schema/libreoffice/OpenDocument-schema-v1.3+libreoffice.rng | 2
sw/qa/extras/layout/data/btlr-cell.odt |binary
sw/qa/extras/layout/layout.cxx | 32 +++++
sw/qa/uitest/table/tableProperties.py | 12 +-
sw/source/core/layout/newfrm.cxx | 66 ++++++------
sw/source/core/text/itrtxt.cxx | 8 +
sw/source/ui/table/tabledlg.cxx | 2
sw/uiconfig/swriter/ui/tabletextflowpage.ui | 7 -
8 files changed, 84 insertions(+), 45 deletions(-)
New commits:
commit b82fc5e685fc1472fdc79f67636ee60253118657
Author: Miklos Vajna <vmik...@collabora.com>
AuthorDate: Fri Feb 15 12:07:07 2019 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Jul 2 11:01:31 2019 +0200
sw btlr writing mode layout: fix multiple paragraphs
aVerticalLeftToRightBottomToTop was wrong, it mapped from physical to
logical, and it should be the other way around.
In practice this means that when SwTextFrame::AdjustFrame() is invoked
for a second lower, then nAdd will be a small positive (and not a large
negative) number, so the
warn:legacy.osl:20827:20827:sw/source/core/text/frmform.cxx:479: Ey
warning goes away and the second lower becomes visible.
Change-Id: I894fef4a89b1feeb333537ff7d76793130007ed8
Reviewed-on: https://gerrit.libreoffice.org/67862
Reviewed-by: Miklos Vajna <vmik...@collabora.com>
Tested-by: Jenkins
(cherry picked from commit 835d054434d0000a5741a5bfa5f577e855594c40)
diff --git a/sw/qa/extras/layout/data/btlr-cell.odt
b/sw/qa/extras/layout/data/btlr-cell.odt
index c010fa9f51b6..17a9c19eef25 100644
Binary files a/sw/qa/extras/layout/data/btlr-cell.odt and
b/sw/qa/extras/layout/data/btlr-cell.odt differ
diff --git a/sw/qa/extras/layout/layout.cxx b/sw/qa/extras/layout/layout.cxx
index 36f4c06f105e..c70b0d13d9da 100644
--- a/sw/qa/extras/layout/layout.cxx
+++ b/sw/qa/extras/layout/layout.cxx
@@ -2759,10 +2759,15 @@ void SwLayoutWriter::testBtlrCell()
#ifndef MACOSX // macOS fails with actual == 2662 for some reason.
// Without the accompanying fix in place, this test would have failed with
'Expected: 1915;
- // Actual : 1756', i.e. the AAA text was too close to the left cell
border due to an ascent vs
+ // Actual : 1756', i.e. the AAA1 text was too close to the left cell
border due to an ascent vs
// descent mismatch when calculating the baseline offset of the text
portion.
assertXPath(pXmlDoc, "//textarray[1]", "x", "1915");
assertXPath(pXmlDoc, "//textarray[1]", "y", "2707");
+
+ // Without the accompanying fix in place, this test would have failed with
'Expected: 269;
+ // Actual : 0', i.e. the AAA2 frame was not visible due to 0 width.
+ pXmlDoc = parseLayoutDump();
+ assertXPath(pXmlDoc,
"/root/page/body/tab/row/cell[1]/txt[2]/infos/bounds", "width", "269");
#endif
}
diff --git a/sw/source/core/layout/newfrm.cxx b/sw/source/core/layout/newfrm.cxx
index 0971c2d95a8e..94e016434e47 100644
--- a/sw/source/core/layout/newfrm.cxx
+++ b/sw/source/core/layout/newfrm.cxx
@@ -226,62 +226,62 @@ static SwRectFnCollection aVerticalLeftToRight = {
/**
* This is the same as horizontal, but rotated counter-clockwise by 90 degrees.
- * This means logical top is physical right, bottom is left, left is top,
- * finally right is bottom.
