- add partitions
- enable wifi and ethernet
- set max cpu speed to 710MHz
- set memory size to 256MB
- add image generation
- extract pre-cal data from ART partition
Wirespeed NAT can be achieved with spreading rx interrupts over different cores.
Wifi needs love -- too slow. Could be that latest ath10k helps, didn't test yet.
Signed-off-by: Roman Yeryomin <ro...@advem.lv>
---
.../etc/hotplug.d/firmware/11-ath10k-caldata | 6 ++
target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 +
target/linux/ipq806x/image/Makefile | 18 ++++-
...s-ipq4019-ap.dk01.1-add-256MB-memory-node.patch | 14 ++++
...2-dts-ipq4019-ap.dk01.1-fix-max-cpu-speed.patch | 15 ++++
...4-03-dts-ipq4019-ap.dk01.1-add-partitions.patch | 72 ++++++++++++++++++
...pq4019-ap.dk01.1-enable-wifi-and-ethernet.patch | 87 ++++++++++++++++++++++
7 files changed, 214 insertions(+), 1 deletion(-)
create mode 100644
target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap.dk01.1-add-256MB-memory-node.patch
create mode 100644
target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap.dk01.1-fix-max-cpu-speed.patch
create mode 100644
target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap.dk01.1-add-partitions.patch
create mode 100644
target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap.dk01.1-enable-wifi-and-ethernet.patch
diff --git
a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 39757eb..271667f 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -50,6 +50,9 @@ case "$FIRMWARE" in
fritz4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o
/lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ ap-dk01.1-c1)
+ ath10kcal_extract "ART" 4096 12064
+ ;;
esac
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
@@ -57,6 +60,9 @@ case "$FIRMWARE" in
fritz4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o
/lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ ap-dk01.1-c1)
+ ath10kcal_extract "ART" 20480 12064
+ ;;
esac
;;
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index e8ff7ea..940c7ef 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -14,6 +14,9 @@ ipq806x_board_detect() {
machine=$(cat /proc/device-tree/model)
case "$machine" in
+ *"AP-DK01.1-C1")
+ name="ap-dk01.1-c1"
+ ;;
*"AP148")
name="ap148"
;;
diff --git a/target/linux/ipq806x/image/Makefile
b/target/linux/ipq806x/image/Makefile
index 3a76c7f..60b3a71 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -264,7 +264,23 @@ define Device/AP-DK04.1-C1
DEVICE_TITLE := QCA AP-DK04.1-C1
endef
+define Device/AP-DK01.1-C1
+ PROFILES += $$(DEVICE_NAME)
+ DEVICE_TITLE := QCA AP-DK01.1-C1
+ BOARD_NAME := ap-dk01.1-c1
+ DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+ KERNEL_LOADADDR := 0x80208000
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 26624k
+ FILESYSTEMS := squashfs
+ $(call Device/FitImage)
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} |
append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca4019
+endef
+
TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
- R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
+ R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1 AP-DK01.1-C1
$(eval $(call BuildImage))
diff --git
a/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap.dk01.1-add-256MB-memory-node.patch
b/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap.dk01.1-add-256MB-memory-node.patch
new file mode 100644
index 0000000..8a80979
--- /dev/null
+++
b/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap.dk01.1-add-256MB-memory-node.patch
@@ -0,0 +1,14 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -20,6 +20,11 @@
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+ compatible = "qcom,ipq4019";
+
++ memory {
++ device_type = "memory";
++ reg = <0x80000000 0x10000000>;
++ };
++
+ clocks {
+ xo: xo {
+ compatible = "fixed-clock";
diff --git
a/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap.dk01.1-fix-max-cpu-speed.patch
