svx/qa/unit/classicshapes.cxx | 7 +-
svx/qa/unit/customshapes.cxx | 56 +++++++++-------------
svx/source/core/graphichelper.cxx | 3 -
svx/source/dialog/SafeModeDialog.cxx | 3 -
svx/source/form/fmshimp.cxx | 3 -
svx/source/form/fmsrcimp.cxx | 6 --
svx/source/form/navigatortree.cxx | 6 --
svx/source/form/tbxform.cxx | 3 -
svx/source/gallery2/galobj.cxx | 5 -
svx/source/sidebar/area/AreaPropertyPanelBase.cxx | 3 -
svx/source/svdraw/svdedtv1.cxx | 3 -
svx/source/svdraw/svdedxv.cxx | 8 +--
svx/source/svdraw/svdoashp.cxx | 55 +++++++--------------
svx/source/svdraw/svdpntv.cxx | 3 -
svx/source/table/svdotable.cxx | 3 -
svx/source/table/tablecontroller.cxx | 3 -
svx/source/tbxctrls/extrusioncontrols.cxx | 4 -
svx/source/tbxctrls/fillctrl.cxx | 3 -
svx/source/unodraw/unoshap2.cxx | 3 -
svx/source/xml/xmlxtexp.cxx | 3 -
20 files changed, 67 insertions(+), 116 deletions(-)
New commits:
commit 017862727a19f419313eead325f1dbc2936088ed
Author: Stephan Bergmann <sberg...@redhat.com>
AuthorDate: Fri Jun 5 10:18:21 2020 +0200
Commit: Stephan Bergmann <sberg...@redhat.com>
CommitDate: Fri Jun 5 11:59:17 2020 +0200
Upcoming loplugin:elidestringvar: svx
Change-Id: Ia7b4f69361b6cc29f6e5c0093b13cf0b48e25ba3
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/95576
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sberg...@redhat.com>
diff --git a/svx/qa/unit/classicshapes.cxx b/svx/qa/unit/classicshapes.cxx
index b03210d12c20..3e519418ed84 100644
--- a/svx/qa/unit/classicshapes.cxx
+++ b/svx/qa/unit/classicshapes.cxx
@@ -73,8 +73,7 @@ CPPUNIT_TEST_FIXTURE(ClassicshapesTest,
testTdf98584ShearVertical)
// They are converted to rotate * shear horizontal * scale.
// Besides using a wrong sign in shear angle, error was, that
TRSetGeometry of SdrPathObj did
// not consider the additional scaling (tdf#98565).
- const OUString sFileName("tdf98584_ShearVertical.odg");
- const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) +
sFileName);
+ const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) +
"tdf98584_ShearVertical.odg");
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
@@ -149,8 +148,8 @@ CPPUNIT_TEST_FIXTURE(ClassicshapesTest,
testTdf98583ShearHorizontal)
// LT 8000,5000 and RB 14000, 9000, which means width 6001, height 4001.
// Error was, that not the mathematical matrix was used, but the API
matrix, which has
// wrong sign in shear angle.
- const OUString sFileName("tdf98583_ShearHorizontal.odp");
- const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) +
sFileName);
+ const OUString sURL(m_directories.getURLFromSrc(sDataDirectory)
+ + "tdf98583_ShearHorizontal.odp");
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.presentation.PresentationDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
diff --git a/svx/qa/unit/customshapes.cxx b/svx/qa/unit/customshapes.cxx
index a21652113ef8..ce2f06c42bfe 100644
--- a/svx/qa/unit/customshapes.cxx
+++ b/svx/qa/unit/customshapes.cxx
@@ -183,8 +183,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testWidthOrientationCommandU)
// tdf121845 custom shape with command U (angleellipse) is wrongly drawn
// Load a document with path "M 750 0 L 750 500 250 500 250 0 U 500 0 500
500 0 180 N"
// in viewBox="0 0 1000 500" and width="10cm", height="5cm".
- const OUString sFileName("tdf121845_WidthOrientation_command_U.odg");
- const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
sFileName;
+ const OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf121845_WidthOrientation_command_U.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
// Error was, that the width and height of the ellipse was halved and that
the ellipse
@@ -207,8 +207,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML)
// tdf121845 custom shape with command U (angleellipse) is wrongly drawn
// Load a document which was converted from VML to doc by Word. It had a
VML
// path="m750,al500,,500,500,,-11796480e" resulting in a lower half circle.
- const OUString sFileName("tdf121845_HalfEllipseVML.doc");
- const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
sFileName;
+ const OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf121845_HalfEllipseVML.doc";
mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
// Error was, that a full circle instead of the half circle was draw.
