On 01/05/2018 12:14 AM, Sandeep Sheriker Mallikarjun wrote: > 1. enabled DMA controller options > 2. Enabled CMA options > 3. enabled VFP options > 4. Add Atmel SD/MMC Driver > > Signed-off-by: Sandeep Sheriker Mallikarjun > <sandeepsheriker.mallikar...@microchip.com> > --- > target/linux/at91/sama5/config-default | 43 > ++++++++++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/target/linux/at91/sama5/config-default > b/target/linux/at91/sama5/config-default > index 00d4cf9..736f76b 100644 > --- a/target/linux/at91/sama5/config-default > +++ b/target/linux/at91/sama5/config-default > @@ -34,6 +34,7 @@ CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_IO_ACCESSORS=y > CONFIG_MMC_SDHCI_OF_AT91=y > CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_ATMELMCI=y > CONFIG_OUTER_CACHE=y > CONFIG_OUTER_CACHE_SYNC=y > CONFIG_PINCTRL_AT91PIO4=y > @@ -48,5 +49,47 @@ CONFIG_SOC_SAMA5D3=y > CONFIG_SOC_SAMA5D4=y > CONFIG_SOC_SAM_V7=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > +CONFIG_DMA_SHARED_BUFFER=y > +CONFIG_DMA_CMA=y > +CONFIG_SCSI_DMA=y > +CONFIG_VIDEOBUF2_DMA_CONTIG=y > +CONFIG_SND_DMAENGINE_PCM=y > +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y > +CONFIG_SND_ATMEL_SOC_DMA=y > +CONFIG_SND_ATMEL_SOC_SSC_DMA=y > +CONFIG_DMA_ENGINE=y > +CONFIG_DMA_OF=y > +CONFIG_AT_HDMAC=y > +CONFIG_AT_XDMAC=y > +CONFIG_HAS_DMA=y > +CONFIG_CMA=y > +# CONFIG_CMA_DEBUG is not set > +CONFIG_CMA_DEBUGFS=y > +CONFIG_CMA_AREAS=7 > +CONFIG_DMA_CMA=y > +# > +# Default contiguous memory area size: > +# > +CONFIG_CMA_SIZE_MBYTES=16 > +CONFIG_CMA_SIZE_SEL_MBYTES=y > +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set > +# CONFIG_CMA_SIZE_SEL_MIN is not set > +# CONFIG_CMA_SIZE_SEL_MAX is not set > +CONFIG_CMA_ALIGNMENT=8 > + > +CONFIG_BCMA_POSSIBLE=y > +# CONFIG_BCMA is not set > +CONFIG_DRM_GEM_CMA_HELPER=y > +CONFIG_DRM_KMS_CMA_HELPER=y > +ONFIG_DST_CACHE=y > +CONFIG_DCACHE_WORD_ACCESS=y > +# > +# At least one emulation must be selected > +# > +CONFIG_VFP=y > +CONFIG_VFPv3=y > +CONFIG_NEON=y > +CONFIG_KERNEL_MODE_NEON=y > + > # CONFIG_SWP_EMULATE is not set > # CONFIG_THUMB2_KERNEL is not set >
Please refresh this with "make kernel_oldconfig CONFIG_TARGET=subtarget" This should order the configuration correctly and remove unneeded parts. Hauke _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
