- Refresh all patches
- Removed upstreamed
- Adapted 1
Compiled & Tested on targets: cns3xxx & imx6
Signed-off-by: Koen Vandeputte <koen.vandepu...@ncentric.com>
---
include/kernel-version.mk | 4 +-
.../802-usb-xhci-force-msi-renesas-xhci.patch | 2 +-
...X-Add-back-handler-ignoring-external-impr.patch | 75 ------------
...-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch | 41 -------
...ave-host-bridge-window-resource-in-struct.patch | 131 ---------------------
...-add-support-for-performing-fake-doorbell.patch | 10 +-
.../patches-4.9/905-BCM53573-minor-hacks.patch | 2 +-
.../patches-4.9/950-0031-Add-dwc_otg-driver.patch | 2 +-
...-thermal-driver-for-reporting-core-temper.patch | 2 +-
...le-CONFIG_MEMCG-but-leave-it-disabled-due.patch | 4 +-
...-Fix-hang-for-writing-messages-larger-tha.patch | 90 --------------
.../031-ubifs-fix-RENAME_WHITEOUT-support.patch | 25 ----
.../040-01-MIPS-Introduce-irq_stack.patch | 70 -----------
...2-MIPS-Stack-unwinding-while-on-IRQ-stack.patch | 42 -------
...hange-28-to-thread_info-if-coming-from-us.patch | 48 --------
...IPS-Switch-to-the-irq_stack-in-interrupts.patch | 116 ------------------
...05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch | 21 ----
...ack-Fix-erroneous-jal-to-plat_irq_dispatc.patch | 35 ------
...part-fix-parsing-first-block-after-aligne.patch | 40 -------
...jecting-with-source-address-failed-policy.patch | 16 +--
.../810-pci_disable_common_quirks.patch | 6 +-
.../generic/patches-4.9/904-debloat_dma_buf.patch | 2 +-
...sdhc-imx-increase-the-pad-I-O-drive-stren.patch | 42 -------
...om-use-scm_call-to-route-GPIO-irq-to-Apps.patch | 2 +-
.../0008-MIPS-lantiq-backport-old-timer-code.patch | 2 +-
...-lantiq-wifi-and-ethernet-eeprom-handling.patch | 2 +-
...soc-mediatek-Add-MT2701-power-dt-bindings.patch | 10 +-
...k-Refine-scpsys-to-support-multiple-platf.patch | 19 ++-
...015-soc-mediatek-Add-MT2701-scpsys-driver.patch | 12 +-
.../patches-4.9/0071-pwm-add-pwm-mediatek.patch | 16 +--
.../linux/mediatek/patches-4.9/0083-mfd-led3.patch | 4 +-
.../mediatek/patches-4.9/0085-pmic-led0.patch | 3 -
.../mediatek/patches-4.9/0086-pmic-led1.patch | 4 +-
.../mediatek/patches-4.9/0087-pmic-led2.patch | 10 +-
.../mediatek/patches-4.9/0088-pmic-led3.patch | 4 +-
target/linux/mediatek/patches-4.9/0091-dsa1.patch | 3 -
.../0091-net-next-mediatek-fix-DQL-support.patch | 6 +-
target/linux/mediatek/patches-4.9/0092-dsa2.patch | 23 +---
target/linux/mediatek/patches-4.9/0092-dsa3.patch | 6 +-
target/linux/mediatek/patches-4.9/0092-dsa4.patch | 4 +-
target/linux/mediatek/patches-4.9/0092-dsa5.patch | 16 +--
.../mediatek/patches-4.9/0093-dsa-compat.patch | 18 +--
.../mediatek/patches-4.9/0094-net-affinity.patch | 12 +-
target/linux/mediatek/patches-4.9/0095-ephy.patch | 12 +-
.../mediatek/patches-4.9/0096-dsa-multi-cpu.patch | 30 ++---
.../mediatek/patches-4.9/0097-dsa-mt7530.patch | 6 +-
.../patches-4.9/200-rt3883-fix-pinctrl-typo.patch | 21 ----
47 files changed, 91 insertions(+), 980 deletions(-)
delete mode 100644
target/linux/bcm53xx/patches-4.9/031-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
delete mode 100644
target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
delete mode 100644
target/linux/bcm53xx/patches-4.9/089-PCI-iproc-Save-host-bridge-window-resource-in-struct.patch
delete mode 100644
target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch
delete mode 100644
target/linux/generic/patches-4.9/031-ubifs-fix-RENAME_WHITEOUT-support.patch
delete mode 100644
target/linux/generic/patches-4.9/040-01-MIPS-Introduce-irq_stack.patch
delete mode 100644
target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
delete mode 100644
target/linux/generic/patches-4.9/040-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
delete mode 100644
target/linux/generic/patches-4.9/040-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
delete mode 100644
target/linux/generic/patches-4.9/040-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
delete mode 100644
target/linux/generic/patches-4.9/040-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
delete mode 100644
target/linux/generic/patches-4.9/060-0001-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
delete mode 100644
target/linux/imx6/patches-4.9/0003-mmc-sdhci-esdhc-imx-increase-the-pad-I-O-drive-stren.patch
delete mode 100644
target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 0a58a45..dce59d6 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .43
LINUX_VERSION-4.4 = .61
-LINUX_VERSION-4.9 = .20
+LINUX_VERSION-4.9 = .25
LINUX_KERNEL_HASH-3.18.43 =
1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
LINUX_KERNEL_HASH-4.4.61 =
30dee7164615ad8184eba4ea6f4906b3ceb2fe462a8a4a929c8e9aab8d4a31da
-LINUX_KERNEL_HASH-4.9.20 =
48660806dd32fb8dcbcf5932291bf6cc7d29240070372230871e0f56fea81341
+LINUX_KERNEL_HASH-4.9.25 =
82ade4695a21a7058f1537f22b64db62fe23e6c3aa57cc55be427e30cbf92e37
ifdef KERNEL_PATCHVER
LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))
diff --git
a/target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
b/target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
index a201d79..86cab14 100644
---
a/target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
+++
b/target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
@@ -44,7 +44,7 @@ produce a noisy warning.
/* hcd->irq is 0, we have MSI */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1674,6 +1674,7 @@ struct xhci_hcd {
+@@ -1677,6 +1677,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
diff --git
a/target/linux/bcm53xx/patches-4.9/031-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
b/target/linux/bcm53xx/patches-4.9/031-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
deleted file mode 100644
index a4f32f5..0000000
---
a/target/linux/bcm53xx/patches-4.9/031-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 09f3510fb70a46c8921f2cf4a90dbcae460a6820 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <ra...@milecki.pl>
-Date: Sat, 29 Oct 2016 13:12:29 +0200
-Subject: [PATCH] ARM: BCM5301X: Add back handler ignoring external imprecise
- aborts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Since early BCM5301X days we got abort handler that was removed by
-commit 937b12306ea79 ("ARM: BCM5301X: remove workaround imprecise abort
-fault handler"). It assumed we need to deal only with pending aborts
-left by the bootloader. Unfortunately this isn't true for BCM5301X.
-
-When probing PCI config space (device enumeration) it is expected to
-have master aborts on the PCI bus. Most bridges don't forward (or they
-allow disabling it) these errors onto the AXI/AMBA bus but not the
-Northstar (BCM5301X) one.
-
-iProc PCIe controller on Northstar seems to be some older one, without
-a control register for errors forwarding. It means we need to workaround
-this at platform level. All newer platforms are not affected by this
-issue.