@@ -227,8 +227,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testLargeSwingAngleVML)
// tdf121845 custom shape with command U (angleellipse) is wrongly drawn
// Load a document which was converted from VML to doc by Word. It had a
VML
// path="al50,50,45,45,2621440,31457280e" resulting in a full circle plus
120 deg segment.
- const OUString sFileName("tdf121845_start40_swing480.doc");
- const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
sFileName;
+ const OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf121845_start40_swing480.doc";
mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
// Error was, that only the 120 deg segment was drawn.
@@ -247,8 +247,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf121845_two_commands_U)
// Load a document with path "U 950 250 200 200 90 180 250 250 200 200 180
270 N"
// Error was, that the second ellipse segment was interpreted as command T
and
// thus a line from first to second segment was drawn.
- const OUString sFileName("tdf121845_Two_commands_U.odg");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf121845_Two_commands_U.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -269,8 +268,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf124212_handle_position)
// default viewBox. Load a document with svg:viewBox="10800 0 10800 21600"
// Error was, that moving the controller results in a handle position that
// does not reflect the movement.
- const OUString sFileName("tdf124212_handle_position.odg");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf124212_handle_position.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -294,8 +292,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf124029_arc_position)
// tdf121029 MS binary custom shape mso_sptArc has wrong position
// MS uses the sector for position reference. Error was, that
// LibreOffice has used the underlying ellipse.
- const OUString sFileName("tdf124029_Arc_position.doc");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf124029_Arc_position.doc";
mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -313,8 +310,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf124740_handle_path_coordsystem)
// tdf124740 OOXML shape with handle and w and h attribute on path has
wrong
// handle position
// The handle position was scaled erroneously twice.
- const OUString sFileName("tdf124740_HandleInOOXMLUserShape.pptx");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf124740_HandleInOOXMLUserShape.pptx";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -339,8 +336,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf115813_OOXML_XY_handle)
// Connectors are included as ordinary shapes to prevent converting.
// Error was, that the handle movement and the changes to the shape did
not follow
// the mouse movement.
- const OUString sFileName("tdf115813_HandleMovementOOXMLPresetShapes.pptx");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory)
+ + "tdf115813_HandleMovementOOXMLPresetShapes.pptx";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
@@ -398,8 +395,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testQuadraticCurveTo)
// When converting to cubic Bezier curve, this had resulted in a wrong
first control point.
// The quadraticcurveto segment starts in shape center in the test file.
The first control
// point should produce a horizontal tangent in the start point.
- const OUString sFileName("tdf125782_QuadraticCurveTo.odg");
- const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
sFileName;
+ const OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf125782_QuadraticCurveTo.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
uno::Reference<drawing::XShape> xShape(getShape(0));
@@ -419,8 +416,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf126512_OOXML_handle_in_ODP)
// opened and exported to ODF format by LibreOffice.
// Error was, that for shapes, which were originally imported from OOXML,
the handles
// could not be moved at all.
- const OUString sFileName("tdf126512_OOXMLHandleMovementInODF.odp");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf126512_OOXMLHandleMovementInODF.odp";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
@@ -467,8 +464,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Mirror)
// and therefore equals approximately the text frame.
// Error was, that because of wrong calculation, the flipped shapes do not
use the
// text frame but the frame rectangle for their text.
- const OUString sFileName("tdf127785_Mirror.odp");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf127785_Mirror.odp";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
OUString sErrors; // sErrors collects the errors and should be empty in
case all is OK.
@@ -510,8 +506,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf126060_3D_Z_Rotation)
// and the text has 3D z rotation. When we open the document we
// should see the text vertically and rotated from text bound center not
text box.
- const OUString sFileName("tdf126060_3D_Z_Rotation.pptx");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf126060_3D_Z_Rotation.pptx";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
OUString sErrors; // sErrors collects the errors and should be empty in
case all is OK.
@@ -542,8 +537,8 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf127785_Asymmetric)
// the text and therefore equals approximately the text frame.
// Error was, that the 180deg text rotation was not compensated for the
position of
// the flipped text box.
- const OUString sFileName("tdf127785_asymmetricTextBoxFlipV.odg");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL
+ = m_directories.getURLFromSrc(sDataDirectory) +
"tdf127785_asymmetricTextBoxFlipV.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
OUString sErrors; // sErrors collects the errors and should be empty in
case all is OK.
@@ -576,8 +571,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf127785_TextRotateAngle)
// surrounds the text and therefore equals approximately the text frame.
// Error was, that the compensation for the 180° rotation added for
vertical
// flip were not made to the text box position but to the text matrix.
