On 16 May 2017 at 13:33, John Crispin <j...@phrozen.org> wrote:
>
>
> On 09/05/17 11:17, Roman Yeryomin wrote:
>>
>> Signed-off-by: Roman Yeryomin <ro...@advem.lv>
>> ---
>> .../linux/ipq806x/base-files/etc/board.d/01_leds | 4 +-
>> .../ipq806x/base-files/etc/board.d/02_network | 4 +-
>> target/linux/ipq806x/base-files/etc/diag.sh | 13 +++-
>> .../etc/hotplug.d/firmware/11-ath10k-caldata | 3 +-
>> .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 +-
>> .../ipq806x/base-files/etc/init.d/linksys_recovery | 3 +-
>> .../linux/ipq806x/base-files/lib/board_detect.sh | 60 ++++++++++++++++
>> target/linux/ipq806x/base-files/lib/ipq806x.sh | 82
>> ----------------------
>> .../lib/preinit/03_preinit_do_ipq806x.sh | 12 ----
>> .../ipq806x/base-files/lib/upgrade/platform.sh | 8 +--
>> 10 files changed, 84 insertions(+), 109 deletions(-)
>> create mode 100644 target/linux/ipq806x/base-files/lib/board_detect.sh
>> delete mode 100644 target/linux/ipq806x/base-files/lib/ipq806x.sh
>> delete mode 100644
>> target/linux/ipq806x/base-files/lib/preinit/03_preinit_do_ipq806x.sh
>>
>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>> b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>> index 1371767..85c94f0 100755
>> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
>> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
>> @@ -4,11 +4,11 @@
>> #
>> . /lib/functions/uci-defaults.sh
>> -. /lib/ipq806x.sh
>> +. /lib/functions/board.sh
>> board_config_update
>> -board=$(ipq806x_board_name)
>> +board=$(board_name)
>> case "$board" in
>> c2600)
>> diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
>> b/target/linux/ipq806x/base-files/etc/board.d/02_network
>> index bd81a1e..fdcc7e7 100755
>> --- a/target/linux/ipq806x/base-files/etc/board.d/02_network
>> +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
>> @@ -5,12 +5,12 @@
>> #
>> . /lib/functions/uci-defaults.sh
>> -. /lib/ipq806x.sh
>> +. /lib/functions/board.sh
>> . /lib/functions/system.sh
>> board_config_update
>> -board=$(ipq806x_board_name)
>> +board=$(board_name)
>> case "$board" in
>> ap148 |\
>> diff --git a/target/linux/ipq806x/base-files/etc/diag.sh
>> b/target/linux/ipq806x/base-files/etc/diag.sh
>> index 7c9a9d0..0d3c6b0 100755
>> --- a/target/linux/ipq806x/base-files/etc/diag.sh
>> +++ b/target/linux/ipq806x/base-files/etc/diag.sh
>> @@ -2,7 +2,18 @@
>> # Copyright (C) 2016 Henryk Heisig hy...@o2.pl
>> . /lib/functions/leds.sh
>> -. /lib/ipq806x.sh
>> +
>> +ipq806x_get_dt_led() {
>> + local label
>> + local ledpath
>> + local basepath="/sys/firmware/devicetree/base"
>> + local nodepath="$basepath/aliases/led-$1"
>> +
>> + [ -f "$nodepath" ] && ledpath=$(cat "$nodepath")
>> + [ -n "$ledpath" ] && label=$(cat "$basepath$ledpath/label")
>> +
>> + echo "$label"
>> +}
>> boot="$(ipq806x_get_dt_led boot)"
>> failsafe="$(ipq806x_get_dt_led failsafe)"
>> diff --git
>> a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> index 6526212..9d9e21d 100644
>> ---
>> a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> +++
>> b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
>> @@ -38,11 +38,10 @@ ath10kcal_patch_mac() {
>> [ -e /lib/firmware/$FIRMWARE ] && exit 0
>> -. /lib/ipq806x.sh
>> . /lib/functions.sh
>> . /lib/functions/system.sh
>> -board=$(ipq806x_board_name)
>> +board=$(board_name)
>> case "$FIRMWARE" in
>> diff --git
