sw/qa/extras/ooxmlexport/ooxmlexport13.cxx | 4 -
sw/source/core/doc/doclay.cxx | 11 +++-
sw/source/core/doc/textboxhelper.cxx | 3 -
sw/source/core/unocore/unotext.cxx | 21 +++++++--
writerfilter/source/dmapper/DomainMapper_Impl.cxx | 49 +++++++++++-----------
writerfilter/source/dmapper/GraphicImport.cxx | 11 ++--
6 files changed, 58 insertions(+), 41 deletions(-)
New commits:
commit 4562036996e98ef33f42889abe78cfb975341776
Author: Vasily Melenchuk <vasily.melenc...@cib.de>
AuthorDate: Mon Dec 27 13:54:23 2021 +0300
Commit: Thorsten Behrens <thorsten.behr...@allotropia.de>
CommitDate: Wed Aug 3 21:54:36 2022 +0200
tdf#143703 sw: always assign name for fly section
Previously generated name was assigned only if not in doc
reading mode. But there is no guarantee that it will be assigned
later. Better to insert any name in SwDoc::MakeFlySection_() and
later it can be overwritten, but fly will definitely have
any unique name.
* Some test failed because GraphicImport_Impl::applyName() overwrote the
name with a different generated one.
* This breaks chaining of VML shapes, see test testTDF87348.
The code introduced in commit 091fe76b6329b4bb974987554369cbfadd8f2401
in DomainMapper_Impl::ChainTextFrames() breaks if the text frame
already has a name; it's a bit confusing which names there come from
the file and which come from the API, and it also mixes 2 different
cases of VML chaining and DrawingML chaining that look like they
should be using different data.
* This also breaks moving flys anchored at-char in flys into them in
SwXText::convertToTextFrame(), see ooxmlexport13 testFlyInFly.
This kind of worked by accident before: the fly is copied and then the
original deleted, keeping the same name (with help of
SwDoc::mbCopyIsMove); with no name it would compare the SdrObject
pointer, which is different for the new copy, now the name is the
same.
Fix this by only moving flys anchored at the edge of the selection
back inoto the body; it turns out that Word actually supports at-char
anchors in text frames, but only if it's a VML shape or Compatibility
Mode or whatever; i wasn't able to do it in a document created from
scratch.
This is a bit tricky to ignore the nodes added for floating tables as
seen in ooxmlexport10 testFloatingTablesAnchor.
* Another change is required in SwDoc::SetFlyName() because of
testTdf127732, as it would rename a frame named "Frame1" to "Frame2"
when called to rename it to "Frame1".
* Some tests failed because after MakeFlySection_() assigns a name it is
immediately unconditionally overwritten; replace that with asserts
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/127556
Tested-by: Jenkins
Reviewed-by: Michael Stahl <michael.st...@allotropia.de>
(cherry picked from commit 4d6243693c228703394c00164276f8326447beb9)
Change-Id: I46752a4413ba3a9e981eccd1e153b3aaf8053781
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/137766
Tested-by: Thorsten Behrens <thorsten.behr...@allotropia.de>
Reviewed-by: Thorsten Behrens <thorsten.behr...@allotropia.de>
diff --git a/sw/qa/extras/ooxmlexport/ooxmlexport13.cxx
b/sw/qa/extras/ooxmlexport/ooxmlexport13.cxx
index 5ad0a4ece74c..6305de3577a2 100644
--- a/sw/qa/extras/ooxmlexport/ooxmlexport13.cxx
+++ b/sw/qa/extras/ooxmlexport/ooxmlexport13.cxx
@@ -44,11 +44,11 @@ DECLARE_SW_EXPORT_TEST(testFlyInFly, "ooo39250-1-min.rtf",
nullptr, Test)
// check that anchor of text frame is in other text frame
uno::Reference<text::XTextContent> const xAnchored(getShape(3),
uno::UNO_QUERY);
CPPUNIT_ASSERT(xAnchored.is());
- CPPUNIT_ASSERT_EQUAL(OUString(""),
uno::Reference<container::XNamed>(xAnchored, uno::UNO_QUERY_THROW)->getName());
+ CPPUNIT_ASSERT_EQUAL(OUString("Frame1")/*generated name*/,
uno::Reference<container::XNamed>(xAnchored, uno::UNO_QUERY_THROW)->getName());
