On 15 Feb 2022, at 20:04, Peter Crowther <peter.crowt...@melandra.com <mailto:peter.crowt...@melandra.com>> wrote: > > And eno1 and eno2 are *both* connected to the same external switch, yes?
Correct, where each NIC has its ip access-list. XX1.XX1.XX1.150 and XX2.XX2.XX2.100 are on separate NICs. When I ping the VM, XX2.XX2.XX2.100, from the host, XX1.XX1.XX1.150, the host pings itself. Thanks! Wolf > > On Tue, 15 Feb 2022 at 17:17, Wolf <ort_libv...@bergersen.no > <mailto:ort_libv...@bergersen.no>> wrote: > Hi! > > 1) I have two network ports on my server. > - eno1 has the IP: XX1.XX1.XX1.150 > > - bridge0 has the IP: XX2.XX2.XX2.100 > and has the interface member: port eno2. > eno2 is not set up with an IP address. > > 2) The host runs on IP: XX1.XX1.XX1.150 > > 3) A VM uses the bridge: bridge0, and has the IP: XX2.XX2.XX2.100 > > I have a problem with this setup: > I can ssh the VM on XX2.XX2.XX2.100 from outside, but from the host, > XX1.XX1.XX1.150, I can't ssh the VM on XX2.XX2.XX2.100. > > Have I set up this wrong or is it something I can do to solve this? > > Thanks! > > Wolf > >
