6. Januar 2018 12:27, "Blöchl Bernhard" <bb-543...@telecolumbus.net> schrieb:
> Thanks for your kind support! > > To avoid a false delusion, in advance for list members jumping into this > thread the good message > for all linux users that the repository version of frescobaldi is always > running clueless. This > installation discussions are mor or less gymnastic exercises around computer > imperfection and not a > prerequisite to run a frescobaldi on a linux computer. > > I installed, or tried to install frescobaldi 2.20.0 and frescobaldi 3.0.0 a > couple of times on > different linux brands but all based on different ubuntu versions from 16.04 > (LTS) up to 17, 17.04 > and 17.10. I did not try ubuntu 16.10. With frescobaldi 2.20.0 I always had > success, with > frescobaldi 3.0.0 it always flopped prior to ubuntu 17.x. > > A "clean" installation has python3-ly 0.9.3-1 in the repository. Both > frescobaldi versions need > indispensable python-ly version 0.9.5. I do not find the installation step > for python-ly version > 0.9.5 (https://pypi.python.org/pypi/python-ly) in your description? Obviously > you use a previously > installed python-ly version 0.9.5, may be a path to another linux version? As said I am currently updating the Wiki page, but the instructions are there (alhtough somewhat scrambled ATM) how to run python-ly from its own Git repository (which can also be downloaded). I have the impression that installing packages through pip does not work properly, so my recommendation (which I am currently formulating in the Wiki page to be fully clear) for Ubuntu 16.04 (didn't check 16.10 and 17.04) is to install everything except python-ly and frescobaldi through apt and download/clone these two from Github. Linux Mint 18.3 is the same. Urs > The other steps I have > done quite often previously. I will install Linux Mint 18.3 today evening to > a blank disk and give > frescobaldi 3.0.0 another (last) sportive try to satisfy an ambition. But at > least I will wait for > ubuntu Bionic Beaver 18.04 (anounced for late April 2018) to set up a system > for the LTS time span. > > Kind regards BB > > Am 06.01.2018 11:06, schrieb li...@openlilylib.org: > >> Hi, >> I have now installed Linux Mint 18.3 (based on Ubuntu 16.04) on a >> computer and installed Frescobaldi 3 through apt without *any* issues. >> First I did >> sudo apt install python3-pyqt5 python3-pyqt5.qtsvg >> python3-pyqt5.qtwebkit git >> Then I cloned the repositories of python-ly and frescobaldi. >> When I launched Frescobaldi using >> PYTHONPATH=$PYTHONPATH:/path/to/python-ly >> Frescobaldi starts, but doesn't open the Music View (because Poppler >> is missing, of course) >> Then I tried >> sudo apt install python3-poppler-qt5 >> upon which Frescobaldi started correctly with both SVG and PDF viewers >> working. >> This tells me that the Ubuntu packages are now working properly even >> for Ubuntu 16.04. >> There's one caveat that *might* be happening in addition: I am using a >> previously existing $HOME directory, so there *might* be something I >> had already configured earlier. But actually I'm quite sure this is >> not the case, as before installing python3-poppler-qt5 it was not >> detected at all, while after installation it worked properly. >> I will write a post to the list with some more reasoning, just to have >> it recorded publicly. >> Best >> Urs >> 5. Januar 2018 18:27, "bb" <bb-543...@telecolumbus.net> schrieb: >> Sorry, I forgot to send regards. >>>>> PS: I will wait for the new ubuntu LTS version anounced for April. >>>>> -------- Weitergeleitete Nachricht -------- >>>>> BETREFF: >>> Re: frescobaldi 3 >>>>> DATUM: >>> Fri, 5 Jan 2018 18:21:54 +0100 >>>>> VON: >>> bb <bb-543...@telecolumbus.net> >>>>> AN: >>> li...@openlilylib.org >>>>> Am 05.01.2018 um 16:23 schrieb li...@openlilylib.org: >>>>> One more short "shot" 5. Januar 2018 15:08, "bb" >>> <bb-543...@telecolumbus.net> schrieb: >>>>> As the last line of the installation process of frescobaldi-3.0.0 >>> is:RuntimeError: popplerqt5 cannot import type '????' from >>> PyQt5.QtCore ~/frescobaldi-3.0.0 $ >>>>> Does that mean you run the `setup.py` file from Frescobaldi? I have >>> never done so, and in "my" instructions this is not mentioned. >> >> I first tried with " python3 frescobaldi". But "python3 frescobaldi" >> does display the icon only for short time and disappears, as described >> in the past mails. Then I read the INSTALL document of >> fresobaldi-3.0.0 and experimented further. I will repeat to >> load/install the libs and try again without using "sudo python3 >> setup.py install" from frescobaldi-3.0.0. >> In a first step I installed PyQt5 from >> https://pypi.python.org/pypi/PyQt5 [2] with >> "pip3 install PyQt5" >> My suspicion is that after having manually installed >>> python-poppler-qt5 from the Git repository