>> a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>> b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>> index 2ea408d..c24a18f 100644
>> ---
>> a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>> +++
>> b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>> @@ -6,10 +6,10 @@ PHYNBR=${DEVPATH##*/phy}
>> [ -n $PHYNBR ] || exit 0
>> -. /lib/ipq806x.sh
>> +. /lib/functions/board.sh
>> . /lib/functions/system.sh
>> -board=$(ipq806x_board_name)
>> +board=$(board_name)
>> case "$board" in
>> c2600)
>> diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
>> b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
>> index b9ea004..4d94f1f 100755
>> --- a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
>> +++ b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
>> @@ -4,9 +4,8 @@
>> START=97
>> boot() {
>> . /lib/functions.sh
>> -. /lib/ipq806x.sh
>> -case $(ipq806x_board_name) in
>> +case $(board_name) in
>> ea8500)
>> # make sure auto_recovery in uboot is always on
>> AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
>> diff --git a/target/linux/ipq806x/base-files/lib/board_detect.sh
>> b/target/linux/ipq806x/base-files/lib/board_detect.sh
>> new file mode 100644
>> index 0000000..eb4100e
>> --- /dev/null
>> +++ b/target/linux/ipq806x/base-files/lib/board_detect.sh
>> @@ -0,0 +1,60 @@
>> +#!/bin/sh
>> +#
>> +# Copyright (c) 2014-2017 The Linux Foundation. All rights reserved.
>> +# Copyright (C) 2011-2017 OpenWrt.org
>> +#
>> +
>> +board_detect() {
>> + local IPQ806X_BOARD_NAME=
>> + local IPQ806X_MODEL=
>> + local machine
>> + local name
>> +
>> + machine=$(cat /proc/device-tree/model)
>> +
>
> Hi Roman,
>
> i think the generic code should be using the compat string from devicetree,
> allowing us to drop the case statements.
>
exactly this one is not generic, it's ip806x code.
I agree that compatible string from dts would make a lot of sense, but
IMO it should be done as different patch series.
And btw generic code from base-files already uses that (in this
patch). So maybe this code is not even needed at all. But again, I see
it as different patch series, because it would most likely touch dts
files and this series only changes infrastructure.
>> + case "$machine" in
>> + *"AP148")
>> + name="ap148"
>> + ;;
>> + *"4040")
>> + name="fritz4040"
>> + ;;
>> + *"C2600")
>> + name="c2600"
>> + ;;
>> + *"D7800")
>> + name="d7800"
>> + ;;
>> + *"DB149")
>> + name="db149"
>> + ;;
>> + *"NBG6817")
>> + name="nbg6817"
>> + ;;
>> + *"R7500")
>> + name="r7500"
>> + ;;
>> + *"R7500v2")
>> + name="r7500v2"
>> + ;;
>> + *"Linksys EA8500"*)
>> + name="ea8500"
>> + ;;
>> + *"R7800")
>> + name="r7800"
>> + ;;
>> + *"VR2600v")
>> + name="vr2600v"
>> + ;;
>> + esac
>> +
>> + [ -z "$name" ] && name="unknown"
>> +
>> + [ -z "$IPQ806X_BOARD_NAME" ] && IPQ806X_BOARD_NAME="$name"
>> + [ -z "$IPQ806X_MODEL" ] && IPQ806X_MODEL="$machine"
>> +
>> + [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
>> +
>> + echo "$IPQ806X_BOARD_NAME" > /tmp/sysinfo/board_name
>> + echo "$IPQ806X_MODEL" > /tmp/sysinfo/model
>> +}
>> diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>> b/target/linux/ipq806x/base-files/lib/ipq806x.sh
>> deleted file mode 100644
>> index 348a3a8..0000000
>> --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
>> +++ /dev/null
>> @@ -1,82 +0,0 @@
>> -#!/bin/sh
>> -#
>> -# Copyright (c) 2014 The Linux Foundation. All rights reserved.