+ * This means logical top is physical left, bottom is right, left is bottom,
+ * finally right is top. Values map from logical to physical.
*/
static SwRectFnCollection aVerticalLeftToRightBottomToTop = {
- /*.fnGetTop =*/&SwRect::Right_,
- /*.fnGetBottom =*/&SwRect::Left_,
- /*.fnGetLeft =*/&SwRect::Top_,
- /*.fnGetRight =*/&SwRect::Bottom_,
+ /*.fnGetTop =*/&SwRect::Left_,
+ /*.fnGetBottom =*/&SwRect::Right_,
+ /*.fnGetLeft =*/&SwRect::Bottom_,
+ /*.fnGetRight =*/&SwRect::Top_,
/*.fnGetWidth =*/&SwRect::Height_,
/*.fnGetHeight =*/&SwRect::Width_,
- /*.fnGetPos =*/&SwRect::TopRight,
+ /*.fnGetPos =*/&SwRect::BottomLeft,
/*.fnGetSize =*/&SwRect::SwappedSize,
- /*.fnSetTop =*/&SwRect::Right_,
- /*.fnSetBottom =*/&SwRect::Left_,
- /*.fnSetLeft =*/&SwRect::Top_,
- /*.fnSetRight =*/&SwRect::Bottom_,
+ /*.fnSetTop =*/&SwRect::Left_,
+ /*.fnSetBottom =*/&SwRect::Right_,
+ /*.fnSetLeft =*/&SwRect::Bottom_,
+ /*.fnSetRight =*/&SwRect::Top_,
/*.fnSetWidth =*/&SwRect::Height_,
/*.fnSetHeight =*/&SwRect::Width_,
- /*.fnSubTop =*/&SwRect::AddRight,
- /*.fnAddBottom =*/&SwRect::SubLeft,
- /*.fnSubLeft =*/&SwRect::SubTop,
- /*.fnAddRight =*/&SwRect::AddBottom,
+ /*.fnSubTop =*/&SwRect::SubLeft,
+ /*.fnAddBottom =*/&SwRect::AddRight,
+ /*.fnSubLeft =*/&SwRect::AddBottom,
+ /*.fnAddRight =*/&SwRect::SubTop,
/*.fnAddWidth =*/&SwRect::AddHeight,
/*.fnAddHeight =*/&SwRect::AddWidth,
/*.fnSetPosX =*/&SwRect::SetPosY,
/*.fnSetPosY =*/&SwRect::SetPosX,
- /*.fnGetTopMargin =*/&SwFrame::GetRightMargin,
- /*.fnGetBottomMargin =*/&SwFrame::GetLeftMargin,
- /*.fnGetLeftMargin =*/&SwFrame::GetTopMargin,
- /*.fnGetRightMargin =*/&SwFrame::GetBottomMargin,
+ /*.fnGetTopMargin =*/&SwFrame::GetLeftMargin,
+ /*.fnGetBottomMargin =*/&SwFrame::GetRightMargin,
+ /*.fnGetLeftMargin =*/&SwFrame::GetBottomMargin,
+ /*.fnGetRightMargin =*/&SwFrame::GetTopMargin,
/*.fnSetXMargins =*/&SwFrame::SetTopBottomMargins,
/*.fnSetYMargins =*/&SwFrame::SetLeftRightMargins,
- /*.fnGetPrtTop =*/&SwFrame::GetPrtRight,
- /*.fnGetPrtBottom =*/&SwFrame::GetPrtLeft,
- /*.fnGetPrtLeft =*/&SwFrame::GetPrtTop,
- /*.fnGetPrtRight =*/&SwFrame::GetPrtBottom,
- /*.fnTopDist =*/&SwRect::GetRightDistance,
- /*.fnBottomDist =*/&SwRect::GetLeftDistance,
- /*.fnLeftDist =*/&SwRect::GetTopDistance,
- /*.fnRightDist =*/&SwRect::GetBottomDistance,
- /*.fnSetLimit =*/&SwFrame::SetMinLeft,
- /*.fnOverStep =*/&SwRect::OverStepLeft,
+ /*.fnGetPrtTop =*/&SwFrame::GetPrtLeft,
+ /*.fnGetPrtBottom =*/&SwFrame::GetPrtRight,
+ /*.fnGetPrtLeft =*/&SwFrame::GetPrtBottom,
