On 07/06/17 01:36, Sven Roederer wrote:
John,
just checked with master build f500799 as initrd-kernel. Looks fine as
I can see from bootlog.
Anything special to test?
[ 1.710000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 1.720000] Allocate 16 byte aligned buffer: 80592f90
[ 1.730000] Enable NFI Clock
[ 1.740000] # MTK NAND # : Use HW ECC
[ 1.740000] Device found in MTK table, ID: 1da, EXT_ID: 909546
[ 1.760000] Support this Device in MTK table! 1da
[ 1.770000] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 1.780000] nand: AMD/Spansion NAND 256MiB 3,3V 8-bit
[ 1.790000] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB
size: 128
[ 1.800000] [NAND]select ecc bit:12, sparesize :112 spare_per_sector=28
[ 1.820000] Scanning device for bad blocks
[ 2.520000] 6 ofpart partitions found on MTD device MT7621-NAND
[ 2.530000] Creating 6 MTD partitions on "MT7621-NAND":
[ 2.540000] 0x000000000000-0x000000080000 : "u-boot"
[ 2.550000] 0x000000080000-0x0000000e0000 : "u-boot-env"
[ 2.560000] 0x0000000e0000-0x000000140000 : "factory"
[ 2.570000] 0x000000140000-0x000000440000 : "kernel1"
[ 2.580000] 0x000000440000-0x000000740000 : "kernel2"
[ 2.590000] 0x000000740000-0x00000ff00000 : "ubi"
[ 2.610000] [mtk_nand] probe successfully!
[ 2.610000] Signature matched and data read!
[ 2.620000] load_fact_bbt success 2047
Sven
Thanks for testing, i just wanted a 2nd test result for the nand support
on v4.9. i think i'll just switch ramips to v4.9 and hope all goes well.
John
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
