On 25-04-18 02:27, Christo Nedev wrote:
> From: Christo Nedev <christo.ne...@me.com>
>
> Signed-off-by: Christo Nedev <christo.ne...@me.com>
> ---
> target/linux/brcm2708/Makefile | 1 +
> target/linux/brcm2708/base-files/etc/board.d/02_network | 3 ++-
> .../base-files/lib/preinit/05_set_preinit_iface_brcm2708 | 1 +
> target/linux/brcm2708/bcm2709/config-4.9 | 1 +
> target/linux/brcm2708/bcm2710/config-4.9 | 1 +
> target/linux/brcm2708/image/Makefile | 12
> ++++++------
> 6 files changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile
> index 244513dfc6..528422eec2 100644
> --- a/target/linux/brcm2708/Makefile
> +++ b/target/linux/brcm2708/Makefile
> @@ -25,6 +25,7 @@ include $(INCLUDE_DIR)/target.mk
> DEFAULT_PACKAGES += \
> brcm2708-gpu-fw \
> kmod-usb-hid \
> + kmod-usb-net kmod-usb-net-rndis kmod-usb-net-cdc-ether \
Nitpicking, and I know the other lines don't have everything in
alphabetical order either, but I'd have done it like that.
> kmod-sound-core kmod-sound-arm-bcm2835 \
> kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
> brcmfmac-firmware-43430-sdio kmod-brcmfmac wpad-mini
> diff --git a/target/linux/brcm2708/base-files/etc/board.d/02_network
> b/target/linux/brcm2708/base-files/etc/board.d/02_network
> index a9c947b65a..de3ded31f6 100755
> --- a/target/linux/brcm2708/base-files/etc/board.d/02_network
> +++ b/target/linux/brcm2708/base-files/etc/board.d/02_network
> @@ -15,7 +15,8 @@ raspberrypi,model-b |\
> raspberrypi,model-b-plus |\
> raspberrypi,model-b-rev2 |\
> raspberrypi,2-model-b |\
> -raspberrypi,3-model-b)
> +raspberrypi,3-model-b) |\
> +raspberrypi,3-model-b-plus
> ucidef_set_interface_lan "eth0"
> ;;
>
> diff --git
> a/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
> b/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
> index 76eb5905e8..3a5c198fc6 100644
> ---
> a/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
> +++
> b/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
> @@ -8,6 +8,7 @@ set_preinit_iface() {
> case "$(board_name)" in
> raspberrypi,2-model-b |\
> raspberrypi,3-model-b |\
> + raspberrypi,3-model-b-plus |\
> raspberrypi,model-b |\
> raspberrypi,model-b-plus |\
> raspberrypi,model-b-rev2)
> diff --git a/target/linux/brcm2708/bcm2709/config-4.9
> b/target/linux/brcm2708/bcm2709/config-4.9
> index 71884a5fa1..38b97823bd 100644
> --- a/target/linux/brcm2708/bcm2709/config-4.9
> +++ b/target/linux/brcm2708/bcm2709/config-4.9
> @@ -400,6 +400,7 @@ CONFIG_USB_DWCOTG=y
> # CONFIG_USB_EHCI_HCD is not set
> CONFIG_USB_NET_DRIVERS=y
> CONFIG_USB_NET_SMSC95XX=y
> +CONFIG_USB_LAN78XX=y
Not ordered alphabetically. The rest of the file is.
> CONFIG_USB_STORAGE=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_UAS=y
> diff --git a/target/linux/brcm2708/bcm2710/config-4.9
> b/target/linux/brcm2708/bcm2710/config-4.9
> index d402f4b573..b7439ed47e 100644
> --- a/target/linux/brcm2708/bcm2710/config-4.9
> +++ b/target/linux/brcm2708/bcm2710/config-4.9
> @@ -418,6 +418,7 @@ CONFIG_USB_DWCOTG=y
> # CONFIG_USB_EHCI_HCD is not set
> CONFIG_USB_NET_DRIVERS=y
> CONFIG_USB_NET_SMSC95XX=y
> +CONFIG_USB_LAN78XX=y
Same.
> CONFIG_USB_STORAGE=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_UAS=y
> diff --git a/target/linux/brcm2708/image/Makefile
> b/target/linux/brcm2708/image/Makefile
> index 9ea9a07a9d..691212de9f 100644
> --- a/target/linux/brcm2708/image/Makefile
> +++ b/target/linux/brcm2708/image/Makefile
> @@ -64,9 +64,9 @@ ifeq ($(SUBTARGET),bcm2708)
> endif
>
> define Device/rpi-2
> - DEVICE_TITLE := Raspberry Pi 2B/3B/3CM
> - DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-cm3
> - SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm raspberrypi,2-model-b
> raspberrypi,3-model-b raspberrypi,compute-module-3
> + DEVICE_TITLE := Raspberry Pi 2B/3B/3B+/3CM
> + DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-3-b-plus
> bcm2710-rpi-cm3
> + SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm
> raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,3-model-b-plus
> raspberrypi,compute-module-3
> endef
> ifeq ($(SUBTARGET),bcm2709)
> TARGET_DEVICES += rpi-2
> @@ -74,9 +74,9 @@ endif
>
> define Device/rpi-3
> KERNEL_IMG := kernel8.img
> - DEVICE_TITLE := Raspberry Pi 3B (64 bit)
> - DEVICE_DTS := broadcom/bcm2710-rpi-3-b
> - SUPPORTED_DEVICES := rpi-3-b raspberrypi,3-model-b
> + DEVICE_TITLE := Raspberry Pi 3B/3B+
> + DEVICE_DTS := broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus
> + SUPPORTED_DEVICES := rpi-3-b rpi-3-b-plus raspberrypi,3-model-b
> raspberrypi,3-model-b-plus
> endef
> ifeq ($(SUBTARGET),bcm2710)
> TARGET_DEVICES += rpi-3
Please squash this with your previous patch, and use the correct prefix
in the commit message (brcm2708:)
Thanks,
Stijn
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