uno::Reference<text::XText> const
xAnchorText(xAnchored->getAnchor()->getText());
uno::Reference<text::XTextFrame> const xAnchorFrame(xAnchorText,
uno::UNO_QUERY);
CPPUNIT_ASSERT(xAnchorFrame.is());
- CPPUNIT_ASSERT_EQUAL(OUString("Frame2"),
uno::Reference<container::XNamed>(xAnchorFrame,
uno::UNO_QUERY_THROW)->getName());
+ CPPUNIT_ASSERT_EQUAL(OUString("Frame3"),
uno::Reference<container::XNamed>(xAnchorFrame,
uno::UNO_QUERY_THROW)->getName());
}
DECLARE_OOXMLEXPORT_TEST(testTdf125778_lostPageBreakTOX,
"tdf125778_lostPageBreakTOX.docx")
diff --git a/sw/source/core/doc/doclay.cxx b/sw/source/core/doc/doclay.cxx
index ec4861fe39b2..5b3dc0ef3687 100644
--- a/sw/source/core/doc/doclay.cxx
+++ b/sw/source/core/doc/doclay.cxx
@@ -157,13 +157,12 @@ SwFlyFrameFormat* SwDoc::MakeFlySection_( const
SwPosition& rAnchPos,
pFrameFormat = getIDocumentStylePoolAccess().GetFrameFormatFromPool(
RES_POOLFRM_FRAME );
OUString sName;
- if( !mbInReading )
- switch( rNode.GetNodeType() )
- {
+ switch( rNode.GetNodeType() )
+ {
case SwNodeType::Grf: sName = GetUniqueGrfName(); break;
case SwNodeType::Ole: sName = GetUniqueOLEName(); break;
default: sName = GetUniqueFrameName(); break;
- }
+ }
SwFlyFrameFormat* pFormat = MakeFlyFrameFormat( sName, pFrameFormat );
// Create content and connect to the format.
@@ -1408,6 +1407,10 @@ const SwFlyFrameFormat* SwDoc::FindFlyByName( const
OUString& rName, SwNodeType
void SwDoc::SetFlyName( SwFlyFrameFormat& rFormat, const OUString& rName )
{
+ if (rFormat.GetName() == rName)
+ {
+ return;
+ }
OUString sName( rName );
if( sName.isEmpty() || FindFlyByName( sName ) )
{
diff --git a/sw/source/core/doc/textboxhelper.cxx
b/sw/source/core/doc/textboxhelper.cxx
index ea57aa58319d..40d1bb607c1e 100644
--- a/sw/source/core/doc/textboxhelper.cxx
+++ b/sw/source/core/doc/textboxhelper.cxx
@@ -90,7 +90,8 @@ void SwTextBoxHelper::create(SwFrameFormat* pShape)
xPropertySet->setPropertyValue(UNO_NAME_SURROUND,
uno::makeAny(text::WrapTextMode_THROUGH));
uno::Reference<container::XNamed> xNamed(xTextFrame, uno::UNO_QUERY);
- xNamed->setName(pShape->GetDoc()->GetUniqueFrameName());
+ assert(!xNamed->getName().isEmpty());
+ (void)xNamed;
// Link its text range to the original shape.
uno::Reference<text::XTextRange> xTextBox(xTextFrame,
uno::UNO_QUERY_THROW);
diff --git a/sw/source/core/unocore/unotext.cxx
b/sw/source/core/unocore/unotext.cxx
index 3887a11191d7..a4dfe5422af1 100644
--- a/sw/source/core/unocore/unotext.cxx
+++ b/sw/source/core/unocore/unotext.cxx
@@ -1566,6 +1566,8 @@ SwXText::convertToTextFrame(
}
bool bParaAfterInserted = false;
bool bParaBeforeInserted = false;
+ ::std::optional<SwPaM> oAnchorCheckPam;
+ oAnchorCheckPam.emplace(*pStartPam->Start(), *pEndPam->End());
if (
pStartStartNode && pEndStartNode &&
(pStartStartNode != pEndStartNode || pStartStartNode != GetStartNode())
@@ -1646,6 +1648,7 @@ SwXText::convertToTextFrame(
bParaAfterInserted =
GetDoc()->getIDocumentContentOperations().AppendTextNode( aEnd );
pEndPam->DeleteMark();
*pEndPam->GetPoint() = aEnd;
+ *oAnchorCheckPam->End() = aEnd;
}
pStartPam->SetMark();
*pStartPam->End() = *pEndPam->End();
@@ -1660,10 +1663,17 @@ SwXText::convertToTextFrame(
{
const SwFrameFormat* pFrameFormat =
(*m_pImpl->m_pDoc->GetSpzFrameFormats())[i];
const SwFormatAnchor& rAnchor = pFrameFormat->GetAnchor();
- if ( !isGraphicNode(pFrameFormat) &&
- (RndStdIds::FLY_AT_PARA == rAnchor.GetAnchorId() ||
RndStdIds::FLY_AT_CHAR == rAnchor.GetAnchorId()) &&
- pStartPam->Start()->nNode.GetIndex() <=
rAnchor.GetContentAnchor()->nNode.GetIndex() &&
- pStartPam->End()->nNode.GetIndex() >=
rAnchor.GetContentAnchor()->nNode.GetIndex())
+ // note: Word can do at-char anchors in text frames - sometimes!
