Signed-off-by: Koen Vandeputte <koen.vandepu...@ncentric.com>
---
Verified using online shell checker
package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 079c229..9c953ea 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -111,7 +111,7 @@ proto_qmi_setup() {
echo "Starting network $interface"
- pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+ pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
[ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ]
|| pdptype="ip"
if [ "$pdptype" = "ip" ]; then
@@ -122,7 +122,7 @@ proto_qmi_setup() {
fi
[ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
- cid_4=`uqmi -s -d "$device" --get-client-id wds`
+ cid_4=$(uqmi -s -d "$device" --get-client-id wds)
[ $? -ne 0 ] && {
echo "Unable to obtain client ID"
proto_notify_error "$interface" NO_CID
@@ -136,14 +136,14 @@ proto_qmi_setup() {
--stop-network 0xffffffff \
--autoconnect > /dev/null
- pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+ pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
--start-network \
${apn:+--apn $apn} \
${profile:+--profile $profile} \
${auth:+--auth-type $auth} \
${username:+--username $username} \
${password:+--password $password} \
- ${autoconnect:+--autoconnect}`
+ ${autoconnect:+--autoconnect})
[ $? -ne 0 ] && {
echo "Unable to connect IPv4"
uqmi -s -d "$device" --set-client-id wds,"$cid_4"
--release-client-id wds
@@ -153,7 +153,7 @@ proto_qmi_setup() {
}
[ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
- cid_6=`uqmi -s -d "$device" --get-client-id wds`
+ cid_6=$(uqmi -s -d "$device" --get-client-id wds)
[ $? -ne 0 ] && {
echo "Unable to obtain client ID"
proto_notify_error "$interface" NO_CID
@@ -167,14 +167,14 @@ proto_qmi_setup() {
--stop-network 0xffffffff \
--autoconnect > /dev/null
- pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+ pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
--start-network \
${apn:+--apn $apn} \
${profile:+--profile $profile} \
${auth:+--auth-type $auth} \
${username:+--username $username} \
${password:+--password $password} \
- ${autoconnect:+--autoconnect}`
+ ${autoconnect:+--autoconnect})
[ $? -ne 0 ] && {
echo "Unable to connect IPv6"
uqmi -s -d "$device" --set-client-id wds,"$cid_6"
--release-client-id wds
--
2.7.4
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
