On 2018-05-02 11:01, Linus Walleij wrote:
On Wed, May 2, 2018 at 12:18 AM, Linus Walleij
<linus.wall...@linaro.org> wrote:
On Sun, Apr 29, 2018 at 8:32 PM, Roman Yeryomin <ro...@advem.lv>
wrote:
Linus, could you test that branch on your device and see if network
is
working by default?
I've pulled in the branch and building it for D-Link DNS-313 right
now.
Will report back.
I found some initial snags and sent you a patch for it, mostly
some chicken-and-egg problem for harddisk boot and clumsy
attempt to patch the command line from my side that I replaced
with bootargs in the device tree.
It boots, mounts root and gets to prompt now.
I will submit the bootargs patches upstream.
There is some moaning in dmesg:
[ 10.071561] Btrfs loaded, crc32c=crc32c-generic
[ 10.105705] mbcache: exports duplicate symbol __mb_cache_entry_free
(owned by kernel)
[ 10.161586] jbd2: exports duplicate symbol jbd2__journal_restart
(owned by kernel)
Oh.. wait... I've missed that DNS-313 doesn't have any onboard flash and
boots from hdd!
Seems we need CONFIG_JBD2=y and CONFIG_FS_MBCACHE=y (along with ext4 and
other fs) back.
I guess you see this too? Related to the USB mess I guess, we can live
with it.
No, I don't have the same, Raidsonic (and other boards, afaik) have
onboard flash which can be used for system.
So hard drives can be used for pure storage, which is more convenient,
IMO.
Network does not come up either, I suspect it is because of missing the
Realtek PHY driver, so will investigate this further.
Could be... what does dmesg say about that? does it read any phy_id ?
Raidsonic has Marvell 88e1116 phy but works as generic phy just fine:
[ 5.731760] Generic PHY gpio-0:01: attached PHY driver [Generic PHY]
(mii_bus:phy_addr=gpio-0:01, irq=POLL)
[ 5.731781] phy_id=0x01410e11, phy_mode=rgmii
Regards,
Roman
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
