https://bugs.documentfoundation.org/show_bug.cgi?id=163252
--- Comment #2 from Callegar <sergio.calleg...@gmail.com> --- More triaging. This has nothing to do with the use of a different scaling on the projector screen. The issue is also present when not using an external screen at all: e.g. serving the presentation on the single screen of a laptop. The issue is evident whenever using a scaling factor != 100%. The transition effect between the slides is played at a wrong scaling factor. This visually appears to be the scaling factor to the power of two. Namely, if the scaling factor is 1.5, the effect seems to be played with a scaling approximately equal to 2, so that during the transition effect, only a part of the slide is shown. When the transition ends, with a glitch the "static" slide at the correct scaling factor is eventually displayed. Note that the glitch is present even when the scaling factor is 100% and the transition is played correctly: at its end, there is in any case a quick flashing of the display. -- You are receiving this mail because: You are the assignee for the bug.