- const OUString sFileName("tdf127785_TextRotateAngle.odp");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf127785_TextRotateAngle.odp";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
OUString sErrors; // sErrors collects the errors and should be empty in
case all is OK.
@@ -608,8 +602,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf128413_tbrlOnOff)
// The document contains a rotated shape with text. The error was, that
switching
// tb-rl writing-mode on, changed the shape size and position.
- const OUString sFileName("tdf128413_tbrl_OnOff.odp");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf128413_tbrl_OnOff.odp";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
@@ -639,8 +632,7 @@ CPPUNIT_TEST_FIXTURE(CustomshapesTest,
testTdf129532_MatrixFlipV)
// attribute. That should result in mirroring on the x-axis. Error was,
that the lines
// which are drawn on the shape rectangle were mirrored, but not the
rectangle itself.
// The rectangle was only shifted.
- const OUString sFileName("tdf129532_MatrixFlipV.odg");
- OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName;
+ OUString sURL = m_directories.getURLFromSrc(sDataDirectory) +
"tdf129532_MatrixFlipV.odg";
mxComponent = loadFromDesktop(sURL,
"com.sun.star.comp.drawing.DrawingDocument");
CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is());
OUString sErrors; // sErrors collects the errors and should be empty in
case all is OK.
diff --git a/svx/source/core/graphichelper.cxx
b/svx/source/core/graphichelper.cxx
index c4755ff10863..fb483c5bfe54 100644
--- a/svx/source/core/graphichelper.cxx
+++ b/svx/source/core/graphichelper.cxx
@@ -132,9 +132,8 @@ bool lcl_ExecuteFilterDialog( const Sequence< PropertyValue
>& rPropsForDialog,
bool bStatus = false;
try
{
- const OUString
aServiceName("com.sun.star.svtools.SvFilterOptionsDialog");
Reference< XExecutableDialog > xFilterDialog(
- comphelper::getProcessServiceFactory()->createInstance(
aServiceName ), UNO_QUERY );
+ comphelper::getProcessServiceFactory()->createInstance(
"com.sun.star.svtools.SvFilterOptionsDialog" ), UNO_QUERY );
Reference< XPropertyAccess > xFilterProperties( xFilterDialog,
UNO_QUERY );
if( xFilterDialog.is() && xFilterProperties.is() )
diff --git a/svx/source/dialog/SafeModeDialog.cxx
b/svx/source/dialog/SafeModeDialog.cxx
index b74d2a93dae2..6cd0f306ad34 100644
--- a/svx/source/dialog/SafeModeDialog.cxx
+++ b/svx/source/dialog/SafeModeDialog.cxx
@@ -301,8 +301,7 @@ namespace {
IMPL_LINK(SafeModeDialog, CreateZipBtnHdl, weld::Button&, /*rBtn*/, void)
{
- const OUString zipFileName("libreoffice-profile.zip");
- const OUString
zipFileURL(comphelper::BackupFileHelper::getUserProfileURL() + "/" +
zipFileName);
+ const OUString
zipFileURL(comphelper::BackupFileHelper::getUserProfileURL() +
"/libreoffice-profile.zip");
osl::File::remove(zipFileURL); // Remove previous exports
try
{
diff --git a/svx/source/form/fmshimp.cxx b/svx/source/form/fmshimp.cxx
index 6407f74e9fbf..3ffa410e8fc6 100644
--- a/svx/source/form/fmshimp.cxx
+++ b/svx/source/form/fmshimp.cxx
@@ -3421,8 +3421,7 @@ void FmXFormShell::CreateExternalView_Lock()
// column type : listbox
pDispatchArgs->Name = FMARG_ADDCOL_COLUMNTYPE;
- OUString fColName = FM_COL_LISTBOX;
- pDispatchArgs->Value <<= fColName;
+ pDispatchArgs->Value <<= OUString(FM_COL_LISTBOX);
// pDispatchArgs->Value <<= (OUString)FM_COL_LISTBOX;
++pDispatchArgs;
diff --git a/svx/source/form/fmsrcimp.cxx b/svx/source/form/fmsrcimp.cxx
index 82a6313a9ae1..8510a1f2692b 100644
--- a/svx/source/form/fmsrcimp.cxx
+++ b/svx/source/form/fmsrcimp.cxx
@@ -780,10 +780,8 @@ void FmSearchEngine::SearchNextImpl()
