On Tue, Nov 01, 2011 at 08:59:58PM +0000, Ken Moffat wrote: > This is embarrassing, but I guess I can live with that if someone > is abie to help diagnose the problem :) > Might be easier if I remembered to include the log (short enough, I'll put it inline) > > Highlights of the log (first few lines from 3.0.4, kernel finding > the disks and starting mdadm, error messages from smartd because the > devices don't exist) attached. >
Nov 1 19:08:47 milliways syslogd 1.5.0: restart. Nov 1 19:08:47 milliways kernel: klogd 1.5.0, log source = /proc/kmsg started. Nov 1 19:08:47 milliways kernel: Cannot find map file. Nov 1 19:08:47 milliways kernel: Loaded 39424 symbols from 9 modules. Nov 1 19:08:47 milliways kernel: Linux version 3.0.4 (root@milliways) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Nov 1 19:00:11 GMT 2011 Nov 1 19:08:47 milliways kernel: Command line: BOOT_IMAGE=/vmlinuz-3.0.4-sda5 root=/dev/sda5 vga=792 ro [...] Nov 1 19:08:47 milliways kernel: ata1.00: configured for UDMA/133 Nov 1 19:08:47 milliways kernel: ata4.00: configured for UDMA/100 Nov 1 19:08:47 milliways kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: [sda] Write Protect is off Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 1 19:08:47 milliways kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 1 19:08:47 milliways kernel: scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: [sdb] Write Protect is off Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 Nov 1 19:08:47 milliways kernel: sdb: sdb1 Nov 1 19:08:47 milliways kernel: ata3.00: configured for UDMA/133 Nov 1 19:08:47 milliways kernel: sd 1:0:0:0: [sdb] Attached SCSI disk Nov 1 19:08:47 milliways kernel: sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > Nov 1 19:08:47 milliways kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 Nov 1 19:08:47 milliways kernel: sd 0:0:0:0: [sda] Attached SCSI disk Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0 Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: [sdc] Write Protect is off Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 1 19:08:47 milliways kernel: scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5 Nov 1 19:08:47 milliways kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Nov 1 19:08:47 milliways kernel: cdrom: Uniform CD-ROM driver Revision: 3.20 Nov 1 19:08:47 milliways kernel: sr 3:0:0:0: Attached scsi CD-ROM sr0 Nov 1 19:08:47 milliways kernel: sr 3:0:0:0: Attached scsi generic sg3 type 5 Nov 1 19:08:47 milliways kernel: sdc: sdc1 Nov 1 19:08:47 milliways kernel: sd 2:0:0:0: [sdc] Attached SCSI disk Nov 1 19:08:47 milliways kernel: md: Waiting for all devices to be available before autodetect Nov 1 19:08:47 milliways kernel: md: If you don't use raid, use raid=noautodetect Nov 1 19:08:47 milliways kernel: md: Autodetecting RAID arrays. Nov 1 19:08:47 milliways kernel: md: Scanned 2 and added 2 devices. Nov 1 19:08:47 milliways kernel: md: autorun ... Nov 1 19:08:47 milliways kernel: md: considering sdc1 ... Nov 1 19:08:47 milliways kernel: md: adding sdc1 ... Nov 1 19:08:47 milliways kernel: md: adding sdb1 ... Nov 1 19:08:47 milliways kernel: md: created md0 Nov 1 19:08:47 milliways kernel: md: bind<sdb1> Nov 1 19:08:47 milliways kernel: md: bind<sdc1> Nov 1 19:08:47 milliways kernel: md: running: <sdc1><sdb1> Nov 1 19:08:47 milliways kernel: bio: create slab <bio-1> at 1 Nov 1 19:08:47 milliways kernel: md/raid1:md0: active with 2 out of 2 mirrors Nov 1 19:08:47 milliways kernel: md0: detected capacity change from 0 to 1000202174464 Nov 1 19:08:47 milliways kernel: md: ... autorun DONE. Nov 1 19:08:47 milliways kernel: EXT3-fs: barriers not enabled Nov 1 19:08:47 milliways kernel: kjournald starting. Commit interval 5 seconds Nov 1 19:08:47 milliways kernel: EXT3-fs (sda5): mounted filesystem with writeback data mode Nov 1 19:08:47 milliways kernel: VFS: Mounted root (ext3 filesystem) readonly on device 8:5. [ ... ] Nov 1 19:08:53 milliways smartd[1785]: smartd 5.41 2011-06-09 r3365 [x86_64-linux-3.0.4] (local build) Nov 1 19:08:53 milliways smartd[1785]: Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Nov 1 19:08:53 milliways smartd[1785]: Opened configuration file /etc/smartd.conf Nov 1 19:08:53 milliways smartd[1785]: Configuration file /etc/smartd.conf parsed. Nov 1 19:08:53 milliways smartd[1785]: Device: /dev/sda, open() failed: No such device Nov 1 19:08:53 milliways smartd[1785]: Device: /dev/sdb, open() failed: No such device Nov 1 19:08:53 milliways smartd[1785]: Device: /dev/sdc, open() failed: No such device Nov 1 19:08:53 milliways smartd[1785]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting... -- das eine Mal als Tragödie, das andere Mal als Farce -- http://linuxfromscratch.org/mailman/listinfo/lfs-support FAQ: http://www.linuxfromscratch.org/lfs/faq.html Unsubscribe: See the above information page
