Hi guys, I'm using openwrt / lede devices for at least 5 years but never actively submitted any line of code or something. But i think the time has come ;)
I hope this is the right channel for this: I added below lines to /etc/dnsmasq.conf: # inspect the vendor class string and match the text to set the tag dhcp-vendorclass=BIOS,PXEClient:Arch:00000 dhcp-vendorclass=UEFI32,PXEClient:Arch:00006 dhcp-vendorclass=UEFI,PXEClient:Arch:00007 dhcp-vendorclass=UEFI64,PXEClient:Arch:00009 # Set the boot file name based on the matching tag from the vendor class (above) dhcp-boot=net:UEFI32,i386-efi/ipxe.efi,tftpboot-server,192.168.30.254 dhcp-boot=net:UEFI,ipxe.efi,tftpboot-server,192.168.30.254 dhcp-boot=net:UEFI64,ipxe.efi,tftpboot-server,192.168.30.254 And the below lines to /etc/config/dhcp: config boot linux option filename 'pxelinux.0' option serveraddress '192.168.30.254' option servername 'tftpboot-server' the auto generated config file /var/etc/dnsmasq.conf.cfg02411c will only contain this line: dhcp-boot=pxelinux.0,tftpboot-server,192.168.30.254 I'm a bit confused as i thought that the above dhcp-boot=net:UEFI* lines should be available in the generated config which is indeed not the case. In /etc/init.d/dnsmasq I found in line 843: append_parm "$cfg" "dhcp_boot" "--dhcp-boot" as for example the pxe_service is scripted as a config_list_foreach: config_list_foreach "$cfg" "pxe_service" append_pxe_service below the version information and so on: cat /etc/openwrt_releaseappend_parm "$cfg" "dhcp_boot" "--dhcp-boot" DISTRIB_ID='LEDE' DISTRIB_RELEASE='SNAPSHOT' DISTRIB_REVISION='r4407-a3332f2' DISTRIB_CODENAME='reboot' DISTRIB_TARGET='ar71xx/generic' DISTRIB_ARCH='mips_24kc' DISTRIB_DESCRIPTION='LEDE Reboot SNAPSHOT r4407-a3332f2' DISTRIB_TAINTS='no-all' uname -mrvo 4.4.71 #0 Wed Jun 14 15:47:08 UTC 2017 mips GNU/Linux dnsmasq -v Dnsmasq version 2.77 Copyright (c) 2000-2016 Simon Kelley Compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no- DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop- detect inotify This software comes with ABSOLUTELY NO WARRANTY. Dnsmasq is free software, and you are welcome to redistribute it under the terms of the GNU General Public License, version 2 or 3. Don't hesistate to contact me if you need more information and indeed i'm willing to investgate this. Best regards, Uwe _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