{ // since in all other cases * and ? in the search string are of
course
// also allowed, but should not count as WildCards, I need to
normalize
OUString aTmp(strSearchExpression);
- const OUString s_sStar("\\*");
- const OUString s_sQuotation("\\?");
- aTmp = aTmp.replaceAll("*", s_sStar);
- aTmp = aTmp.replaceAll("?", s_sQuotation);
+ aTmp = aTmp.replaceAll("*", "\\*");
+ aTmp = aTmp.replaceAll("?", "\\?");
strSearchExpression = aTmp;
switch (m_nPosition)
diff --git a/svx/source/form/navigatortree.cxx
b/svx/source/form/navigatortree.cxx
index 2f62c697eda4..e1410282fed3 100644
--- a/svx/source/form/navigatortree.cxx
+++ b/svx/source/form/navigatortree.cxx
@@ -460,8 +460,7 @@ namespace svxform
pFormModel->BegUndo(aUndoStr);
// slot was valid for (exactly) one selected form
- OUString fControlName = FM_COMPONENT_HIDDEN;
- NewControl( fControlName,
*m_arrCurrentSelection.begin(), true );
+ NewControl( FM_COMPONENT_HIDDEN,
*m_arrCurrentSelection.begin(), true );
pFormModel->EndUndo();
}
else if (sIdent == "cut")
@@ -952,8 +951,7 @@ namespace svxform
for (sal_Int32 i=0; i<nCount; ++i)
{
// create new control
- OUString fControlName = FM_COMPONENT_HIDDEN;
- FmControlData* pNewControlData = NewControl( fControlName,
_pTargetEntry, false);
+ FmControlData* pNewControlData = NewControl(
FM_COMPONENT_HIDDEN, _pTargetEntry, false);
Reference< XPropertySet > xNewPropSet(
pNewControlData->GetPropertySet() );
// copy properties form old control to new one
diff --git a/svx/source/form/tbxform.cxx b/svx/source/form/tbxform.cxx
index 837aa154aabf..e6138af09060 100644
--- a/svx/source/form/tbxform.cxx
+++ b/svx/source/form/tbxform.cxx
@@ -203,8 +203,7 @@ SvxFmTbxCtlRecTotal::~SvxFmTbxCtlRecTotal()
VclPtr<InterimItemWindow> SvxFmTbxCtlRecTotal::CreateItemWindow( vcl::Window*
pParent )
{
- OUString const aSample("123456");
- m_xFixedText.reset(VclPtr<LabelItemWindow>::Create(pParent, aSample));
+ m_xFixedText.reset(VclPtr<LabelItemWindow>::Create(pParent, "123456"));
m_xFixedText->set_label("");
m_xFixedText->Show();
diff --git a/svx/source/gallery2/galobj.cxx b/svx/source/gallery2/galobj.cxx
index 5d97eb9f2a40..ef5972181105 100644
--- a/svx/source/gallery2/galobj.cxx
+++ b/svx/source/gallery2/galobj.cxx
@@ -386,10 +386,7 @@ SgaObjectSvDraw::SgaObjectSvDraw( const FmFormModel&
rModel, const INetURLObject
SvxGalleryDrawModel::SvxGalleryDrawModel()
: mpFormModel( nullptr )
{
-
- const OUString sFactoryURL("sdraw");
-
- mxDoc = SfxObjectShell::CreateObjectByFactoryName( sFactoryURL );
+ mxDoc = SfxObjectShell::CreateObjectByFactoryName( "sdraw" );
if( mxDoc.Is() )
{
diff --git a/svx/source/sidebar/area/AreaPropertyPanelBase.cxx
b/svx/source/sidebar/area/AreaPropertyPanelBase.cxx
index f83e9bafdebd..6cf416a68d15 100644
--- a/svx/source/sidebar/area/AreaPropertyPanelBase.cxx
+++ b/svx/source/sidebar/area/AreaPropertyPanelBase.cxx
@@ -287,9 +287,8 @@ IMPL_LINK_NOARG(AreaPropertyPanelBase, SelectFillTypeHdl,
weld::ComboBox&, void)
mxMTRAngle->hide();
mxBmpImport->hide();
mxToolBoxColor->show();
- const OUString aTmpStr;
const Color aColor = mpColorItem ? mpColorItem->GetColorValue() :
COL_AUTO;
- const XFillColorItem aXFillColorItem( aTmpStr, aColor );
+ const XFillColorItem aXFillColorItem( "", aColor );
// #i122676# change FillStyle and Color in one call
XFillStyleItem aXFillStyleItem(drawing::FillStyle_SOLID);
diff --git a/svx/source/svdraw/svdedtv1.cxx b/svx/source/svdraw/svdedtv1.cxx
index 3423ba65027b..439dba1a6ebb 100644
--- a/svx/source/svdraw/svdedtv1.cxx
+++ b/svx/source/svdraw/svdedtv1.cxx
@@ -1062,10 +1062,9 @@ void SdrEditView::SetAttrToMarked(const SfxItemSet&
rAttr, bool bReplaceAll)
}
if(bHasEEFeatureItems)
