On 2017-11-30 04:53, Nicholas Smith wrote:
Here is the VID:PID of the MC7430, if it helps.
Bus 001 Device 002: ID 1199:9071 Sierra Wireless, Inc.
On 30 Nov 2017, at 1:49 pm, Nicholas Smith <smith.nicholas...@gmail.com> wrote:
Hi Koen,
I would like to report that it is attempting, but it is unable to change
/sys/class/wwan0/qmi/raw_ip to a “Y” on it’s own. I have to bring the
interface down myself, set raw_ip to Y, then bring it back up. Manual, but it
works every time.
[ 40.455550] qmi_wwan 1-2:1.8 wwan0: Cannot change a running device
Here’s what I do to work around:
In LuCI go to wwan0 and stop the interface.
echo “Y” > /sys/class/wwan0/qmi/raw_ip
In LuCI go to wwan0 and connect the interface.
<snip>
Hi Nicholas,
Thanks for your time in testing this.
Just to be sure:
Can you confirm you've used the latest master and applied my patch
before seeing this error?
I'm not able to simulate your error here currently, and the script
manages to adapt this flag on each run.
Besides the error you notice, is your modem fully working now providing
a working uplink?
Thanks again,
Koen
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
