you create my divisi part? I don't see why that is needed for me. Thanks!!!! -- Sent from: http://lilypond.1069038.n5.nabble.com/User-f3.html _______________________________________________ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