+ /*.fnGetPrtRight =*/&SwFrame::GetPrtTop,
+ /*.fnTopDist =*/&SwRect::GetLeftDistance,
+ /*.fnBottomDist =*/&SwRect::GetRightDistance,
+ /*.fnLeftDist =*/&SwRect::GetBottomDistance,
+ /*.fnRightDist =*/&SwRect::GetTopDistance,
+ /*.fnSetLimit =*/&SwFrame::SetMaxRight,
+ /*.fnOverStep =*/&SwRect::OverStepRight,
- /*.fnSetPos =*/&SwRect::SetUpperRightCorner,
- /*.fnMakePos =*/&SwFrame::MakeLeftPos,
+ /*.fnSetPos =*/&SwRect::SetLowerLeftCorner,
+ /*.fnMakePos =*/&SwFrame::MakeRightPos,
/*.fnXDiff =*/&FirstMinusSecond,
/*.fnYDiff =*/&FirstMinusSecond,
/*.fnXInc =*/&SwIncrement,
/*.fnYInc =*/&SwIncrement,
- /*.fnSetLeftAndWidth =*/&SwRect::SetTopAndHeight,
- /*.fnSetTopAndHeight =*/&SwRect::SetRightAndWidth
+ /*.fnSetLeftAndWidth =*/&SwRect::SetBottomAndHeight,
+ /*.fnSetTopAndHeight =*/&SwRect::SetLeftAndWidth
};
SwRectFn fnRectHori = &aHorizontal;
commit 741d3a94133d48fe17f9f698745276312e0a6269
Author: Miklos Vajna <vmik...@collabora.com>
AuthorDate: Thu Feb 14 15:35:12 2019 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Jul 2 11:01:04 2019 +0200
sw btlr writing mode layout: fix baseline offset
The problem was that the x position of the btlr text had a 159 twips
difference (it was too close to the cell border), since the text portion
height -> baseline offset calculation worked with the descent, not with
the ascent.
The position of the text now matches exactly what Word does.
As a side-effect this means that multiple portions in a line and also
multiple lines in a text frame now work correctly.
Change-Id: Ic139db328e2a913e5cae4026886c3410cdab357d
Reviewed-on: https://gerrit.libreoffice.org/67823
Tested-by: Jenkins
Reviewed-by: Miklos Vajna <vmik...@collabora.com>
(cherry picked from commit a0bb480364c80192111ecab3501d63584e651ea3)
diff --git a/sw/qa/extras/layout/layout.cxx b/sw/qa/extras/layout/layout.cxx
index 153f8926b4a6..36f4c06f105e 100644
--- a/sw/qa/extras/layout/layout.cxx
+++ b/sw/qa/extras/layout/layout.cxx
@@ -2756,6 +2756,14 @@ void SwLayoutWriter::testBtlrCell()
// the orientation was 0 (layout did not take btlr direction request from
// doc model).
assertXPath(pXmlDoc, "//font[1]", "orientation", "900");
+
+#ifndef MACOSX // macOS fails with actual == 2662 for some reason.
+ // Without the accompanying fix in place, this test would have failed with
'Expected: 1915;
+ // Actual : 1756', i.e. the AAA text was too close to the left cell
border due to an ascent vs
+ // descent mismatch when calculating the baseline offset of the text
portion.