{
- const OUString aMessage("SdrEditView::SetAttrToMarked(): Setting
EE_FEATURE items at the SdrView does not make sense! It only leads to overhead
and unreadable documents.");
std::unique_ptr<weld::MessageDialog>
xInfoBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Info, VclButtonsType::Ok,
- aMessage));
+
"SdrEditView::SetAttrToMarked(): Setting EE_FEATURE items at the SdrView does
not make sense! It only leads to overhead and unreadable documents."));
xInfoBox->run();
}
}
diff --git a/svx/source/svdraw/svdedxv.cxx b/svx/source/svdraw/svdedxv.cxx
index 40aacd3474fb..6dddd270005c 100644
--- a/svx/source/svdraw/svdedxv.cxx
+++ b/svx/source/svdraw/svdedxv.cxx
@@ -2142,11 +2142,11 @@ bool SdrObjEditView::SetAttributes(const SfxItemSet&
rSet, bool bReplaceAll)
if (bHasEEFeatureItems)
{
- const OUString aMessage("SdrObjEditView::SetAttributes():
Setting EE_FEATURE items "
- "at the SdrView does not make sense!
It only leads to "
- "overhead and unreadable documents.");
std::unique_ptr<weld::MessageDialog>
xInfoBox(Application::CreateMessageDialog(
- nullptr, VclMessageType::Info, VclButtonsType::Ok,
aMessage));
+ nullptr, VclMessageType::Info, VclButtonsType::Ok,
+ "SdrObjEditView::SetAttributes(): Setting EE_FEATURE items
"
+ "at the SdrView does not make sense! It only leads to "
+ "overhead and unreadable documents."));
xInfoBox->run();
}
}
diff --git a/svx/source/svdraw/svdoashp.cxx b/svx/source/svdraw/svdoashp.cxx
index 3d4e6bfc409b..77c2d2d6ae51 100644
--- a/svx/source/svdraw/svdoashp.cxx
+++ b/svx/source/svdraw/svdoashp.cxx
@@ -467,8 +467,7 @@ bool SdrObjCustomShape::IsMirroredX() const
{
bool bMirroredX = false;
SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const OUString sMirroredX( "MirroredX" );
- css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredX );
+ css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( "MirroredX" );
if ( pAny )
*pAny >>= bMirroredX;
return bMirroredX;
@@ -477,8 +476,7 @@ bool SdrObjCustomShape::IsMirroredY() const
{
bool bMirroredY = false;
SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const OUString sMirroredY( "MirroredY" );
- css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( sMirroredY );
+ css::uno::Any* pAny = aGeometryItem.GetPropertyValueByName( "MirroredY" );
if ( pAny )
*pAny >>= bMirroredY;
return bMirroredY;
@@ -486,9 +484,8 @@ bool SdrObjCustomShape::IsMirroredY() const
void SdrObjCustomShape::SetMirroredX( const bool bMirrorX )
{
SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const OUString sMirroredX( "MirroredX" );
PropertyValue aPropVal;
- aPropVal.Name = sMirroredX;
+ aPropVal.Name = "MirroredX";
aPropVal.Value <<= bMirrorX;
aGeometryItem.SetPropertyValue( aPropVal );
SetMergedItem( aGeometryItem );
@@ -496,9 +493,8 @@ void SdrObjCustomShape::SetMirroredX( const bool bMirrorX )
void SdrObjCustomShape::SetMirroredY( const bool bMirrorY )
{
SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const OUString sMirroredY( "MirroredY" );
PropertyValue aPropVal;
- aPropVal.Name = sMirroredY;
+ aPropVal.Name = "MirroredY";
aPropVal.Value <<= bMirrorY;
aGeometryItem.SetPropertyValue( aPropVal );
SetMergedItem( aGeometryItem );
@@ -508,9 +504,7 @@ double SdrObjCustomShape::GetExtraTextRotation( const bool
bPreRotation ) const
{
const css::uno::Any* pAny;
const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY );
- const OUString sTextRotateAngle( "TextRotateAngle" );
- const OUString sTextPreRotateAngle( "TextPreRotateAngle" );
- pAny = rGeometryItem.GetPropertyValueByName( bPreRotation ?
sTextPreRotateAngle : sTextRotateAngle );
+ pAny = rGeometryItem.GetPropertyValueByName( bPreRotation ?