-
-Signed-off-by: Rafał Miłecki <ra...@milecki.pl>
-Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
----
- arch/arm/mach-bcm/bcm_5301x.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -9,14 +9,42 @@
- #include <asm/hardware/cache-l2x0.h>
-
- #include <asm/mach/arch.h>
-+#include <asm/siginfo.h>
-+#include <asm/signal.h>
-+
-+#define FSR_EXTERNAL (1 << 12)
-+#define FSR_READ (0 << 10)
-+#define FSR_IMPRECISE 0x0406
-
- static const char *const bcm5301x_dt_compat[] __initconst = {
- "brcm,bcm4708",
- NULL,
- };
-
-+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-+ struct pt_regs *regs)
-+{
-+ /*
-+ * We want to ignore aborts forwarded from the PCIe bus that are
-+ * expected and shouldn't really be passed by the PCIe controller.
-+ * The biggest disadvantage is the same FSR code may be reported when
-+ * reading non-existing APB register and we shouldn't ignore that.
-+ */
-+ if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE))
-+ return 0;
-+
-+ return 1;
-+}
-+
-+static void __init bcm5301x_init_early(void)
-+{
-+ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-+ "imprecise external abort");
-+}
-+
- DT_MACHINE_START(BCM5301X, "BCM5301X")
- .l2c_aux_val = 0,
- .l2c_aux_mask = ~0,
- .dt_compat = bcm5301x_dt_compat,
-+ .init_early = bcm5301x_init_early,
- MACHINE_END
diff --git
a/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
b/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
deleted file mode 100644
index 70df201..0000000
---
a/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 0e34079cd1f674449749aafe4be07336177de90d Mon Sep 17 00:00:00 2001
-From: Jon Mason <jon.ma...@broadcom.com>
-Date: Thu, 2 Mar 2017 19:21:32 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-GIC_PPI flags were misconfigured for the timers, resulting in errors
-like:
-[ 0.000000] GIC: PPI11 is secure or misconfigured
-
-Changing them to being edge triggered corrects the issue
-
-Suggested-by: Rafał Miłecki <ra...@milecki.pl>
-Signed-off-by: Jon Mason <jon.ma...@broadcom.com>
-Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
-Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -66,14 +66,14 @@
- timer@20200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x20200 0x100>;
-- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
- clocks = <&periph_clk>;
- };
-
- local-timer@20600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20600 0x100>;
-- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
- clocks = <&periph_clk>;
- };
-
diff --git
a/target/linux/bcm53xx/patches-4.9/089-PCI-iproc-Save-host-bridge-window-resource-in-struct.patch
b/target/linux/bcm53xx/patches-4.9/089-PCI-iproc-Save-host-bridge-window-resource-in-struct.patch
deleted file mode 100644
index 3de4395..0000000
---
a/target/linux/bcm53xx/patches-4.9/089-PCI-iproc-Save-host-bridge-window-resource-in-struct.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 6e347b5e05ea2ac4ac467a5a1cfaebb2c7f06f80 Mon Sep 17 00:00:00 2001
-From: Bjorn Helgaas <bhelg...@google.com>
-Date: Thu, 9 Mar 2017 11:27:07 -0600
-Subject: [PATCH] PCI: iproc: Save host bridge window resource in struct
- iproc_pcie
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The host bridge memory window resource is inserted into the iomem_resource
-tree and cannot be deallocated until the host bridge itself is removed.
-
-Previously, the window was on the stack, which meant the iomem_resource
-entry pointed into the stack and was corrupted as soon as the probe
-function returned, which caused memory corruption and errors like this:
-
- pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff]
conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]
-
-Move the memory window resource from the stack into struct iproc_pcie so
-its lifetime matches that of the host bridge.
-
-Fixes: c3245a566400 ("PCI: iproc: Request host bridge window resources")
-Reported-and-tested-by: Rafał Miłecki <zaj...@gmail.com>
-Signed-off-by: Bjorn Helgaas <bhelg...@google.com>
-CC: sta...@vger.kernel.org # v4.8+
----
- drivers/pci/host/pcie-iproc-bcma.c | 24 ++++++++++++------------
- drivers/pci/host/pcie-iproc-platform.c | 19 ++++++++++---------
- drivers/pci/host/pcie-iproc.h | 1 +
- 3 files changed, 23 insertions(+), 21 deletions(-)
-
---- a/drivers/pci/host/pcie-iproc-bcma.c
-+++ b/drivers/pci/host/pcie-iproc-bcma.c
-@@ -44,8 +44,7 @@ static int iproc_pcie_bcma_probe(struct
- {
- struct device *dev = &bdev->dev;
- struct iproc_pcie *pcie;
-- LIST_HEAD(res);
-- struct resource res_mem;
-+ LIST_HEAD(resources);
- int ret;
-
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-@@ -62,22 +61,23 @@ static int iproc_pcie_bcma_probe(struct
-
- pcie->base_addr = bdev->addr;
-
-- res_mem.start = bdev->addr_s[0];
-- res_mem.end = bdev->addr_s[0] + SZ_128M - 1;
-- res_mem.name = "PCIe MEM space";
-- res_mem.flags = IORESOURCE_MEM;
-- pci_add_resource(&res, &res_mem);
-+ pcie->mem.start = bdev->addr_s[0];
-+ pcie->mem.end = bdev->addr_s[0] + SZ_128M - 1;
-+ pcie->mem.name = "PCIe MEM space";
-+ pcie->mem.flags = IORESOURCE_MEM;
-+ pci_add_resource(&resources, &pcie->mem);
-
- pcie->map_irq = iproc_pcie_bcma_map_irq;
-
-- ret = iproc_pcie_setup(pcie, &res);
-- if (ret)
-+ ret = iproc_pcie_setup(pcie, &resources);
-+ if (ret) {
- dev_err(dev, "PCIe controller setup failed\n");
--
-- pci_free_resource_list(&res);
-+ pci_free_resource_list(&resources);
-+ return ret;
-+ }
-
- bcma_set_drvdata(bdev, pcie);
-- return ret;
-+ return 0;
- }
-
- static void iproc_pcie_bcma_remove(struct bcma_device *bdev)
---- a/drivers/pci/host/pcie-iproc-platform.c
-+++ b/drivers/pci/host/pcie-iproc-platform.c
-@@ -46,7 +46,7 @@ static int iproc_pcie_pltfm_probe(struct
- struct device_node *np = dev->of_node;
- struct resource reg;
- resource_size_t iobase = 0;
-- LIST_HEAD(res);
-+ LIST_HEAD(resources);
- int ret;
-
- of_id = of_match_device(iproc_pcie_of_match_table, dev);
-@@ -108,23 +108,24 @@ static int iproc_pcie_pltfm_probe(struct
- pcie->phy = NULL;
- }
-
-- ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &iobase);
-+ ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &resources,
-+ &iobase);
- if (ret) {
-- dev_err(dev,
-- "unable to get PCI host bridge resources\n");
-+ dev_err(dev, "unable to get PCI host bridge resources\n");
- return ret;
- }
-
- pcie->map_irq = of_irq_parse_and_map_pci;
-
-- ret = iproc_pcie_setup(pcie, &res);
-- if (ret)
-+ ret = iproc_pcie_setup(pcie, &resources);
-+ if (ret) {
- dev_err(dev, "PCIe controller setup failed\n");
--
-- pci_free_resource_list(&res);
-+ pci_free_resource_list(&resources);
-+ return ret;
-+ }
-
- platform_set_drvdata(pdev, pcie);
-- return ret;
-+ return 0;
- }
-
- static int iproc_pcie_pltfm_remove(struct platform_device *pdev)
---- a/drivers/pci/host/pcie-iproc.h
-+++ b/drivers/pci/host/pcie-iproc.h
-@@ -68,6 +68,7 @@ struct iproc_pcie {
- #ifdef CONFIG_ARM
- struct pci_sys_data sysdata;
- #endif
-+ struct resource mem;
- struct pci_bus *root_bus;
- struct phy *phy;
- int (*map_irq)(const struct pci_dev *, u8, u8);
diff --git
a/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
b/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
index 9e5bd83..83ea89b 100644
---
a/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++
b/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
@@ -127,11 +127,11 @@ it on BCM4708 family.
