I started to create a separate board for teh Ubiquiti EdgeRouterX SPF.
This device is very similar to the EdgeRouterX, but includes:
- an SFP-port
- 5 passive-PoE LAN-ports (24V)
The EdgeRouterX had only a PoE-passtrought-port
I basically made a copy of the ubnt-erx as ubnt-erx-sfp (patch 1).
I defined the gpios via board.d/03-gpio-switch for both boards (patch 2)
I just added a modified DTS of erx as erx-sfp (patch 3).
I have a board running with this an not seen any problems by now.
When I've got a spare SFP-board I'll try to separate the dts into
- a common file for erx and erx-sfp
- a dts for erx only settings, which includes the common dts
- a dts for erx-sfp settings, which includes the common dts
Please comment on style and things that should be changed for final patch
Thanks Sven
Sven Roederer (3):
ramips-mt7621: add support for Ubiquiti EdgeRouter X-SFP
(UBNT-ERX-SFP)
ramips-mt7621: add GPIO-config for Ubiquiti-EdgeRouterX(-SFP)
ramips-mt7621: add dts for UBNT-ERX-SFP
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
.../ramips/base-files/etc/board.d/03_gpio_switches | 28 +++++
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 9 +-
target/linux/ramips/dts/UBNT-ERX-SFP.dts | 121 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 13 +++
6 files changed, 172 insertions(+), 3 deletions(-)
create mode 100755 target/linux/ramips/base-files/etc/board.d/03_gpio_switches
create mode 100644 target/linux/ramips/dts/UBNT-ERX-SFP.dts
--
2.1.4
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