using "setup.py" from >>> Frescobaldi will essentially trash that effort by installing the >>> package from the repositories. >>>>>> I tried to install python-poppler-qt5 (again). >>>>> Actually this is what I would have suggested, *re*install the >>> poppler package from the repository and then *not* run Frescobaldi's >>> installer again. >> >> I reinstall with >> Workaround: Building python-poppler-qt5 From Source >> cd ~/git git clone https://github.com/wbsoft/python-poppler-qt5 [1] cd >> python-poppler-qt5 python3 setup.py build sudo python3 setup.py >> install >> and check with idle3: >> import popplerqt5 >> Traceback (most recent call last): >> File "<pyshell#0>", line 1, in <module> >> import popplerqt5 >> ImportError: /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version >> `Qt_5.9' not found (required by >> /home/bb/.local/lib/python3.5/site-packages/PyQt5/QtCore.so) >> import PyQt5 >> from PyQt5.QtCore import * >> Traceback (most recent call last): >> File "<pyshell#6>", line 1, in <module> >> from PyQt5.QtCore import * >> ImportError: /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version >> `Qt_5.9' not found (required by >> /home/bb/.local/lib/python3.5/site-packages/PyQt5/QtCore.so) >> import QtCore.so >> Traceback (most recent call last): >> File "<pyshell#12>", line 1, in <module> >> import QtCore.so >> ImportError: No module named 'QtCore' >>>> Something wrong ? >> I argued that this has something to do with PyQt5 etc? so I tried >> ~/python-poppler-qt5 $ python setup.py build ... omitted lines ... >> File "setup.py", line 216, in __find_pyqt_sip_flags from PyQt5 >> import QtCore ImportError: No module named PyQt5 >> ~/python-poppler-qt5 $ >>>>> Well, this seems clear: you probably don't have a PyQt5 package >>> installed for Python *2*. You should do `sudo python3 setup.py >>> build` (using Python 3). >> >> As mentioned above: >> In a first step I installed PyQt5 from >> https://pypi.python.org/pypi/PyQt5 [2] with >> "pip3 install PyQt5" >> I tried it with a version ~/python-poppler-qt5-0.24.2 and got the >> message ... omitted lines ... File "setup.py", line 156, in >> finalize_options self.pyqt_sip_flags = >> self.__find_pyqt_sip_flags() File "setup.py", line 216, in >> __find_pyqt_sip_flags from PyQt5 import QtCore ImportError: No >> module named PyQt5 ~/python-poppler-qt5-0.24.2 $ Beforehand that >> python-poppler install trials I installed pyqt5-dev, >> pyqt5-dev-tools, python3-pyqt5, python3-pyqt5-qtsvg, >> python3-pyqt5-qtwebkit from repository for any eventuality as >> well. Actually just now as an experiment I installed python-pyqt5 >> version 5.5.1+dfg-3ubuntu4 (from repository) and tried the above >> again and get lots of deprication warnings. Deinstalled and get >> the above now again. Points in the direction of Version problems? >>>>> Yes. python-pyqt5 is the PyQt5 version for Python 2, so when you run >>> setup.py with Python 2 you won't get the error about "no module >>> PyQt5" anymore, but the rest of the code isn't compatible anymore. >> >> As mentioned above: >> In a first step I installed PyQt5 from >> https://pypi.python.org/pypi/PyQt5 [2] with >> "pip3 install PyQt5" >> I cannot find the source? I always find "pip3 install PyQt5" - that is >> what I have done >> https://pypi.python.org/pypi/PyQt5 [2] >> http://pyqt.sourceforge.net/Docs/PyQt5/installation.html [3] >> Should I send this clarification to Github as well? >>>>> I don't think so for now. Let me look closer into this (I will >>> install Mint 18 on the PC when I'm allowed to shut down Windows ;-) >>> ). But maybe reinstalling python-poppler-qt5 from the Git repository >>> with Python 3 brings you forward anyway? (Just don't run the >>> Frescobaldi installer afterwards. Actually this is not necessary at >>> all when you have the dependencies already installed manually. Good >>> luck Urs >>>>>> Kind regards BB PS: I know Python cursorily and did not become a >> >> fan, so I am not good enough to be of help. >>>>> I think it's less of an actual *Python* problem but more generally >>> related to package management. >> >> In a last check of >> python3 frescobaldi >> the behavour is unchanged. >> The result is negative and confirmes my past result that I never got >> version 3 to work on a ubunto prior to 17. As I mentioned I have >> working frescobaldi3 on a linux version based on ubuntu 17. >> May be the problem is inherent in something with the GUI based Linux >> Mint? One might check other linux versions and as you reported you >> have installed on Linux. Which brand? >>>> Links: >> ------ >> [1] https://github.com/wbsoft/python-poppler-qt5 >> [2] https://pypi.python.org/pypi/PyQt5 >> [3] http://pyqt.sourceforge.net/Docs/PyQt5/installation.html _______________________________________________ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