OUStringLiteral( "TextPreRotateAngle" ) : OUStringLiteral( "TextRotateAngle" )
);
double fExtraTextRotateAngle = 0.0;
if ( pAny )
*pAny >>= fExtraTextRotateAngle;
@@ -522,9 +516,8 @@ double SdrObjCustomShape::GetCameraRotation() const
const css::uno::Any* pAny;
double fTextCameraZRotateAngle = 0.0;
const SdrCustomShapeGeometryItem& rGeometryItem = GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY );
- const OUString sTextCameraZRotateAngle( "TextCameraZRotateAngle" );
- pAny = rGeometryItem.GetPropertyValueByName(sTextCameraZRotateAngle);
+ pAny = rGeometryItem.GetPropertyValueByName("TextCameraZRotateAngle");
if ( pAny )
*pAny >>= fTextCameraZRotateAngle;
@@ -1107,10 +1100,9 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
bool bIsDefaultGeometry = false;
OUString sShapeType;
- const OUString sType( "Type" );
const SdrCustomShapeGeometryItem aGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const Any *pAny = aGeometryItem.GetPropertyValueByName( sType );
+ const Any *pAny = aGeometryItem.GetPropertyValueByName( "Type" );
if ( pAny )
*pAny >>= sShapeType;
@@ -1122,8 +1114,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
{
case DefaultType::Viewbox :
{
- const OUString sViewBox( "ViewBox" );
- const Any* pViewBox =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sViewBox );
+ const Any* pViewBox =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
"ViewBox" );
css::awt::Rectangle aViewBox;
if (pViewBox && (*pViewBox >>= aViewBox) && pDefCustomShape)
{
@@ -1136,8 +1127,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::Path :
{
- const OUString sCoordinates( "Coordinates" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sCoordinates );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "Coordinates" );
if ( pAny && pDefCustomShape && pDefCustomShape->nVertices &&
pDefCustomShape->pVertices )
{
css::uno::Sequence<
css::drawing::EnhancedCustomShapeParameterPair> seqCoordinates1,
seqCoordinates2;
@@ -1161,8 +1151,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::Gluepoints :
{
- const OUString sGluePoints( "GluePoints" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sGluePoints );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "GluePoints" );
if ( pAny && pDefCustomShape && pDefCustomShape->nGluePoints &&
pDefCustomShape->pGluePoints )
{
css::uno::Sequence<
css::drawing::EnhancedCustomShapeParameterPair> seqGluePoints1, seqGluePoints2;
@@ -1187,8 +1176,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::Segments :
{
// Path/Segments
- const OUString sSegments( "Segments" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sSegments );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "Segments" );
if ( pAny )
{
css::uno::Sequence< css::drawing::EnhancedCustomShapeSegment >
seqSegments1, seqSegments2;
@@ -1231,8 +1219,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::StretchX :
{
- const OUString sStretchX( "StretchX" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sStretchX );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "StretchX" );
if ( pAny && pDefCustomShape )
{
sal_Int32 nStretchX = 0;
@@ -1249,8 +1236,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::StretchY :
{
- const OUString sStretchY( "StretchY" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sStretchY );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "StretchY" );
if ( pAny && pDefCustomShape )
{
sal_Int32 nStretchY = 0;
@@ -1267,8 +1253,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::Equations :
{
- const OUString sEquations( "Equations" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sEquations );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
"Equations" );
if ( pAny && pDefCustomShape && pDefCustomShape->nCalculation &&
pDefCustomShape->pCalculation )
{
css::uno::Sequence< OUString > seqEquations1, seqEquations2;