+ assertXPath(pXmlDoc, "//textarray[1]", "x", "1915");
+ assertXPath(pXmlDoc, "//textarray[1]", "y", "2707");
+#endif
}
CPPUNIT_TEST_SUITE_REGISTRATION(SwLayoutWriter);
diff --git a/sw/source/core/text/itrtxt.cxx b/sw/source/core/text/itrtxt.cxx
index 53c1c7c91b2b..0f08b824effe 100644
--- a/sw/source/core/text/itrtxt.cxx
+++ b/sw/source/core/text/itrtxt.cxx
@@ -274,7 +274,13 @@ sal_uInt16 SwTextCursor::AdjustBaseLine( const
SwLineLayout& rLine,
case SvxParaVertAlignItem::Align::Automatic :
if ( bAutoToCentered || GetInfo().GetTextFrame()->IsVertical()
)
{
- if( GetInfo().GetTextFrame()->IsVertLR() )
+ // Vertical text has these cases to calculate the baseline:
+ // - Implicitly TB and RL: the origo is the top right
corner, offset is the
+ // ascent.
+ // - (Implicitly TB and) LR: the origo is the top left
corner, offset is the
+ // descent.
+ // - BT and LR: the origo is the bottom left corner,
offset is the ascent.
+ if (GetInfo().GetTextFrame()->IsVertLR() &&
!GetInfo().GetTextFrame()->IsVertLRBT())
nOfst += rLine.Height() - ( rLine.Height() -
nPorHeight ) / 2 - nPorAscent;
else
nOfst += ( rLine.Height() - nPorHeight ) / 2 +
nPorAscent;
commit 976c14ec7d2f2f0629419c16331b908e8d2888c1
Author: Miklos Vajna <vmik...@collabora.com>
AuthorDate: Thu Feb 14 11:49:47 2019 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Jul 2 11:00:48 2019 +0200
sw btlr writing mode: add odf spec proposal URL
Change-Id: I7848677cf4c8246fc7a1833bec809945fb541b29
Reviewed-on: https://gerrit.libreoffice.org/67814
Reviewed-by: Miklos Vajna <vmik...@collabora.com>
Tested-by: Jenkins
(cherry picked from commit 3157a3a8332ad342fb2b44659123217fa3450168)
diff --git a/schema/libreoffice/OpenDocument-schema-v1.3+libreoffice.rng
b/schema/libreoffice/OpenDocument-schema-v1.3+libreoffice.rng
index 956ccc2f02e4..19786f82a7e1 100644
--- a/schema/libreoffice/OpenDocument-schema-v1.3+libreoffice.rng
+++ b/schema/libreoffice/OpenDocument-schema-v1.3+libreoffice.rng
@@ -2323,7 +2323,7 @@
xmlns:loext="urn:org:documentfoundation:names:experimental:office:xmlns:loext:1.
</rng:optional>
</rng:define>
- <!-- TODO no proposal -->
+ <!-- https://issues.oasis-open.org/browse/OFFICE-4030 -->
<rng:define name="common-writing-mode-attlist" combine="interleave">
<rng:optional>
<rng:attribute name="loext:writing-mode">
commit 494acf1c10678d619f7e494349698ae2d229d720
Author: Miklos Vajna <vmik...@collabora.com>
AuthorDate: Wed Feb 13 18:32:31 2019 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Jul 2 11:00:21 2019 +0200
sw btlr writing mode: add UI for this
There was only horizontal and vertical previously, so keep things simple
and talk about the BT and TB version of vertical, not mentioning the
LR/RL aspect.
Also rename the textdirection widget, so it's unique not only within the
tab page, but inside the dialog, so we can have uitest coverage for
this.