b/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap.dk01.1-fix-max-cpu-speed.patch
new file mode 100644
index 0000000..e9540f4
--- /dev/null
+++
b/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap.dk01.1-fix-max-cpu-speed.patch
@@ -0,0 +1,15 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -135,3 +135,12 @@
+ };
+ };
+ };
++
++&cpu0_opp_table {
++ /delete-node/ opp@666000000;
++
++ opp@710000000 {
++ opp-hz = /bits/ 64 <710000000>;
++ clock-latency-ns = <256000>;
++ };
++};
diff --git
a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap.dk01.1-add-partitions.patch
b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap.dk01.1-add-partitions.patch
new file mode 100644
index 0000000..a7861cd
--- /dev/null
+++
b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap.dk01.1-add-partitions.patch
@@ -0,0 +1,72 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -93,6 +93,69 @@
+ reg = <0>;
+ compatible = "mx25l25635e";
+ spi-max-frequency = <24000000>;
++
++ SBL1@0 {
++ label = "SBL1";
++ reg = <0x0 0x40000>;
++ read-only;
++ };
++
++ MIBIB@40000 {
++ label = "MIBIB";
++ reg = <0x40000 0x20000>;
++ read-only;
++ };
++
++ QSEE@60000 {
++ label = "QSEE";
++ reg = <0x60000 0x60000>;
++ read-only;
++ };
++
++ CDT@c0000 {
++ label = "CDT";
++ reg = <0xc0000 0x10000>;
++ read-only;
++ };
++
++ DDRPARAMS@d0000 {
++ label = "DDRPARAMS";
++ reg = <0xd0000 0x10000>;
++ read-only;
++ };
++
++ APPSBLENV@e0000 {
++ label = "APPSBLENV";
++ reg = <0xe0000 0x10000>;
++ read-only;
++ };
++
++ APPSBL@f0000 {
++ label = "APPSBL";
++ reg = <0xf0000 0x80000>;
++ read-only;
++ };
++
++ ART@170000 {
++ label = "ART";
++ reg = <0x170000 0x10000>;
++ read-only;
++ };
++
++ kernel@180000 {
++ label = "kernel";
++ reg = <0x180000 0x400000>;
++ };
++
++ rootfs@580000 {
++ label = "rootfs";
++ reg = <0x580000 0x1600000>;
++ };
++
++ firmware@180000 {
++ label = "firmware";
++ reg = <0x180000 0x1a00000>;
++ };
+ };
+ };
+
diff --git
a/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap.dk01.1-enable-wifi-and-ethernet.patch
b/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap.dk01.1-enable-wifi-and-ethernet.patch
new file mode 100644
index 0000000..cc90475
--- /dev/null
+++
b/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap.dk01.1-enable-wifi-and-ethernet.patch
@@ -0,0 +1,87 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -15,6 +15,7 @@
+ */
+
+ #include "qcom-ipq4019.dtsi"
++#include <dt-bindings/soc/qcom,tcsr.h>
+
+ / {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+@@ -25,6 +26,27 @@
+ reg = <0x80000000 0x10000000>;
+ };
+
++ reserved-memory {
++ #address-cells = <0x1>;
++ #size-cells = <0x1>;
++ ranges;
++
++ rsvd1@87000000 {
++ reg = <0x87000000 0x0500000>;
++ no-map;
++ };
++
++ wifi_dump@87500000 {
++ reg = <0x87500000 0x600000>;
++ no-map;
++ };
++
++ rsvd2@87B00000 {
++ reg = <0x87b00000 0x500000>;
++ no-map;
++ };
++ };
++
+ clocks {
+ xo: xo {
+ compatible = "fixed-clock";
+@@ -196,6 +218,48 @@
+ usb2: usb2@60f8800 {
+ status = "ok";
+ };
++
++ wifi@a000000 {
++ status = "okay";
++ };
++
++ wifi@a800000 {
++ status = "okay";
++ };
++
++ ess-switch@c000000 {
++ status = "okay";
++ };
++
++ ess-psgmii@98000 {
++ status = "okay";
++ };
++
++ edma@c080000 {
++ status = "okay";
++ };
++
++ mdio@90000 {
++ status = "okay";
++ };
++
++ ess_tcsr@1953000 {
++ compatible = "qcom,tcsr";
++ reg = <0x1953000 0x1000>;
++ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
++ };
++
++ tcsr@1949000 {
++ compatible = "qcom,tcsr";
++ reg = <0x1949000 0x100>;
++ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
++ };
++
++ tcsr@1957000 {
++ compatible = "qcom,tcsr";
++ reg = <0x1957000 0x100>;
++ qcom,wifi_noc_memtype_m0_m2 =
<TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
++ };
+ };
+ };
+
--
2.7.4
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