@@ -1292,8 +1277,7 @@ bool SdrObjCustomShape::IsDefaultGeometry( const
DefaultType eDefaultType ) cons
case DefaultType::TextFrames :
{
- const OUString sTextFrames( "TextFrames" );
- pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, sTextFrames );
+ pAny =
const_cast<SdrCustomShapeGeometryItem&>(aGeometryItem).GetPropertyValueByName(
sPath, "TextFrames" );
if ( pAny && pDefCustomShape && pDefCustomShape->nTextRect &&
pDefCustomShape->pTextRect )
{
css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame
> seqTextFrames1, seqTextFrames2;
@@ -2885,8 +2869,7 @@ void SdrObjCustomShape::SaveGeoData(SdrObjGeoData& rGeo)
const
rAGeo.bMirroredX = IsMirroredX();
rAGeo.bMirroredY = IsMirroredY();
- const OUString sAdjustmentValues( "AdjustmentValues" );
- const Any* pAny = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY
).GetPropertyValueByName( sAdjustmentValues );
+ const Any* pAny = GetMergedItem( SDRATTR_CUSTOMSHAPE_GEOMETRY
).GetPropertyValueByName( "AdjustmentValues" );
if ( pAny )
*pAny >>= rAGeo.aAdjustmentSeq;
}
@@ -2900,9 +2883,8 @@ void SdrObjCustomShape::RestGeoData(const SdrObjGeoData&
rGeo)
SetMirroredY( rAGeo.bMirroredY );
SdrCustomShapeGeometryItem rGeometryItem = GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY );
- const OUString sAdjustmentValues( "AdjustmentValues" );
PropertyValue aPropVal;
- aPropVal.Name = sAdjustmentValues;
+ aPropVal.Name = "AdjustmentValues";
aPropVal.Value <<= rAGeo.aAdjustmentSeq;
rGeometryItem.SetPropertyValue( aPropVal );
SetMergedItem( rGeometryItem );
@@ -3231,9 +3213,8 @@ OUString SdrObjCustomShape::GetCustomShapeName() const
|| aEngine == "com.sun.star.drawing.EnhancedCustomShapeEngine" )
{
OUString sShapeType;
- const OUString sType("Type");
const SdrCustomShapeGeometryItem& rGeometryItem( GetMergedItem(
SDRATTR_CUSTOMSHAPE_GEOMETRY ) );
- const Any* pAny = rGeometryItem.GetPropertyValueByName( sType );
+ const Any* pAny = rGeometryItem.GetPropertyValueByName( "Type" );
if ( pAny && ( *pAny >>= sShapeType ) )
sShapeName = EnhancedCustomShapeTypeNames::GetAccName( sShapeType
);
}
diff --git a/svx/source/svdraw/svdpntv.cxx b/svx/source/svdraw/svdpntv.cxx
index ccc47ca9c401..6e931e7f4504 100644
--- a/svx/source/svdraw/svdpntv.cxx
+++ b/svx/source/svdraw/svdpntv.cxx
@@ -947,10 +947,9 @@ void SdrPaintView::SetDefaultAttr(const SfxItemSet& rAttr,
bool bReplaceAll)
if(bHasEEFeatureItems)
{
- const OUString aMessage("SdrPaintView::SetDefaultAttr(): Setting
EE_FEATURE items at the SdrView does not make sense! It only leads to overhead
and unreadable documents.");
std::unique_ptr<weld::MessageDialog>
xInfoBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Info, VclButtonsType::Ok,
- aMessage));
+
"SdrPaintView::SetDefaultAttr(): Setting EE_FEATURE items at the SdrView does
not make sense! It only leads to overhead and unreadable documents."));
xInfoBox->run();
}
}
diff --git a/svx/source/table/svdotable.cxx b/svx/source/table/svdotable.cxx
index 7672e29cb021..6f9044f979e6 100644
--- a/svx/source/table/svdotable.cxx
+++ b/svx/source/table/svdotable.cxx
@@ -436,8 +436,7 @@ SdrTableObjImpl& SdrTableObjImpl::operator=( const
SdrTableObjImpl& rSource )
const OUString sStyleName( Reference< XNamed >( rSource.mxTableStyle,
UNO_QUERY_THROW )->getName() );
Reference< XStyleFamiliesSupplier >
xSFS(rTargetSdrModel.getUnoModel(), UNO_QUERY_THROW );
Reference< XNameAccess > xFamilyNameAccess( xSFS->getStyleFamilies(),
css::uno::UNO_SET_THROW );
- const OUString sFamilyName( "table" );
- Reference< XNameAccess > xTableFamilyAccess(
xFamilyNameAccess->getByName( sFamilyName ), UNO_QUERY_THROW );
+ Reference< XNameAccess > xTableFamilyAccess(
xFamilyNameAccess->getByName( "table" ), UNO_QUERY_THROW );
if( xTableFamilyAccess->hasByName( sStyleName ) )
{
diff --git a/svx/source/table/tablecontroller.cxx