Change-Id: Ie396898fde03aca6cd37a29f049099fa4b2c5fc0
Reviewed-on: https://gerrit.libreoffice.org/67789
Reviewed-by: Miklos Vajna <vmik...@collabora.com>
Tested-by: Jenkins
(cherry picked from commit 081b753d4cb4f4a25073ca7de12a7bdaa9fc2be4)
diff --git a/sw/qa/uitest/table/tableProperties.py
b/sw/qa/uitest/table/tableProperties.py
index 009a807aa4b0..882ae0976ab2 100644
--- a/sw/qa/uitest/table/tableProperties.py
+++ b/sw/qa/uitest/table/tableProperties.py
@@ -121,10 +121,10 @@ class tableProperties(UITestCase):
keep.executeAction("CLICK", tuple())
headline = xDialog.getChild("headline")
headline.executeAction("CLICK", tuple())
-# textdirection = xDialog.getChild("textdirection") #the name of the
ui item is not unique
-# props = {"TEXT": "Vertical"}
-# actionProps = mkPropertyValues(props)
-# textdirection.executeAction("SELECT", actionProps)
+ textdirection = xDialog.getChild("textorientation")
+ props = {"TEXT": "Vertical (bottom to top)"}
+ actionProps = mkPropertyValues(props)
+ textdirection.executeAction("SELECT", actionProps)
vertorient = xDialog.getChild("vertorient")
props2 = {"TEXT": "Bottom"}
actionProps2 = mkPropertyValues(props2)
@@ -147,8 +147,8 @@ class tableProperties(UITestCase):
self.assertEqual(get_state_as_dict(keep)["Selected"], "true")
headline = xDialog.getChild("headline")
self.assertEqual(get_state_as_dict(headline)["Selected"], "true")
-# textdirection = xDialog.getChild("textdirection")
-# self.assertEqual(get_state_as_dict(textdirection)["SelectEntryText"],
"Vertical")
+ textdirection = xDialog.getChild("textorientation")
+ self.assertEqual(get_state_as_dict(textdirection)["SelectEntryText"],
"Vertical (bottom to top)")
vertorient = xDialog.getChild("vertorient")
self.assertEqual(get_state_as_dict(vertorient)["SelectEntryText"],
"Bottom")
xOKBtn = xDialog.getChild("ok")
diff --git a/sw/source/ui/table/tabledlg.cxx b/sw/source/ui/table/tabledlg.cxx
index b19711eb2502..c38a2f62d4ad 100644
--- a/sw/source/ui/table/tabledlg.cxx
+++ b/sw/source/ui/table/tabledlg.cxx
@@ -1226,7 +1226,7 @@ SwTextFlowPage::SwTextFlowPage(TabPageParent pParent,
const SfxItemSet& rSet)
, m_xHeadLineCB(m_xBuilder->weld_check_button("headline"))
, m_xRepeatHeaderCombo(m_xBuilder->weld_widget("repeatheader"))
, m_xRepeatHeaderNF(m_xBuilder->weld_spin_button("repeatheadernf"))
- , m_xTextDirectionLB(m_xBuilder->weld_combo_box("textdirection"))
+ , m_xTextDirectionLB(m_xBuilder->weld_combo_box("textorientation"))
, m_xVertOrientLB(m_xBuilder->weld_combo_box("vertorient"))
{
m_xPgBrkCB->connect_toggled(LINK(this, SwTextFlowPage, PageBreakHdl_Impl));
diff --git a/sw/uiconfig/swriter/ui/tabletextflowpage.ui
b/sw/uiconfig/swriter/ui/tabletextflowpage.ui
index 6ac2c41ab08e..ef46e8eafc96 100644
--- a/sw/uiconfig/swriter/ui/tabletextflowpage.ui
+++ b/sw/uiconfig/swriter/ui/tabletextflowpage.ui
@@ -283,7 +283,7 @@
<property name="can_focus">False</property>
<property name="label" translatable="yes"
context="tabletextflowpage|label40">Text _orientation</property>
<property name="use_underline">True</property>
- <property
name="mnemonic_widget">textdirection</property>
+ <property
name="mnemonic_widget">textorientation</property>
