On 10/11/2017 05:57 PM, e9hack wrote:
> Hi,
> 
> I've trouble with this commit:
> 
> author                Hauke Mehrtens <ha...@hauke-m.de>       
>               Tue, 22 Aug 2017 21:59:48 +0000 (23:59 +0200)
> committer     Hauke Mehrtens <ha...@hauke-m.de>       
>               Sun, 1 Oct 2017 10:49:11 +0000 (12:49 +0200)
> commit                a8f63a0717f553e0a1b37ee9212fc4cb2a801426
> mac80211: update to backports-4.14-rc2
> 
> Hostapd isn't able to initialize both wlan interfaces on my wdr3600 router. 
> If I try to start hostapd manually, I get
> the following output:
> 
> root@WLAN:~# /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -dd 
> /var/run/hostapd-phy0.conf
> Configuration file: /var/run/hostapd-phy0.conf
> wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
> wlan0: interface state COUNTRY_UPDATE->HT_SCAN
> 20/40 MHz operation not permitted on channel pri=9 sec=5 based on overlapping 
> BSSes
> Using interface wlan0 with hwaddr 00:11:22:33:44:55 and ssid "WLAN"
> Interface initialization failed
> wlan0: interface state HT_SCAN->DISABLED
> wlan0: AP-DISABLED
> wlan0: interface state DISABLED->DISABLED
> wlan0-4: AP-DISABLED
> wlan0-4: CTRL-EVENT-TERMINATING
> hostapd_free_hapd_data: Interface wlan0-4 wasn't started
> wlan0-3: AP-DISABLED
> wlan0-3: CTRL-EVENT-TERMINATING
> hostapd_free_hapd_data: Interface wlan0-3 wasn't started
> wlan0-2: AP-DISABLED
> wlan0-2: CTRL-EVENT-TERMINATING
> hostapd_free_hapd_data: Interface wlan0-2 wasn't started
> wlan0-1: AP-DISABLED
> wlan0-1: CTRL-EVENT-TERMINATING
> hostapd_free_hapd_data: Interface wlan0-1 wasn't started
> wlan0: AP-DISABLED
> wlan0: CTRL-EVENT-TERMINATING
> hostapd_free_hapd_data: Interface wlan0 wasn't started
> nl80211: deinit ifname=wlan0 disabled_11b_rates=0
> ELOOP: remaining socket: sock=19 eloop_data=0x77473c70 user_data=0 
> handler=0x42fc94
> 
> The router uses the ath9k driver. I'm using my own hostapd build with 
> internal radius support compiled in. I've a second
> router TP-LINK Archer C7 with same core family but ath10k instead of ath9k. 
> With this router, I don't have any problems.
> 
> Regards,
> Hartmut
> 

Hi,

I tested the new backports version with ath9k locally and did not saw
this problem with my device.

Could you activate more debugging in hostapd by changing
CONFIG_WPA_MSG_MIN_PRIORITY to 2 please.

In addition could you post your wireless configuration, with your keys
removed also please and try the normal full hostapd version if you are
able to reproduce it there too.

Hauke

_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev

Reply via email to