>3. Try booting, and watch to see if you can spot the first error message from 
>the bootscripts.  When that appears, the old Ctrl-S (to stop the console 
>scrolling) might work.  If you can read the gist of the message, and what 
>script it came from, you will be on the way towards sorting it out.  If Ctrl-S 
>does work, Ctrl-Q probably resumes console output.  But rebooting after the 
>first critical error is probably the way to go: Magic SysRQ is at 
>Alt-PrintScreen, there is various documentation, but for boot (or shutdown!) 
>issues it's usually adequate to do Alt SysRQ s [ sync, if anything is mounted 
>- wait a few seconds ], Alt SysRQ u [ to unmount, again if anything is mounted 
>- wait for a message that drives have been remounted R/O ]. and then Alt SysRQ 
>b to boot.


CTRL s did not work but scroll lock did (go figure).

I see lots of " Read only file systems ... no such file or directory" for 
everything it trys to access.


I see this on /dev/sro
                        /dev/sda
                        /dev/sda1
                        /dev/sda2
                        /dev/sda3  "swapon: Read Only ... /dev/sda3 no such 
file or directory"


My host ubuntu 12.04 is on sda1... LFS is on sda2 ... swap is on sda3.


many many times I see "read only" and "no such file or directory".









-- 
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page

Reply via email to