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1657,6 +1657,7 @@ struct xhci_hcd {
- #define XHCI_SSIC_PORT_UNUSED (1 << 22)
- #define XHCI_NO_64BIT_SUPPORT (1 << 23)
+@@ -1659,6 +1659,7 @@ struct xhci_hcd {
#define XHCI_MISSING_CAS (1 << 24)
-+#define XHCI_FAKE_DOORBELL (1 << 25)
+ /* For controller with a broken Port Disable implementation */
+ #define XHCI_BROKEN_PORT_PED (1 << 25)
++#define XHCI_FAKE_DOORBELL (1 << 26)
+
unsigned int num_active_eps;
unsigned int limit_active_eps;
- /* There are two roothubs to keep track of bus suspend info for */
diff --git a/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
b/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
index c702390..3245269 100644
--- a/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
+++ b/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
@@ -69,7 +69,7 @@ Signed-off-by: Rafał Miłecki <ra...@milecki.pl>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
-@@ -513,6 +514,16 @@ arch_timer_detect_rate(void __iomem *cnt
+@@ -514,6 +515,16 @@ arch_timer_detect_rate(void __iomem *cnt
arch_timer_rate = arch_timer_get_cntfrq();
}
diff --git
a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
index 0610d03..d13cae7 100644
--- a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
@@ -696,7 +696,7 @@ Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
}
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -5009,7 +5009,7 @@ static void port_event(struct usb_hub *h
+@@ -5016,7 +5016,7 @@ static void port_event(struct usb_hub *h
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
u16 status = 0, unused;
diff --git
a/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch
b/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch
index ff6084f..cbae56b 100644
---
a/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch
+++
b/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch
@@ -39,7 +39,7 @@ Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
depends on X86_THERMAL_VECTOR
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776
+@@ -42,6 +42,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
diff --git
a/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
b/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
index 73c9ede..e17a84d 100644
---
a/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
+++
b/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch
@@ -10,7 +10,7 @@ Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it
disabled (due to
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
-@@ -5626,7 +5626,7 @@ int __init cgroup_init_early(void)
+@@ -5627,7 +5627,7 @@ int __init cgroup_init_early(void)
return 0;
}
@@ -19,7 +19,7 @@ Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it
disabled (due to
/**
* cgroup_init - cgroup initialization
-@@ -6163,6 +6163,28 @@ static int __init cgroup_no_v1(char *str
+@@ -6164,6 +6164,28 @@ static int __init cgroup_no_v1(char *str
}
__setup("cgroup_no_v1=", cgroup_no_v1);
diff --git
a/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch
b/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch
deleted file mode 100644
index 899c75e..0000000
---
a/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 89b466914a0d49f08d00be25556ba22497b9a284 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <nor...@tronnes.org>
-Date: Sat, 17 Sep 2016 15:07:10 +0200
-Subject: [PATCH] i2c: bcm2835: Fix hang for writing messages larger than 16
- bytes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Writing messages larger than the FIFO size results in a hang, rendering
-the machine unusable. This is because the RXD status flag is set on the
-first interrupt which results in bcm2835_drain_rxfifo() stealing bytes
-from the buffer. The controller continues to trigger interrupts waiting
-for the missing bytes, but bcm2835_fill_txfifo() has none to give.
-In this situation wait_for_completion_timeout() apparently is unable to
-stop the madness.
-
-The BCM2835 ARM Peripherals datasheet has this to say about the flags:
- TXD: is set when the FIFO has space for at least one byte of data.
- RXD: is set when the FIFO contains at least one byte of data.
- TXW: is set during a write transfer and the FIFO is less than full.
- RXR: is set during a read transfer and the FIFO is or more full.
-
-Implementing the logic from the downstream i2c-bcm2708 driver solved
-the hang problem.
-
-Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
-Reviewed-by: Eric Anholt <e...@anholt.net>
-Reviewed-by: Martin Sperl <ker...@martin.sperl.org>
----
- drivers/i2c/busses/i2c-bcm2835.c | 22 ++++++++++++++--------
- 1 file changed, 14 insertions(+), 8 deletions(-)
-
---- a/drivers/i2c/busses/i2c-bcm2835.c
-+++ b/drivers/i2c/busses/i2c-bcm2835.c
-@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev {
- int irq;
- struct i2c_adapter adapter;
- struct completion completion;
-+ struct i2c_msg *curr_msg;
- u32 msg_err;
- u8 *msg_buf;
- size_t msg_buf_remaining;
-@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int t
- return IRQ_HANDLED;
- }
-
-- if (val & BCM2835_I2C_S_RXD) {
-- bcm2835_drain_rxfifo(i2c_dev);
-- if (!(val & BCM2835_I2C_S_DONE))
-- return IRQ_HANDLED;
-- }
--
- if (val & BCM2835_I2C_S_DONE) {
-- if (i2c_dev->msg_buf_remaining)
-+ if (i2c_dev->curr_msg->flags & I2C_M_RD) {
-+ bcm2835_drain_rxfifo(i2c_dev);
-+ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
-+ }
-+
-+ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
- i2c_dev->msg_err = BCM2835_I2C_S_LEN;
- else
- i2c_dev->msg_err = 0;
-@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int t
- return IRQ_HANDLED;
- }
-
-- if (val & BCM2835_I2C_S_TXD) {
-+ if (val & BCM2835_I2C_S_TXW) {
- bcm2835_fill_txfifo(i2c_dev);
- return IRQ_HANDLED;
- }
-
-+ if (val & BCM2835_I2C_S_RXR) {
-+ bcm2835_drain_rxfifo(i2c_dev);
-+ return IRQ_HANDLED;
-+ }
-+
- return IRQ_NONE;
- }
-
-@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct b
- u32 c;
- unsigned long time_left;
-
-+ i2c_dev->curr_msg = msg;
- i2c_dev->msg_buf = msg->buf;
- i2c_dev->msg_buf_remaining = msg->len;
- reinit_completion(&i2c_dev->completion);
diff --git
a/target/linux/generic/patches-4.9/031-ubifs-fix-RENAME_WHITEOUT-support.patch
b/target/linux/generic/patches-4.9/031-ubifs-fix-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index 7b81afb..0000000
---
a/target/linux/generic/patches-4.9/031-ubifs-fix-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <n...@nbd.name>
-Date: Mon, 6 Mar 2017 09:48:52 +0100
-Subject: [PATCH] ubifs: fix RENAME_WHITEOUT support
-
-Remove faulty leftover check in do_rename(), apparently introduced in a
-merge that combined whiteout support changes with commit f03b8ad8d386
-("fs: support RENAME_NOREPLACE for local filesystems")
-
-Fixes: 9e0a1fff8db5 ("ubifs: Implement RENAME_WHITEOUT")
-Cc: sta...@vger.kernel.org
-Signed-off-by: Felix Fietkau <n...@nbd.name>
----
-
---- a/fs/ubifs/dir.c
-+++ b/fs/ubifs/dir.c
-@@ -1088,9 +1088,6 @@ static int do_rename(struct inode *old_d
- struct timespec time;
- unsigned int uninitialized_var(saved_nlink);
-
-- if (flags & ~RENAME_NOREPLACE)
-- return -EINVAL;
--
- /*
- * Budget request settings: deletion direntry, new direntry, removing
- * the old inode, and changing old and new parent directory inodes.
diff --git
a/target/linux/generic/patches-4.9/040-01-MIPS-Introduce-irq_stack.patch
b/target/linux/generic/patches-4.9/040-01-MIPS-Introduce-irq_stack.patch
deleted file mode 100644
index 1cdbcda..0000000
--- a/target/linux/generic/patches-4.9/040-01-MIPS-Introduce-irq_stack.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:56 +0000
-Subject: [PATCH] MIPS: Introduce irq_stack
-
-Allocate a per-cpu irq stack for use within interrupt handlers.
