This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP).
Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G.
Signed-off-by: João Chaínho <joaochai...@gmail.com>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
b/target/linux/ar71xx/base-files/etc/board.d/02_network
index d838352..667819e 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -149,7 +149,6 @@ ar71xx_setup_interfaces()
pb42|\
pb44|\
rb-951ui-2hnd|\
- rb-951ui-2nd|\
rb-952ui-5ac2nd|\
routerstation|\
tl-wr710n|\
@@ -161,7 +160,8 @@ ar71xx_setup_interfaces()
;;
rb-750-r2|\
rb-750p-pbr2|\
- rb-750up-r2)
+ rb-750up-r2|\
+ rb-951ui-2nd)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
@@ -410,9 +410,9 @@ ar71xx_setup_interfaces()
rb-493g)
ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2"
ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+ "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
ucidef_add_switch "switch1" \
- "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+ "0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
;;
tellstick-znet-lite)
ucidef_set_interface_wan "eth0"
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