</object>
<packing>
<property name="left_attach">0</property>
@@ -291,13 +291,14 @@
</packing>
</child>
<child>
- <object class="GtkComboBoxText" id="textdirection">
+ <object class="GtkComboBoxText" id="textorientation">
<property name="visible">True</property>
<property name="can_focus">False</property>
<items>
<item id="0" translatable="yes"
context="tabletextflowpage|liststore1">Horizontal</item>
- <item id="2" translatable="yes"
context="tabletextflowpage|liststore1">Vertical</item>
+ <item id="2" translatable="yes"
context="tabletextflowpage|liststore1">Vertical (top to bottom)</item>
<item id="4" translatable="yes"
context="tabletextflowpage|liststore1">Use superordinate object settings</item>
+ <item id="5" translatable="yes"
context="tabletextflowpage|liststore1">Vertical (bottom to top)</item>
</items>
</object>
<packing>
commit ac1ca418d1f3a803102d2508f6e0029ad65c4af7
Author: Miklos Vajna <vmik...@collabora.com>
AuthorDate: Wed Feb 13 15:19:56 2019 +0100
Commit: Miklos Vajna <vmik...@collabora.com>
CommitDate: Tue Jul 2 10:59:30 2019 +0200
sw btlr writing mode: add a layout-level test
Fails with commit e8b9572bf89f55463f2c879a401ed62efc165d95 (sw btlr
writing mode: implement initial layout, 2019-02-12) reverted.
(cherry picked from commit bef3818dbedba467a257e2573e298d98062be37b)
Conflicts:
sw/qa/extras/layout/layout.cxx
Change-Id: Ic68ef53a8b5bf86678d7e67c9960501f23341268
diff --git a/sw/qa/extras/layout/data/btlr-cell.odt
b/sw/qa/extras/layout/data/btlr-cell.odt
new file mode 100644
index 000000000000..c010fa9f51b6
Binary files /dev/null and b/sw/qa/extras/layout/data/btlr-cell.odt differ
diff --git a/sw/qa/extras/layout/layout.cxx b/sw/qa/extras/layout/layout.cxx
index 3239b1cac3aa..153f8926b4a6 100644
--- a/sw/qa/extras/layout/layout.cxx
+++ b/sw/qa/extras/layout/layout.cxx
@@ -68,6 +68,7 @@ public:
void testTdf115094();
void testTdf118719();
void testTdf123651();
+ void testBtlrCell();
CPPUNIT_TEST_SUITE(SwLayoutWriter);
CPPUNIT_TEST(testRedlineFootnotes);
@@ -108,6 +109,7 @@ public:
CPPUNIT_TEST(testTdf115094);
CPPUNIT_TEST(testTdf118719);
CPPUNIT_TEST(testTdf123651);
+ CPPUNIT_TEST(testBtlrCell);
CPPUNIT_TEST_SUITE_END();
private:
@@ -2739,6 +2741,23 @@ void SwLayoutWriter::testTdf123651()
assertXPath(pXmlDoc, "//SwAnchoredDrawObject/bounds", "top", "7639");
}
+void SwLayoutWriter::testBtlrCell()
+{
+ SwDoc* pDoc = createDoc("btlr-cell.odt");
+ SwDocShell* pShell = pDoc->GetDocShell();
+
+ // Dump the rendering of the first page as an XML file.
+ std::shared_ptr<GDIMetaFile> xMetaFile = pShell->GetPreviewMetaFile();
+ MetafileXmlDump dumper;
+ xmlDocPtr pXmlDoc = dumper.dumpAndParse(*xMetaFile);
+ CPPUNIT_ASSERT(pXmlDoc);
+
+ // Without the accompanying fix in place, this test would have failed, as
+ // the orientation was 0 (layout did not take btlr direction request from
+ // doc model).
+ assertXPath(pXmlDoc, "//font[1]", "orientation", "900");
+}
+
CPPUNIT_TEST_SUITE_REGISTRATION(SwLayoutWriter);
CPPUNIT_PLUGIN_IMPLEMENT();
_______________________________________________
Libreoffice-commits mailing list
libreoffice-comm...@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/libreoffice-commits