b/svx/source/table/tablecontroller.cxx
index 9fa0c057565e..1264b9a2eb90 100644
--- a/svx/source/table/tablecontroller.cxx
+++ b/svx/source/table/tablecontroller.cxx
@@ -1068,8 +1068,7 @@ void SvxTableController::SetTableStyle( const SfxItemSet*
pArgs )
{
Reference< XStyleFamiliesSupplier > xSFS( rModel.getUnoModel(),
UNO_QUERY_THROW );
Reference< XNameAccess > xFamilyNameAccess( xSFS->getStyleFamilies(),
UNO_SET_THROW );
- const OUString sFamilyName( "table" );
- Reference< XNameAccess > xTableFamilyAccess(
xFamilyNameAccess->getByName( sFamilyName ), UNO_QUERY_THROW );
+ Reference< XNameAccess > xTableFamilyAccess(
xFamilyNameAccess->getByName( "table" ), UNO_QUERY_THROW );
if( xTableFamilyAccess->hasByName( pArg->GetValue() ) )
{
diff --git a/svx/source/tbxctrls/extrusioncontrols.cxx
b/svx/source/tbxctrls/extrusioncontrols.cxx
index 8f4e2fd5dc74..5bbec47357cf 100644
--- a/svx/source/tbxctrls/extrusioncontrols.cxx
+++ b/svx/source/tbxctrls/extrusioncontrols.cxx
@@ -453,8 +453,6 @@ IMPL_LINK(ExtrusionDepthWindow, SelectHdl,
weld::ToggleButton&, rButton, void)
if (mxCustom->get_active())
{
- const OUString aCommand( ".uno:ExtrusionDepthDialog" );
-
Sequence< PropertyValue > aArgs( 2 );
aArgs[0].Name = "Depth";
aArgs[0].Value <<= mfDepth;
@@ -463,7 +461,7 @@ IMPL_LINK(ExtrusionDepthWindow, SelectHdl,
weld::ToggleButton&, rButton, void)
rtl::Reference<svt::PopupWindowController> xControl(mxControl);
xControl->EndPopupMode();
- xControl->dispatchCommand(aCommand, aArgs);
+ xControl->dispatchCommand(".uno:ExtrusionDepthDialog", aArgs);
}
else
{
diff --git a/svx/source/tbxctrls/fillctrl.cxx b/svx/source/tbxctrls/fillctrl.cxx
index 588e77f07439..3d91e5cb823c 100644
--- a/svx/source/tbxctrls/fillctrl.cxx
+++ b/svx/source/tbxctrls/fillctrl.cxx
@@ -700,9 +700,8 @@ IMPL_LINK_NOARG(SvxFillToolBoxControl, SelectFillTypeHdl,
weld::ComboBox&, void)
{
mpLbFillAttr->hide();
mpToolBoxColor->show();
- const OUString aTmpStr;
const ::Color aColor = mpColorItem->GetColorValue();
- const XFillColorItem aXFillColorItem( aTmpStr, aColor );
+ const XFillColorItem aXFillColorItem( "", aColor );
// #i122676# change FillStyle and Color in one call
SfxViewFrame::Current()->GetDispatcher()->ExecuteList(
diff --git a/svx/source/unodraw/unoshap2.cxx b/svx/source/unodraw/unoshap2.cxx
index 81ee656205d8..1e70d9a28f58 100644
--- a/svx/source/unodraw/unoshap2.cxx
+++ b/svx/source/unodraw/unoshap2.cxx
@@ -1689,8 +1689,7 @@ void SAL_CALL SvxCustomShape::setPropertyValue( const
OUString& aPropertyName, c
// tdf#98163 Use a custom slot to have filter code flush the UNO
// API implementations of SdrObjCustomShape. Used e.g. by
// ~SdXMLCustomShapeContext, see there for more information
- const OUString
sFlushCustomShapeUnoApiObjects("FlushCustomShapeUnoApiObjects");
- if(sFlushCustomShapeUnoApiObjects == aPropertyName)
+ if("FlushCustomShapeUnoApiObjects" == aPropertyName)
{
SdrObjCustomShape* pTarget = dynamic_cast< SdrObjCustomShape*
>(pObject);
if(pTarget)
diff --git a/svx/source/xml/xmlxtexp.cxx b/svx/source/xml/xmlxtexp.cxx
index 68b5ea9bd326..27bd63fe9bcb 100644
--- a/svx/source/xml/xmlxtexp.cxx
+++ b/svx/source/xml/xmlxtexp.cxx
@@ -281,8 +281,7 @@ bool SvxXMLXTableExportComponent::save(
xGraphicStorageHandler = xGraphicHelper.get();
// Finally do the export
- const OUString aName;
- rtl::Reference< SvxXMLXTableExportComponent > xExporter( new
SvxXMLXTableExportComponent( xContext, aName, xWriter, xTable,
xGraphicStorageHandler ) );
+ rtl::Reference< SvxXMLXTableExportComponent > xExporter( new
SvxXMLXTableExportComponent( xContext, "", xWriter, xTable,
xGraphicStorageHandler ) );
bRet = xExporter->exportTable();
if( xGraphicHelper )
_______________________________________________
Libreoffice-commits mailing list
libreoffice-comm...@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/libreoffice-commits