-
-Also add a utility function on_irq_stack to determine if a given stack
-pointer is within the irq stack for that cpu.
-
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
----
-
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -17,6 +17,18 @@
-
- #include <irq.h>
-
-+#define IRQ_STACK_SIZE THREAD_SIZE
-+
-+extern void *irq_stack[NR_CPUS];
-+
-+static inline bool on_irq_stack(int cpu, unsigned long sp)
-+{
-+ unsigned long low = (unsigned long)irq_stack[cpu];
-+ unsigned long high = low + IRQ_STACK_SIZE;
-+
-+ return (low <= sp && sp <= high);
-+}
-+
- #ifdef CONFIG_I8259
- static inline int irq_canonicalize(int irq)
- {
---- a/arch/mips/kernel/asm-offsets.c
-+++ b/arch/mips/kernel/asm-offsets.c
-@@ -102,6 +102,7 @@ void output_thread_info_defines(void)
- OFFSET(TI_REGS, thread_info, regs);
- DEFINE(_THREAD_SIZE, THREAD_SIZE);
- DEFINE(_THREAD_MASK, THREAD_MASK);
-+ DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
- BLANK();
- }
-
---- a/arch/mips/kernel/irq.c
-+++ b/arch/mips/kernel/irq.c
-@@ -25,6 +25,8 @@
- #include <linux/atomic.h>
- #include <asm/uaccess.h>
-
-+void *irq_stack[NR_CPUS];
-+
- /*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
-@@ -58,6 +60,15 @@ void __init init_IRQ(void)
- clear_c0_status(ST0_IM);
-
- arch_init_irq();
-+
-+ for_each_possible_cpu(i) {
-+ int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
-+ void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
-+
-+ irq_stack[i] = s;
-+ pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
-+ irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE);
-+ }
- }
-
- #ifdef CONFIG_DEBUG_STACKOVERFLOW
diff --git
a/target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
b/target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
deleted file mode 100644
index b2e90c8..0000000
---
a/target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:57 +0000
-Subject: [PATCH] MIPS: Stack unwinding while on IRQ stack
-
-Within unwind stack, check if the stack pointer being unwound is within
-the CPU's irq_stack and if so use that page rather than the task's stack
-page.
-
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -33,6 +33,7 @@
- #include <asm/dsemul.h>
- #include <asm/dsp.h>
- #include <asm/fpu.h>
-+#include <asm/irq.h>
- #include <asm/msa.h>
- #include <asm/pgtable.h>
- #include <asm/mipsregs.h>
-@@ -556,7 +557,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
- unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
- unsigned long pc, unsigned long *ra)
- {
-- unsigned long stack_page = (unsigned long)task_stack_page(task);
-+ unsigned long stack_page = 0;
-+ int cpu;
-+
-+ for_each_possible_cpu(cpu) {
-+ if (on_irq_stack(cpu, *sp)) {
-+ stack_page = (unsigned long)irq_stack[cpu];
-+ break;
-+ }
-+ }
-+
-+ if (!stack_page)
-+ stack_page = (unsigned long)task_stack_page(task);
-+
- return unwind_stack_by_address(stack_page, sp, pc, ra);
- }
- #endif
diff --git
a/target/linux/generic/patches-4.9/040-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
b/target/linux/generic/patches-4.9/040-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
deleted file mode 100644
index e13c67b..0000000
---
a/target/linux/generic/patches-4.9/040-03-MIPS-Only-change-28-to-thread_info-if-coming-from-us.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:58 +0000
-Subject: [PATCH] MIPS: Only change $28 to thread_info if coming from user
- mode
-
-The SAVE_SOME macro is used to save the execution context on all
-exceptions.
-If an exception occurs while executing user code, the stack is switched
-to the kernel's stack for the current task, and register $28 is switched
-to point to the current_thread_info, which is at the bottom of the stack
-region.
-If the exception occurs while executing kernel code, the stack is left,
-and this change ensures that register $28 is not updated. This is the
-correct behaviour when the kernel can be executing on the separate irq
-stack, because the thread_info will not be at the base of it.
-
-With this change, register $28 is only switched to it's kernel
-conventional usage of the currrent thread info pointer at the point at
-which execution enters kernel space. Doing it on every exception was
-redundant, but OK without an IRQ stack, but will be erroneous once that
-is introduced.
-
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
-Reviewed-by: Maciej W. Rozycki <ma...@imgtec.com>
----
-
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -216,12 +216,19 @@
- LONG_S $25, PT_R25(sp)
- LONG_S $28, PT_R28(sp)
- LONG_S $31, PT_R31(sp)
-+
-+ /* Set thread_info if we're coming from user mode */
-+ mfc0 k0, CP0_STATUS
-+ sll k0, 3 /* extract cu0 bit */
-+ bltz k0, 9f
-+
- ori $28, sp, _THREAD_MASK
- xori $28, _THREAD_MASK
- #ifdef CONFIG_CPU_CAVIUM_OCTEON
- .set mips64
- pref 0, 0($28) /* Prefetch the current pointer */
- #endif
-+9:
- .set pop
- .endm
-
diff --git
a/target/linux/generic/patches-4.9/040-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
b/target/linux/generic/patches-4.9/040-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
deleted file mode 100644
index 0c7e45b..0000000
---
a/target/linux/generic/patches-4.9/040-04-MIPS-Switch-to-the-irq_stack-in-interrupts.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Mon, 19 Dec 2016 14:20:59 +0000
-Subject: [PATCH] MIPS: Switch to the irq_stack in interrupts
-
-When enterring interrupt context via handle_int or except_vec_vi, switch
-to the irq_stack of the current CPU if it is not already in use.
-
-The current stack pointer is masked with the thread size and compared to
-the base or the irq stack. If it does not match then the stack pointer
-is set to the top of that stack, otherwise this is a nested irq being
-handled on the irq stack so the stack pointer should be left as it was.
-
-The in-use stack pointer is placed in the callee saved register s1. It
-will be saved to the stack when plat_irq_dispatch is invoked and can be
-restored once control returns here.
-
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
----
-
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -187,9 +187,44 @@ NESTED(handle_int, PT_SIZE, sp)
-
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
-- PTR_LA ra, ret_from_irq
-- PTR_LA v0, plat_irq_dispatch
-- jr v0
-+
-+ /*
-+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
-+ * Check if we are already using the IRQ stack.
