Federico,Thank you for the info.I have been using USB to install lilypond. But
I have not try to use it an another computer. I will try to use it on another
computer to check it out.I have lilypond v2.19.49, to v2.19.56 on my USB drive
and there is no problem to do the frecobaldi lilypond preference. I installed
v2.19.57 on the same USB, it said install complete. I assume every thing is OK.
When try to do frecobaldi lilypond preference, it failed. Later I check the
directory of the USB, v2.19.57 is there, but there is no content it it. That
is why doing frecobaldi lilypond preference failed. I seems that the USB is
full. I plan to unstall older version, say v2.19.49, v2.19.50, v2.19.51 and
install v2.19.57 again onto the USB to check if the frecobalri lilypond
preference fails or not. Ming.
From: Federico Bruni <f...@inventati.org>
To: MING TSANG <tsan...@rogers.com>
Cc: "frescoba...@googlegroups.com" <frescoba...@googlegroups.com>;
Lilypond-usermailinglist <lilypond-user@gnu.org>
Sent: Sunday, March 26, 2017 11:53 AM
Subject: Re: [Frescobaldi] cannot add lilypond 2.19.57 to lilypond preference
I had the same problem years ago. I wanted to have LilyPond and
Frescobaldi installed on a USB stick because I needed to use in a
computer where I could not install any software.
I think I asked for help on lilypond-user, bat cannot find it in the
archive.
I vaguely remember that the error was due to lilypond "relocation".
Il giorno gio 23 mar 2017 alle 20:14, MING TSANG <tsan...@rogers.com>
ha scritto:
> Knute, Simon and Anders.
>
> Thank you for all your response.
> It looks that I install v2.19.57 to a USB drive give me problem.
> After the install, directory entry is there and I assume everything
> is there. When I add lilypond preference to frecobaldi v3.0.0 and it
> fails.
> Knute, after your email I check the directory content of directory on
> USD drive, but find none. So I re-install lilypond v2.19.57 to drive
> C, and the "add" lilypond preference works.
>
> Thank you,
> Ming.
>
>
> From: Knute Snortum <ksnor...@gmail.com>
> To: frescoba...@googlegroups.com
> Sent: Thursday, March 23, 2017 11:10 AM
> Subject: Re: [Frescobaldi] cannot add lilypond 2.19.57 to lilypond
> preference
>
> I have the same setup and it works fine.
>
> What happens if you open a command prompt window and type this:
>
> > E:
> > cd \Lilypond_2-19-57\lilypond\usr\bin
> > lilypond --version
>
> If that give you a version message, I'd try changing the preference
> to "lilypond.exe" instead of "lilypond-windows.exe". I'm not sure
> that sure matter, but we'll see.
>
> ---
> Knute Snortum
> (via Gmail)
>
> On Wed, Mar 22, 2017 at 5:24 PM, <tsan...@rogers.com> wrote:
>> I download lilypond v2.19.57 and installed it in window 10. I have
>> multi version of lilypond. Each has it own file folder. I try to
>> add the version v2.19.57 to lilypond preference and it failed. refer
>> to .png attached. Any change to frecobaldi 3.0.0 that caused this.
>>
>> Thank you,
>> Ming
>> --
>> Frescobaldi homepage: http://www.frescobaldi.org/
>> Mailing list: http://groups.google.com/ group/frescobaldi
>> Issue tracker: https://github.com/wbsoft/ frescobaldi/issues
>
> --
> Frescobaldi homepage: http://www.frescobaldi.org/
> Mailing list: http://groups.google.com/group/frescobaldi
> Issue tracker: https://github.com/wbsoft/frescobaldi/issues
>
>
--
Frescobaldi homepage: http://www.frescobaldi.org/
Mailing list: http://groups.google.com/group/frescobaldi
Issue tracker: https://github.com/wbsoft/frescobaldi/issues
_______________________________________________
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