+ // see testFlyInFly for why this checks only the edges of the
selection,
+ // and testFloatingTablesAnchor for why it excludes pre/post table
+ // added nodes
+ if (!isGraphicNode(pFrameFormat)
+ && ( (RndStdIds::FLY_AT_PARA == rAnchor.GetAnchorId()
+ && ( oAnchorCheckPam->Start()->nNode.GetIndex() ==
rAnchor.GetContentAnchor()->nNode.GetIndex()
+ || oAnchorCheckPam->End()->nNode.GetIndex() ==
rAnchor.GetContentAnchor()->nNode.GetIndex()))
+ || (RndStdIds::FLY_AT_CHAR == rAnchor.GetAnchorId()
+ && ( *oAnchorCheckPam->Start() ==
*rAnchor.GetContentAnchor()
+ || *oAnchorCheckPam->End() ==
*rAnchor.GetContentAnchor()))))
{
if (pFrameFormat->GetName().isEmpty())
{
@@ -1675,6 +1685,7 @@ SwXText::convertToTextFrame(
}
}
}
+ oAnchorCheckPam.reset(); // clear SwIndex before deleting nodes
const uno::Reference<text::XTextFrame> xNewFrame(
SwXTextFrame::CreateXTextFrame(*m_pImpl->m_pDoc, nullptr));
@@ -1692,7 +1703,7 @@ SwXText::convertToTextFrame(
new SwXTextRange(*pStartPam, this);
assert(rNewFrame.IsDescriptor());
rNewFrame.attachToRange(xInsertTextRange, pStartPam.get());
- rNewFrame.setName(m_pImpl->m_pDoc->GetUniqueFrameName());
+ assert(!rNewFrame.getName().isEmpty());
}
SwTextNode *const pTextNode(pStartPam->GetNode().GetTextNode());
diff --git a/writerfilter/source/dmapper/DomainMapper_Impl.cxx
b/writerfilter/source/dmapper/DomainMapper_Impl.cxx
index 6c23a74f45be..a239276bc547 100644
--- a/writerfilter/source/dmapper/DomainMapper_Impl.cxx
+++ b/writerfilter/source/dmapper/DomainMapper_Impl.cxx
@@ -3458,14 +3458,15 @@ void DomainMapper_Impl::ChainTextFrames()
sal_Int32 nId;
sal_Int32 nSeq;
OUString s_mso_next_textbox;
- bool bShapeNameSet;
- TextFramesForChaining(): nId(0), nSeq(0), bShapeNameSet(false) {}
+ OUString shapeName;
+ TextFramesForChaining() : nId(0), nSeq(0) {}
} ;
typedef std::map <OUString, TextFramesForChaining> ChainMap;
try
{
ChainMap aTextFramesForChainingHelper;
+ ::std::vector<TextFramesForChaining> chainingWPS;
OUString sChainNextName("ChainNextName");
//learn about ALL of the textboxes and their chaining values first -
because frames are processed in no specific order.
@@ -3503,19 +3504,22 @@ void DomainMapper_Impl::ChainTextFrames()
//Sometimes the shape names have not been imported. If not, we
may have a fallback name.
//Set name later, only if required for linking.
- if( sShapeName.isEmpty() )
- aChainStruct.bShapeNameSet = false;
- else
- {
- aChainStruct.bShapeNameSet = true;
- sLinkChainName = sShapeName;
- }
+ aChainStruct.shapeName = sShapeName;
- if( !sLinkChainName.isEmpty() )
+ if (!sLinkChainName.isEmpty())
{
aChainStruct.xShape = rTextFrame;
aTextFramesForChainingHelper[sLinkChainName] = aChainStruct;
}
+ if (aChainStruct.s_mso_next_textbox.isEmpty())
+ { // no VML chaining => try to chain DrawingML via IDs
+ aChainStruct.xShape = rTextFrame;
+ if (!sLinkChainName.isEmpty())
+ { // for member of group shapes, TestTdf73499
+ aChainStruct.shapeName = sLinkChainName;
+ }
+ chainingWPS.emplace_back(aChainStruct);
+ }
}
//if mso-next-textbox tags are provided, create those vml-style links
first. Afterwards we will make dml-style id/seq links.