-+ */
-+ move s1, sp # Preserve the sp
-+
-+ /* Get IRQ stack for this CPU */
-+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
-+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
-+ lui k1, %hi(irq_stack)
-+#else
-+ lui k1, %highest(irq_stack)
-+ daddiu k1, %higher(irq_stack)
-+ dsll k1, 16
-+ daddiu k1, %hi(irq_stack)
-+ dsll k1, 16
-+#endif
-+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
-+ LONG_ADDU k1, k0
-+ LONG_L t0, %lo(irq_stack)(k1)
-+
-+ # Check if already on IRQ stack
-+ PTR_LI t1, ~(_THREAD_SIZE-1)
-+ and t1, t1, sp
-+ beq t0, t1, 2f
-+
-+ /* Switch to IRQ stack */
-+ li t1, _IRQ_STACK_SIZE
-+ PTR_ADD sp, t0, t1
-+
-+2:
-+ jal plat_irq_dispatch
-+
-+ /* Restore sp */
-+ move sp, s1
-+
-+ j ret_from_irq
- #ifdef CONFIG_CPU_MICROMIPS
- nop
- #endif
-@@ -262,8 +297,44 @@ NESTED(except_vec_vi_handler, 0, sp)
-
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
-- PTR_LA ra, ret_from_irq
-- jr v0
-+
-+ /*
-+ * SAVE_ALL ensures we are using a valid kernel stack for the thread.
-+ * Check if we are already using the IRQ stack.
-+ */
-+ move s1, sp # Preserve the sp
-+
-+ /* Get IRQ stack for this CPU */
-+ ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG
-+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
-+ lui k1, %hi(irq_stack)
-+#else
-+ lui k1, %highest(irq_stack)
-+ daddiu k1, %higher(irq_stack)
-+ dsll k1, 16
-+ daddiu k1, %hi(irq_stack)
-+ dsll k1, 16
-+#endif
-+ LONG_SRL k0, SMP_CPUID_PTRSHIFT
-+ LONG_ADDU k1, k0
-+ LONG_L t0, %lo(irq_stack)(k1)
-+
-+ # Check if already on IRQ stack
-+ PTR_LI t1, ~(_THREAD_SIZE-1)
-+ and t1, t1, sp
-+ beq t0, t1, 2f
-+
-+ /* Switch to IRQ stack */
-+ li t1, _IRQ_STACK_SIZE
-+ PTR_ADD sp, t0, t1
-+
-+2:
-+ jal plat_irq_dispatch
-+
-+ /* Restore sp */
-+ move sp, s1
-+
-+ j ret_from_irq
- END(except_vec_vi_handler)
-
- /*
diff --git
a/target/linux/generic/patches-4.9/040-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
b/target/linux/generic/patches-4.9/040-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
deleted file mode 100644
index a4942b8..0000000
---
a/target/linux/generic/patches-4.9/040-05-MIPS-Select-HAVE_IRQ_EXIT_ON_IRQ_STACK.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Mon, 19 Dec 2016 14:21:00 +0000
-Subject: [PATCH] MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK
-
-Since do_IRQ is now invoked on a separate IRQ stack, we select
-HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly
-from irq_exit(), rather than requiring do_softirq_own_stack.
-
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
----
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -9,6 +9,7 @@ config MIPS
- select HAVE_CONTEXT_TRACKING
- select HAVE_GENERIC_DMA_COHERENT
- select HAVE_IDE
-+ select HAVE_IRQ_EXIT_ON_IRQ_STACK
- select HAVE_OPROFILE
- select HAVE_PERF_EVENTS
- select PERF_USE_VMALLOC
diff --git
a/target/linux/generic/patches-4.9/040-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
b/target/linux/generic/patches-4.9/040-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
deleted file mode 100644
index bb16bb1..0000000
---
a/target/linux/generic/patches-4.9/040-06-MIPS-IRQ-Stack-Fix-erroneous-jal-to-plat_irq_dispatc.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From de856416e7143e32afc4849625616554aa060f7a Mon Sep 17 00:00:00 2001
-From: Matt Redfearn <matt.redfe...@imgtec.com>
-Date: Wed, 25 Jan 2017 17:00:25 +0000
-Subject: [PATCH] MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
-
-Commit dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
-changed both the normal and vectored interrupt handlers. Unfortunately
-the vectored version, "except_vec_vi_handler", was incorrectly modified
-to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
-the vectored handler that has been set up. This is ok for many platforms
-which set the vectored handler to plat_irq_dispatch anyway, but will
-cause problems with platforms that use other handlers.
-
-Fixes: dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
-Signed-off-by: Matt Redfearn <matt.redfe...@imgtec.com>
-Cc: Ralf Baechle <r...@linux-mips.org>
-Cc: Paul Burton <paul.bur...@imgtec.com>
-Cc: linux-m...@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/15110/
-Signed-off-by: James Hogan <james.ho...@imgtec.com>
----
- arch/mips/kernel/genex.S | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -329,7 +329,7 @@ NESTED(except_vec_vi_handler, 0, sp)
- PTR_ADD sp, t0, t1
-
- 2:
-- jal plat_irq_dispatch
-+ jalr v0
-
- /* Restore sp */
- move sp, s1
diff --git
a/target/linux/generic/patches-4.9/060-0001-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
b/target/linux/generic/patches-4.9/060-0001-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
deleted file mode 100644
index 7eed777..0000000
---
a/target/linux/generic/patches-4.9/060-0001-mtd-bcm47xxpart-fix-parsing-first-block-after-aligne.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From bd5d21310133921021d78995ad6346f908483124 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <ra...@milecki.pl>
-Date: Sun, 20 Nov 2016 16:09:30 +0100
-Subject: [PATCH] mtd: bcm47xxpart: fix parsing first block after aligned TRX
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-After parsing TRX we should skip to the first block placed behind it.
-Our code was working only with TRX with length not aligned to the
-blocksize. In other cases (length aligned) it was missing the block
-places right after TRX.
-
-This fixes calculation and simplifies the comment.
-
-Signed-off-by: Rafał Miłecki <ra...@milecki.pl>
-Signed-off-by: Brian Norris <computersforpe...@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -229,12 +229,10 @@ static int bcm47xxpart_parse(struct mtd_
-
- last_trx_part = curr_part - 1;
-
-- /*
-- * We have whole TRX scanned, skip to the next part. Use
-- * roundown (not roundup), as the loop will increase
-- * offset in next step.
-- */
-- offset = rounddown(offset + trx->length, blocksize);
-+ /* Jump to the end of TRX */
-+ offset = roundup(offset + trx->length, blocksize);
-+ /* Next loop iteration will increase the offset */
-+ offset -= blocksize;
- continue;
- }
-
diff --git
a/target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
b/target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
index 7c5cb45..5a86131 100644
---
a/target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++
b/target/linux/generic/patches-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -155,7 +155,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
case RTN_THROW:
case RTN_UNREACHABLE:
default:
-@@ -2594,6 +2616,17 @@ static int ip6_pkt_prohibit_out(struct n
+@@ -2596,6 +2618,17 @@ static int ip6_pkt_prohibit_out(struct n
return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED,
IPSTATS_MIB_OUTNOROUTES);
}
@@ -173,7 +173,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
/*
* Allocate a dst for local (unicast / anycast) address.
