I wish you luck on this project. My shop is Un-Heated when I am not in the
shop. Its a very real pain in the winter. Due to this problem,I don't do a lot
in the shop form Nov-Mar.
Once you get a chance send us any photo's and questions you may have. Depending
on your type of wood working you plan to do, will influence the tools and parts
you will be looking for to add to your shop.
As for myself I started very rustic, and slowly worked towards more ornamental
turnings over the years.The Legacy is a very good tool, but its the User that
makes the art.
Best of luck on this...Keep in touch.
C.A.G.
On Monday, March 24, 2025 at 08:10:20 PM EDT, Dan Peterson
<danrp...@gmail.com> wrote:
Thank you everyone. I will finally take pictures tomorrow of all that came in
a box with the 1800. I'm sure it's missing a lot. Great idea CAG on the
lubrication. Life gets in the way of getting my garage space in shape. I am
having the local building official come over soon to tell me what I may need to
do so as to heat and cool the one car garage that will be my wood shop. I plan
on using ThermoSlab In-Floor heating cable to be the main heating source and
not yet sure on the best way to cool it yet. I am increasing the size of my
electrical panel from 60 amps to 200 amps. Increasing it is free from the
electrical utility however of course I will have to hire an electrician to put
in the new panel.My garage is only 11 x18 at most. I'll cut open the floor for
a rectangular hole for the 150' of heating cable. It requires a atleast 2" of
rigid foam and some rebar. I'm a plumber by day and a wanna be woodworker by
night and weekends. I sincerely thank all of you. Keep up the great work.
Talk soon.
On Wed, Mar 19, 2025 at 11:05 PM 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
Hey there everyone.
Dan I agree with Bill, If you can take some photo's of what you have, It might
make it easer to help you figure out what you now own.
Was there a motor drive unit with this machine? If Not, believe you me, that is
something you will want to have.
Did you get any router bit with your machine? Magnate bits are good bits for
the price. (https://www.magnate.net/SearchResults.asp?Cat=90 )
As far as getting you Legacy back into shape.
With a little steel wool and some penetration oil is all that you should need
for the Acme screw. as for the alum. rails Dyna Glide is the best product on
the market to keep those working as they should.
wishing the best of luck. I am very happy with you Dan.
Have a good night.
C.A.G.
On Wednesday, March 19, 2025 at 10:21:54 PM EDT, <bulke...@mmnet.com.au>
wrote:
That’s good Dan, if you wish lay all what you have out and take pics of it all
and post them on here and we can let you know what you have and what you need
to make your mill work at its optimum potential .when buying a mill its all the
extras that it has with it makes it a good buy
Bill
From: legacy-ornamental-mills@googlegroups.com
<legacy-ornamental-mills@googlegroups.com> On Behalf Of Dan Peterson
Sent: Thursday, 20 March 2025 12:19 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Finally, after about 30 years.
Hi Bill. I do have a box of things which includes some gears. I think the
original customer of the LOM used it twice since purchasing it some time ago. I
believe it was the most basic package. I'm a ways off from getting it in
running order.
On Tue, Mar 18, 2025, 10:53 PM 'Curt George' via Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> wrote:
It looks like you found a very nice machine! I am happy for you. ;-)
C.A.G.
On Tuesday, March 18, 2025 at 08:37:28 PM EDT, Dan Peterson
<danrp...@gmail.com> wrote:
---------- Forwarded message ---------
From: Dan Peterson <danrp...@gmail.com>
Date: Thu, Mar 13, 2025 at 8:14 AM
Subject: Finally, after about 30 years.
To: <danrp...@gmail.com>
Good morning, I drove from Glencoe, Mn to Sparta, Wisconsin last Wednesday to
buy this LOM 1800. The journey continues. Boy, Do I have A lot to learn. I'm
very grateful. I have to renovate my small garage before i can get this machine
running. Also the LOM may need some work to run effeciently.
Have a wonderful day.
Make it a great day! Dan Peterson
D R Peterson Inc - Master Plumber PM#647582
952-465-2926
--
Make it a great day! Dan Peterson
D R Peterson Inc - Master Plumber PM#647582
952-465-2926
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CACMd9CSC-pfNr1HMaLc6SE-3Gt9Ettg7MvQJJUUGLniSHaZWvA%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/2087664003.3138404.1742356375372%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CACMd9CRaKfX1HZPtbt7WtBjFq8URwNbP1oCO%3DGFsY4tZSJRVRg%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000201db993e%24d3374b40%2479a5e1c0%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/502898122.3378107.1742443518459%40mail.yahoo.com.
--
Make it a great day! Dan PetersonD R Peterson Inc - Master Plumber PM#647582
952-465-2926
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CACMd9CQERMmzKjvgfRK4mcwh6QJ6KeaSX47HDqH%3DFoOHkVFouA%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1074978679.775341.1742862523919%40mail.yahoo.com.