@@ -3530,22 +3534,22 @@ void DomainMapper_Impl::ChainTextFrames()
if( nextFinder != aTextFramesForChainingHelper.end() )
{
//if the frames have no name yet, then set them.
LinkDisplayName / ChainName are read-only.
- if( !msoItem.second.bShapeNameSet )
+ if (msoItem.second.shapeName.isEmpty())
{
uno::Reference< container::XNamed > xNamed(
msoItem.second.xShape, uno::UNO_QUERY );
if ( xNamed.is() )
{
xNamed->setName( msoItem.first );
- msoItem.second.bShapeNameSet = true;
+ msoItem.second.shapeName = msoItem.first;
}
}
- if( !nextFinder->second.bShapeNameSet )
+ if (nextFinder->second.shapeName.isEmpty())
{
uno::Reference< container::XNamed > xNamed(
nextFinder->second.xShape, uno::UNO_QUERY );
if ( xNamed.is() )
{
xNamed->setName( nextFinder->first );
- nextFinder->second.bShapeNameSet = true;
+ nextFinder->second.shapeName = msoItem.first;
}
}
@@ -3553,7 +3557,7 @@ void DomainMapper_Impl::ChainTextFrames()
uno::Reference<beans::XPropertySet>
xPropertySet(xTextContent, uno::UNO_QUERY);
//The reverse chaining happens automatically, so only one
direction needs to be set
- xPropertySet->setPropertyValue(sChainNextName,
uno::makeAny(nextFinder->first));
+ xPropertySet->setPropertyValue(sChainNextName,
uno::makeAny(nextFinder->second.shapeName));
//the last item in an mso-next-textbox chain is
indistinguishable from id/seq items. Now that it is handled, remove it.
if( nextFinder->second.s_mso_next_textbox.isEmpty() )
@@ -3566,26 +3570,23 @@ void DomainMapper_Impl::ChainTextFrames()
const sal_Int32 nDirection = 1;
//Finally - go through and attach the chains based on matching ID and
incremented sequence number (dml-style).
- for (const auto& rOuter : aTextFramesForChainingHelper)
+ for (const auto& rOuter : chainingWPS)
{
- if( rOuter.second.s_mso_next_textbox.isEmpty() ) //non-empty ones
already handled earlier - so skipping them now.
- {
- for (const auto& rInner : aTextFramesForChainingHelper)
+ for (const auto& rInner : chainingWPS)
{
- if ( rInner.second.nId == rOuter.second.nId )
+ if (rInner.nId == rOuter.nId)
{
- if ( rInner.second.nSeq == ( rOuter.second.nSeq +
nDirection ) )
+ if (rInner.nSeq == (rOuter.nSeq + nDirection))
{
- uno::Reference<text::XTextContent>
xTextContent(rOuter.second.xShape, uno::UNO_QUERY_THROW);
+ uno::Reference<text::XTextContent> const
xTextContent(rOuter.xShape, uno::UNO_QUERY_THROW);
uno::Reference<beans::XPropertySet>
xPropertySet(xTextContent, uno::UNO_QUERY);
//The reverse chaining happens automatically, so
only one direction needs to be set
- xPropertySet->setPropertyValue(sChainNextName,
uno::makeAny(rInner.first));
+ xPropertySet->setPropertyValue(sChainNextName,
uno::makeAny(rInner.shapeName));
break ; //there cannot be more than one next frame
}
}
}
- }
}
m_vTextFramesForChaining.clear(); //clear the vector
}
diff --git a/writerfilter/source/dmapper/GraphicImport.cxx
b/writerfilter/source/dmapper/GraphicImport.cxx
index f9c8b453a617..891f26f95c43 100644
--- a/writerfilter/source/dmapper/GraphicImport.cxx
+++ b/writerfilter/source/dmapper/GraphicImport.cxx
@@ -367,11 +367,12 @@ public:
{
try
{
- // Ask the graphic naming helper to find out the name for this
- // object: It's around till the end of the import, so it remembers
- // what's the first free name.
- uno::Reference< container::XNamed > xNamed(
xGraphicObjectProperties, uno::UNO_QUERY_THROW );
-
xNamed->setName(rDomainMapper.GetGraphicNamingHelper().NameGraphic(sName));
+ if (!sName.isEmpty())
+ {
+ uno::Reference<container::XNamed> const
xNamed(xGraphicObjectProperties, uno::UNO_QUERY_THROW);
+ xNamed->setName(sName);
+ }
+ // else: name is automatically generated by
SwDoc::MakeFlySection_()
xGraphicObjectProperties->setPropertyValue(getPropertyName(
PROP_DESCRIPTION ),
uno::makeAny( sAlternativeText ));