*/
-@@ -2829,7 +2862,8 @@ static int rtm_to_fib6_config(struct sk_
+@@ -2831,7 +2864,8 @@ static int rtm_to_fib6_config(struct sk_
if (rtm->rtm_type == RTN_UNREACHABLE ||
rtm->rtm_type == RTN_BLACKHOLE ||
rtm->rtm_type == RTN_PROHIBIT ||
@@ -183,7 +183,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
cfg->fc_flags |= RTF_REJECT;
if (rtm->rtm_type == RTN_LOCAL)
-@@ -3207,6 +3241,9 @@ static int rt6_fill_node(struct net *net
+@@ -3209,6 +3243,9 @@ static int rt6_fill_node(struct net *net
case -EACCES:
rtm->rtm_type = RTN_PROHIBIT;
break;
@@ -193,7 +193,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
case -EAGAIN:
rtm->rtm_type = RTN_THROW;
break;
-@@ -3480,6 +3517,8 @@ static int ip6_route_dev_notify(struct n
+@@ -3482,6 +3519,8 @@ static int ip6_route_dev_notify(struct n
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.ip6_prohibit_entry->dst.dev = dev;
net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
#endif
-@@ -3696,6 +3735,17 @@ static int __net_init ip6_route_net_init
+@@ -3698,6 +3737,17 @@ static int __net_init ip6_route_net_init
net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
ip6_template_metrics, true);
@@ -220,7 +220,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
#endif
net->ipv6.sysctl.flush_delay = 0;
-@@ -3714,6 +3764,8 @@ out:
+@@ -3716,6 +3766,8 @@ out:
return ret;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -229,7 +229,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
out_ip6_prohibit_entry:
kfree(net->ipv6.ip6_prohibit_entry);
out_ip6_null_entry:
-@@ -3731,6 +3783,7 @@ static void __net_exit ip6_route_net_exi
+@@ -3733,6 +3785,7 @@ static void __net_exit ip6_route_net_exi
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
kfree(net->ipv6.ip6_blk_hole_entry);
@@ -237,7 +237,7 @@ Signed-off-by: Jonas Gorski <j...@openwrt.org>
#endif
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
}
-@@ -3828,6 +3881,9 @@ int __init ip6_route_init(void)
+@@ -3830,6 +3883,9 @@ int __init ip6_route_init(void)
init_net.ipv6.ip6_prohibit_entry->rt6i_idev =
in6_dev_get(init_net.loopback_dev);
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev =
in6_dev_get(init_net.loopback_dev);
diff --git
a/target/linux/generic/patches-4.9/810-pci_disable_common_quirks.patch
b/target/linux/generic/patches-4.9/810-pci_disable_common_quirks.patch
index 99ffb5e..cb9fa19 100644
--- a/target/linux/generic/patches-4.9/810-pci_disable_common_quirks.patch
+++ b/target/linux/generic/patches-4.9/810-pci_disable_common_quirks.patch
@@ -23,7 +23,7 @@
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -3016,6 +3017,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3038,6 +3039,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
@@ -31,7 +31,7 @@
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
To
-@@ -3072,6 +3074,8 @@ static void fixup_debug_report(struct pc
+@@ -3094,6 +3096,8 @@ static void fixup_debug_report(struct pc
}
}
@@ -40,7 +40,7 @@
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -3106,6 +3110,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3128,6 +3132,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
diff --git a/target/linux/generic/patches-4.9/904-debloat_dma_buf.patch
b/target/linux/generic/patches-4.9/904-debloat_dma_buf.patch
index 91a3870..25c9851 100644
--- a/target/linux/generic/patches-4.9/904-debloat_dma_buf.patch
+++ b/target/linux/generic/patches-4.9/904-debloat_dma_buf.patch
@@ -32,7 +32,7 @@
#include <uapi/linux/dma-buf.h>
-@@ -974,4 +975,5 @@ static void __exit dma_buf_deinit(void)
+@@ -977,4 +978,5 @@ static void __exit dma_buf_deinit(void)
{
dma_buf_uninit_debugfs();
}
diff --git
a/target/linux/imx6/patches-4.9/0003-mmc-sdhci-esdhc-imx-increase-the-pad-I-O-drive-stren.patch
b/target/linux/imx6/patches-4.9/0003-mmc-sdhci-esdhc-imx-increase-the-pad-I-O-drive-stren.patch
deleted file mode 100644
index f97e829..0000000
---
a/target/linux/imx6/patches-4.9/0003-mmc-sdhci-esdhc-imx-increase-the-pad-I-O-drive-stren.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 9f327845358d3dd0d8a5a7a5436b0aa5c432e757 Mon Sep 17 00:00:00 2001
-From: Haibo Chen <haibo.c...@nxp.com>
-Date: Wed, 19 Apr 2017 10:53:51 +0800
-Subject: [PATCH] mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for
- DDR50 card
-
-Currently for DDR50 card, it need tuning in default. We meet tuning fail
-issue for DDR50 card and some data CRC error when DDR50 sd card works.
-
-This is because the default pad I/O drive strength can't make sure DDR50
-card work stable. So increase the pad I/O drive strength for DDR50 card,
-and use pins_100mhz.
-
-This fixes DDR50 card support for IMX since DDR50 tuning was enabled from
-commit 9faac7b95ea4 ("mmc: sdhci: enable tuning for DDR50")
-
-Tested-and-reported-by: Tim Harvey <thar...@gateworks.com>
-Signed-off-by: Haibo Chen <haibo.c...@nxp.com>
-Cc: sta...@vger.kernel.org # v4.4+
-Acked-by: Dong Aisheng <aisheng.d...@nxp.com>
-Acked-by: Adrian Hunter <adrian.hun...@intel.com>
-Signed-off-by: Ulf Hansson <ulf.hans...@linaro.org>
-Signed-off-by: Tim Harvey <thar...@gateworks.com>
----
- drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
b/drivers/mmc/host/sdhci-esdhc-imx.c
-index 7123ef9..445fc47 100644
---- a/drivers/mmc/host/sdhci-esdhc-imx.c
-+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
-@@ -830,6 +830,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
-
- switch (uhs) {
- case MMC_TIMING_UHS_SDR50:
-+ case MMC_TIMING_UHS_DDR50:
- pinctrl = imx_data->pins_100mhz;
- break;
- case MMC_TIMING_UHS_SDR104:
---
-2.7.4
-
diff --git
a/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
index 40656d1..c6a0470 100644
---
a/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
+++
b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
@@ -45,7 +45,7 @@ Signed-off-by: Ajay Kishore <aki...@codeaurora.org>
+ }
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
-@@ -358,3 +358,12 @@ int __qcom_scm_pas_mss_reset(struct devi
+@@ -365,3 +365,12 @@ int __qcom_scm_pas_mss_reset(struct devi
return ret ? : res.a1;
}
diff --git
a/target/linux/lantiq/patches-4.9/0008-MIPS-lantiq-backport-old-timer-code.patch
b/target/linux/lantiq/patches-4.9/0008-MIPS-lantiq-backport-old-timer-code.patch
index 5525503..f36a79a 100644
---
a/target/linux/lantiq/patches-4.9/0008-MIPS-lantiq-backport-old-timer-code.patch
+++
b/target/linux/lantiq/patches-4.9/0008-MIPS-lantiq-backport-old-timer-code.patch
@@ -176,7 +176,7 @@ Signed-off-by: John Crispin <blo...@openwrt.org>
-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
- obj-y += vmmc.o tffs.o
+ obj-y += vmmc.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/timer.c
diff --git
a/target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
b/target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
index d79b401..d875c55 100644
---
a/target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++
b/target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -29,7 +29,7 @@ Signed-off-by: John Crispin <blo...@openwrt.org>
+++ b/arch/mips/lantiq/xway/Makefile
@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
- obj-y += vmmc.o tffs.o
+ obj-y += vmmc.o
+obj-y += eth_mac.o
+obj-$(CONFIG_PCI) += ath5k_eep.o
diff --git
a/target/linux/mediatek/patches-4.9/00013-soc-mediatek-Add-MT2701-power-dt-bindings.patch
b/target/linux/mediatek/patches-4.9/00013-soc-mediatek-Add-MT2701-power-dt-bindings.patch
index 28b3d7f..ce38640 100644
---
a/target/linux/mediatek/patches-4.9/00013-soc-mediatek-Add-MT2701-power-dt-bindings.patch
+++
b/target/linux/mediatek/patches-4.9/00013-soc-mediatek-Add-MT2701-power-dt-bindings.patch
@@ -16,10 +16,8 @@ Signed-off-by: Matthias Brugger <matthias....@gmail.com>
2 files changed, 35 insertions(+), 5 deletions(-)
create mode 100644 include/dt-bindings/power/mt2701-power.h
-Index: linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-===================================================================
---- linux-4.9.14.orig/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
-+++ linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
++++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,17 +9,20 @@ domain control.
