* Ralf Wildenhues wrote on Thu, Jan 10, 2008 at 08:29:33AM CET:
>
> For whatever output is left done by libtool I expect that whoever want's
> it silenced hard enough will have enough motivation to send a patch to
> <[EMAIL PROTECTED]>.
Since repeatedly nobody stepped forward to do this, I wrote that patch
myself now. OK to apply to HEAD?
Cheers,
Ralf
2008-01-14 Ralf Wildenhues <[EMAIL PROTECTED]>
Silence all non-warning output from `libtool --silent'.
* libltdl/config/ltmain.m4sh (func_generate_dlsyms)
(func_extract_archives, func_mode_link): Use func_verbose
instead of func_echo for all non-warning output.
Index: libltdl/config/ltmain.m4sh
===================================================================
RCS file: /cvsroot/libtool/libtool/libltdl/config/ltmain.m4sh,v
retrieving revision 1.95
diff -u -r1.95 ltmain.m4sh
--- libltdl/config/ltmain.m4sh 12 Jan 2008 13:58:14 -0000 1.95
+++ libltdl/config/ltmain.m4sh 14 Jan 2008 21:19:24 -0000
@@ -879,7 +879,7 @@
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
# Parse the name list into a source file.
- func_echo "creating $output_objdir/$my_dlsyms"
+ func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation.
*/
@@ -893,14 +893,14 @@
"
if test "$dlself" = yes; then
- func_echo "generating symbol list for \`$output'"
+ func_verbose "generating symbol list for \`$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" |
$NL2SP`
for progfile in $progfiles; do
- func_echo "extracting global C symbols from \`$progfile'"
+ func_verbose "extracting global C symbols from \`$progfile'"
$opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >>
'$nlist'"
done
@@ -947,7 +947,7 @@
fi
for dlprefile in $dlprefiles; do
- func_echo "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from \`$dlprefile'"
func_basename "$dlprefile"
name="$func_basename_result"
$opt_dry_run || {
@@ -1159,7 +1159,7 @@
case $host in
*-darwin*)
- func_echo "Extracting $my_xabs"
+ func_verbose "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
$opt_dry_run || {
darwin_orig_dir=`pwd`
@@ -1171,7 +1171,7 @@
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
- func_echo "$darwin_base_archive has multiple architectures
$darwin_arches"
+ func_verbose "$darwin_base_archive has multiple architectures
$darwin_arches"
for darwin_arch in $darwin_arches ; do
func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
lipo -thin $darwin_arch -output
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
"${darwin_archive}"
@@ -4655,13 +4655,13 @@
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_echo "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from \`$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_echo "generating import library for \`$soname'"
+ func_verbose "generating import library for \`$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
@@ -5982,7 +5982,7 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n
"$export_symbols_regex"; then
- func_echo "generating symbol list for \`$libname.la'"
+ func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
@@ -5996,7 +5996,7 @@
skipped_export=false
else
# The command line is too long to execute in one step.
- func_echo "using reloadable object file for export list..."
+ func_verbose "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
@@ -6019,7 +6019,7 @@
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols";
then
# The given exports_symbols file has to be filtered, so filter it.
- func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA
exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
# 's' commands which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
@@ -6126,7 +6126,7 @@
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test
"$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
- func_echo "creating GNU ld script: $output"
+ func_verbose "creating GNU ld script: $output"
$ECHO 'INPUT (' > $output
for obj in $save_libobjs
do
@@ -6136,7 +6136,7 @@
delfiles="$delfiles $output"
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" &&
test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
- func_echo "creating linker input file list: $output"
+ func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
@@ -6153,7 +6153,7 @@
output=$firstobj\"$file_list_spec$output\"
else
if test -n "$save_libobjs"; then
- func_echo "creating reloadable object files..."
+ func_verbose "creating reloadable object files..."
output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
@@ -6196,7 +6196,7 @@
fi
if ${skipped_export-false}; then
- func_echo "generating symbol list for \`$libname.la'"
+ func_verbose "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$opt_dry_run || $RM $export_symbols
libobjs=$output
@@ -6209,7 +6209,7 @@
fi
test -n "$save_libobjs" &&
- func_echo "creating a temporary reloadable object file: $output"
+ func_verbose "creating a temporary reloadable object file:
$output"
# Loop through the commands generated above and execute them.
save_ifs="$IFS"; IFS='~'
@@ -6249,7 +6249,7 @@
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_echo "filter symbol list for \`$libname.la' to tag DATA
exports"
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA
exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots
of
# 's' commands which not all seds can handle. GNU sed should be
fine
# though. Also, the filter scales superlinearly with the number of
@@ -6746,7 +6746,7 @@
func_show_eval "$link_command" 'exit $?'
# Now create the wrapper script.
- func_echo "creating $output"
+ func_verbose "creating $output"
# Quote the relink command for shipping.
if test -n "$relink_command"; then
@@ -6928,7 +6928,7 @@
cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
- func_echo "using piecewise archive linking..."
+ func_verbose "using piecewise archive linking..."
save_RANLIB=$RANLIB
RANLIB=:
objlist=
@@ -6978,7 +6978,7 @@
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
- func_echo "creating $output"
+ func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
_______________________________________________
http://lists.gnu.org/mailman/listinfo/libtool