>> -# Copyright (C) 2011 OpenWrt.org
>> -#
>> -
>> -IPQ806X_BOARD_NAME=
>> -IPQ806X_MODEL=
>> -
>> -ipq806x_board_detect() {
>> - local machine
>> - local name
>> -
>> - machine=$(cat /proc/device-tree/model)
>> -
>> - case "$machine" in
>> - *"AP148")
>> - name="ap148"
>> - ;;
>> - *"4040")
>> - name="fritz4040"
>> - ;;
>> - *"C2600")
>> - name="c2600"
>> - ;;
>> - *"D7800")
>> - name="d7800"
>> - ;;
>> - *"DB149")
>> - name="db149"
>> - ;;
>> - *"NBG6817")
>> - name="nbg6817"
>> - ;;
>> - *"R7500")
>> - name="r7500"
>> - ;;
>> - *"R7500v2")
>> - name="r7500v2"
>> - ;;
>> - *"Linksys EA8500"*)
>> - name="ea8500"
>> - ;;
>> - *"R7800")
>> - name="r7800"
>> - ;;
>> - *"VR2600v")
>> - name="vr2600v"
>> - ;;
>> - esac
>> -
>> - [ -z "$name" ] && name="unknown"
>> -
>> - [ -z "$IPQ806X_BOARD_NAME" ] && IPQ806X_BOARD_NAME="$name"
>> - [ -z "$IPQ806X_MODEL" ] && IPQ806X_MODEL="$machine"
>> -
>> - [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
>> -
>> - echo "$IPQ806X_BOARD_NAME" > /tmp/sysinfo/board_name
>> - echo "$IPQ806X_MODEL" > /tmp/sysinfo/model
>> -}
>> -
>> -ipq806x_board_name() {
>> - local name
>> -
>> - [ -f /tmp/sysinfo/board_name ] && name=$(cat
>> /tmp/sysinfo/board_name)
>> - [ -z "$name" ] && name="unknown"
>> -
>> - echo "$name"
>> -}
>> -
>> -ipq806x_get_dt_led() {
>> - local label
>> - local ledpath
>> - local basepath="/sys/firmware/devicetree/base"
>> - local nodepath="$basepath/aliases/led-$1"
>> -
>> - [ -f "$nodepath" ] && ledpath=$(cat "$nodepath")
>> - [ -n "$ledpath" ] && label=$(cat "$basepath$ledpath/label")
>> -
>> - echo "$label"
>> -}
>> diff --git
>> a/target/linux/ipq806x/base-files/lib/preinit/03_preinit_do_ipq806x.sh
>> b/target/linux/ipq806x/base-files/lib/preinit/03_preinit_do_ipq806x.sh
>> deleted file mode 100644
>> index 785f1eb..0000000
>> --- a/target/linux/ipq806x/base-files/lib/preinit/03_preinit_do_ipq806x.sh
>> +++ /dev/null
>> @@ -1,12 +0,0 @@
>> -#!/bin/sh
>> -#
>> -# Copyright (c) 2014 The Linux Foundation. All rights reserved.
>> -#
>> -
>> -do_ipq806x() {
>> - . /lib/ipq806x.sh
>> -
>> - ipq806x_board_detect
>> -}
>> -
>> -boot_hook_add preinit_main do_ipq806x
>> diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> index 8970285..1e4a006 100644
>> --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
>> @@ -1,4 +1,4 @@
>> -. /lib/ipq806x.sh
>> +. /lib/functions/board.sh
>> PART_NAME=firmware
>> REQUIRE_IMAGE_METADATA=1
>> @@ -8,7 +8,7 @@ platform_check_image() {
>> }
>> platform_pre_upgrade() {
>> - local board=$(ipq806x_board_name)
>> + local board=$(board_name)
>> case "$board" in
>> ap148 |\
>> @@ -26,7 +26,7 @@ platform_pre_upgrade() {
>> }
>> platform_do_upgrade() {
>> - local board=$(ipq806x_board_name)
>> + local board=$(board_name)
>> case "$board" in
>> c2600)
>> @@ -49,7 +49,7 @@ platform_do_upgrade() {
>> }
>> platform_nand_pre_upgrade() {
>> - local board=$(ipq806x_board_name)
>> + local board=$(board_name)
>> case "$board" in
>> nbg6817)
>
>
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