The driver implements the Generic PM domain bindings described in
@@ -46,10 +44,8 @@ Index:
linux-4.9.14/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
Optional properties:
- vdec-supply: Power supply for the vdec power domain
-Index: linux-4.9.14/include/dt-bindings/power/mt2701-power.h
-===================================================================
--- /dev/null
-+++ linux-4.9.14/include/dt-bindings/power/mt2701-power.h
++++ b/include/dt-bindings/power/mt2701-power.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2015 MediaTek Inc.
diff --git
a/target/linux/mediatek/patches-4.9/0014-soc-mediatek-Refine-scpsys-to-support-multiple-platf.patch
b/target/linux/mediatek/patches-4.9/0014-soc-mediatek-Refine-scpsys-to-support-multiple-platf.patch
index 4c9e790..0786e52 100644
---
a/target/linux/mediatek/patches-4.9/0014-soc-mediatek-Refine-scpsys-to-support-multiple-platf.patch
+++
b/target/linux/mediatek/patches-4.9/0014-soc-mediatek-Refine-scpsys-to-support-multiple-platf.patch
@@ -12,8 +12,6 @@ Signed-off-by: Matthias Brugger <matthias....@gmail.com>
drivers/soc/mediatek/mtk-scpsys.c | 348 +++++++++++++++++++++++---------------
1 file changed, 210 insertions(+), 138 deletions(-)
-diff --git a/drivers/soc/mediatek/mtk-scpsys.c
b/drivers/soc/mediatek/mtk-scpsys.c
-index 837effe19907..722aac80e611 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -11,17 +11,15 @@
@@ -181,7 +179,7 @@ index 837effe19907..722aac80e611 100644
struct genpd_onecell_data pd_data;
struct device *dev;
void __iomem *base;
-@@ -408,57 +324,55 @@ static bool scpsys_active_wakeup(struct device *dev)
+@@ -408,57 +324,55 @@ static bool scpsys_active_wakeup(struct
return scpd->data->active_wakeup;
}
@@ -262,7 +260,7 @@ index 837effe19907..722aac80e611 100644
struct scp_domain *scpd = &scp->domains[i];
const struct scp_domain_data *data = &scp_domain_data[i];
-@@ -467,13 +381,15 @@ static int scpsys_probe(struct platform_device *pdev)
+@@ -467,13 +381,15 @@ static int scpsys_probe(struct platform_
if (PTR_ERR(scpd->supply) == -ENODEV)
scpd->supply = NULL;
else
@@ -273,15 +271,15 @@ index 837effe19907..722aac80e611 100644
- pd_data->num_domains = NUM_DOMAINS;
+ pd_data->num_domains = num;
++
++ init_clks(pdev, clk);
- for (i = 0; i < NUM_DOMAINS; i++) {
-+ init_clks(pdev, clk);
-+
+ for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
struct generic_pm_domain *genpd = &scpd->genpd;
const struct scp_domain_data *data = &scp_domain_data[i];
-@@ -482,13 +398,37 @@ static int scpsys_probe(struct platform_device *pdev)
+@@ -482,13 +398,37 @@ static int scpsys_probe(struct platform_
scpd->scp = scp;
scpd->data = data;
@@ -321,7 +319,7 @@ index 837effe19907..722aac80e611 100644
/*
* Initially turn on all domains to make the domains usable
-@@ -507,6 +447,123 @@ static int scpsys_probe(struct platform_device *pdev)
+@@ -507,6 +447,123 @@ static int scpsys_probe(struct platform_
* valid.
*/
@@ -445,7 +443,7 @@ index 837effe19907..722aac80e611 100644
ret =
pm_genpd_add_subdomain(pd_data->domains[MT8173_POWER_DOMAIN_MFG_ASYNC],
pd_data->domains[MT8173_POWER_DOMAIN_MFG_2D]);
if (ret && IS_ENABLED(CONFIG_PM))
-@@ -517,21 +574,36 @@ static int scpsys_probe(struct platform_device *pdev)
+@@ -517,21 +574,36 @@ static int scpsys_probe(struct platform_
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
@@ -486,6 +484,3 @@ index 837effe19907..722aac80e611 100644
static struct platform_driver scpsys_drv = {
.probe = scpsys_probe,
.driver = {
---
-2.11.0
-
diff --git
a/target/linux/mediatek/patches-4.9/0015-soc-mediatek-Add-MT2701-scpsys-driver.patch
b/target/linux/mediatek/patches-4.9/0015-soc-mediatek-Add-MT2701-scpsys-driver.patch
index c56a8a9..5147149 100644
---
a/target/linux/mediatek/patches-4.9/0015-soc-mediatek-Add-MT2701-scpsys-driver.patch
+++
b/target/linux/mediatek/patches-4.9/0015-soc-mediatek-Add-MT2701-scpsys-driver.patch
@@ -17,10 +17,8 @@ Signed-off-by: Matthias Brugger <matthias....@gmail.com>
drivers/soc/mediatek/mtk-scpsys.c | 117 +++++++++++++++++++++++++++++++++++++-
2 files changed, 117 insertions(+), 2 deletions(-)
-Index: linux-4.9.14/drivers/soc/mediatek/Kconfig
-===================================================================
---- linux-4.9.14.orig/drivers/soc/mediatek/Kconfig
-+++ linux-4.9.14/drivers/soc/mediatek/Kconfig
+--- a/drivers/soc/mediatek/Kconfig
++++ b/drivers/soc/mediatek/Kconfig
@@ -23,7 +23,7 @@ config MTK_PMIC_WRAP
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
@@ -30,10 +28,8 @@ Index: linux-4.9.14/drivers/soc/mediatek/Kconfig
select REGMAP
select MTK_INFRACFG
select PM_GENERIC_DOMAINS if PM
-Index: linux-4.9.14/drivers/soc/mediatek/mtk-scpsys.c
-===================================================================
---- linux-4.9.14.orig/drivers/soc/mediatek/mtk-scpsys.c
-+++ linux-4.9.14/drivers/soc/mediatek/mtk-scpsys.c
+--- a/drivers/soc/mediatek/mtk-scpsys.c
++++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -20,6 +20,7 @@
#include <linux/regulator/consumer.h>
#include <linux/soc/mediatek/infracfg.h>
diff --git a/target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch
b/target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch
index cf604f4..19be772 100644
--- a/target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch
+++ b/target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch
@@ -13,10 +13,8 @@ Signed-off-by: John Crispin <j...@phrozen.org>
5 files changed, 279 insertions(+)
create mode 100644 drivers/pwm/pwm-mediatek.c
-Index: linux-4.9.17/drivers/pwm/Kconfig
-===================================================================
---- linux-4.9.17.orig/drivers/pwm/Kconfig
-+++ linux-4.9.17/drivers/pwm/Kconfig
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
@@ -282,6 +282,15 @@ config PWM_MTK_DISP
To compile this driver as a module, choose M here: the module
will be called pwm-mtk-disp.
@@ -33,10 +31,8 @@ Index: linux-4.9.17/drivers/pwm/Kconfig
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
-Index: linux-4.9.17/drivers/pwm/Makefile
-===================================================================
---- linux-4.9.17.orig/drivers/pwm/Makefile
-+++ linux-4.9.17/drivers/pwm/Makefile
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
@@ -45,10 +41,8 @@ Index: linux-4.9.17/drivers/pwm/Makefile
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
-Index: linux-4.9.17/drivers/pwm/pwm-mediatek.c
-===================================================================
--- /dev/null
-+++ linux-4.9.17/drivers/pwm/pwm-mediatek.c
++++ b/drivers/pwm/pwm-mediatek.c
@@ -0,0 +1,230 @@
+/*
+ * Mediatek Pulse Width Modulator driver
diff --git a/target/linux/mediatek/patches-4.9/0083-mfd-led3.patch
b/target/linux/mediatek/patches-4.9/0083-mfd-led3.patch
index a72da69..f743e10 100644
--- a/target/linux/mediatek/patches-4.9/0083-mfd-led3.patch
+++ b/target/linux/mediatek/patches-4.9/0083-mfd-led3.patch
@@ -26,11 +26,9 @@ Signed-off-by: Sean Wang <sean.w...@mediatek.com>
drivers/mfd/mt6397-core.c | 4 ++++
1 file changed, 4 insertions(+)
-diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
-index e14d8b0..8e601c8 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
-@@ -48,6 +48,10 @@
+@@ -48,6 +48,10 @@ static const struct mfd_cell mt6323_devs
.name = "mt6323-regulator",
.of_compatible = "mediatek,mt6323-regulator"
},
diff --git a/target/linux/mediatek/patches-4.9/0085-pmic-led0.patch
b/target/linux/mediatek/patches-4.9/0085-pmic-led0.patch
index 96662dd..dee31cd 100644
--- a/target/linux/mediatek/patches-4.9/0085-pmic-led0.patch
+++ b/target/linux/mediatek/patches-4.9/0085-pmic-led0.patch
@@ -26,9 +26,6 @@ Signed-off-by: Sean Wang <sean.w...@mediatek.com>
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-mt6323.txt
-diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
-new file mode 100644
-index 0000000..ac38472
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
diff --git a/target/linux/mediatek/patches-4.9/0086-pmic-led1.patch
b/target/linux/mediatek/patches-4.9/0086-pmic-led1.patch
index 215b1b0..2edb4ba 100644
--- a/target/linux/mediatek/patches-4.9/0086-pmic-led1.patch
+++ b/target/linux/mediatek/patches-4.9/0086-pmic-led1.patch
@@ -26,11 +26,9 @@ Signed-off-by: Sean Wang <sean.w...@mediatek.com>
Documentation/devicetree/bindings/mfd/mt6397.txt | 1 +
1 file changed, 1 insertion(+)
-diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt
b/Documentation/devicetree/bindings/mfd/mt6397.txt
-index c568d52..522a3bb 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
-@@ -6,6 +6,7 @@ MT6397/MT6323 is a multifunction device with the following sub
modules:
+@@ -6,6 +6,7 @@ MT6397/MT6323 is a multifunction device
- Audio codec
- GPIO
- Clock
diff --git a/target/linux/mediatek/patches-4.9/0087-pmic-led2.patch
b/target/linux/mediatek/patches-4.9/0087-pmic-led2.patch
index f3bc921..f0d706c 100644
--- a/target/linux/mediatek/patches-4.9/0087-pmic-led2.patch
+++ b/target/linux/mediatek/patches-4.9/0087-pmic-led2.patch
@@ -30,10 +30,8 @@ Reviewed-by: Jacek Anaszewski <jacek.anaszew...@gmail.com>
3 files changed, 511 insertions(+)
create mode 100644 drivers/leds/leds-mt6323.c
-Index: linux-4.9.17/drivers/leds/Kconfig
-===================================================================
---- linux-4.9.17.orig/drivers/leds/Kconfig
-+++ linux-4.9.17/drivers/leds/Kconfig
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
@@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
@@ -49,10 +47,8 @@ Index: linux-4.9.17/drivers/leds/Kconfig
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
-Index: linux-4.9.17/drivers/leds/leds-mt6323.c
-===================================================================
--- /dev/null
-+++ linux-4.9.17/drivers/leds/leds-mt6323.c
++++ b/drivers/leds/leds-mt6323.c
@@ -0,0 +1,502 @@
+/*
+ * LED driver for Mediatek MT6323 PMIC
diff --git a/target/linux/mediatek/patches-4.9/0088-pmic-led3.patch
b/target/linux/mediatek/patches-4.9/0088-pmic-led3.patch
index 701dcec..888218b 100644
--- a/target/linux/mediatek/patches-4.9/0088-pmic-led3.patch
+++ b/target/linux/mediatek/patches-4.9/0088-pmic-led3.patch
@@ -28,11 +28,9 @@ Acked-by: Lee Jones <lee.jo...@linaro.org>
drivers/mfd/mt6397-core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
-diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
-index 8e601c8..04a601f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
-@@ -47,8 +47,7 @@
+@@ -47,8 +47,7 @@ static const struct mfd_cell mt6323_devs
{
.name = "mt6323-regulator",
.of_compatible = "mediatek,mt6323-regulator"
diff --git a/target/linux/mediatek/patches-4.9/0091-dsa1.patch
b/target/linux/mediatek/patches-4.9/0091-dsa1.patch
index c9bad93..ffc63dc 100644
--- a/target/linux/mediatek/patches-4.9/0091-dsa1.patch
+++ b/target/linux/mediatek/patches-4.9/0091-dsa1.patch
@@ -27,9 +27,6 @@ Acked-by: Rob Herring <r...@kernel.org>
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt
-diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-new file mode 100644
-index 0000000..a9bc27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -0,0 +1,92 @@
diff --git
a/target/linux/mediatek/patches-4.9/0091-net-next-mediatek-fix-DQL-support.patch
b/target/linux/mediatek/patches-4.9/0091-net-next-mediatek-fix-DQL-support.patch
index 5ae90e3..6e65d27 100644
---
a/target/linux/mediatek/patches-4.9/0091-net-next-mediatek-fix-DQL-support.patch
+++
b/target/linux/mediatek/patches-4.9/0091-net-next-mediatek-fix-DQL-support.patch
@@ -16,10 +16,8 @@ Signed-off-by: John Crispin <j...@phrozen.org>
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 33 ++++++++++++++++-----------
1 file changed, 20 insertions(+), 13 deletions(-)
-Index: linux-4.9.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-===================================================================
---- linux-4.9.14.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ linux-4.9.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -706,7 +706,16 @@ static int mtk_tx_map(struct sk_buff *sk
WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
(!nr_frags * TX_DMA_LS0)));
diff --git a/target/linux/mediatek/patches-4.9/0092-dsa2.patch
b/target/linux/mediatek/patches-4.9/0092-dsa2.patch
index 84e5cb4..a5b4242 100644
--- a/target/linux/mediatek/patches-4.9/0092-dsa2.patch
+++ b/target/linux/mediatek/patches-4.9/0092-dsa2.patch
@@ -36,11 +36,9 @@ Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
6 files changed, 127 insertions(+)
create mode 100644 net/dsa/tag_mtk.c
-diff --git a/include/net/dsa.h b/include/net/dsa.h
-index 4e13e69..3276547 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
-@@ -31,6 +31,7 @@ enum dsa_tag_protocol {
+@@ -27,6 +27,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_BRCM,
DSA_TAG_PROTO_QCA,
@@ -48,31 +46,25 @@ index 4e13e69..3276547 100644
DSA_TAG_LAST, /* MUST BE LAST */
};
-diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
-index 9649238..d78789b 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
-@@ -31,4 +31,6 @@ config NET_DSA_TAG_TRAILER
+@@ -41,4 +41,6 @@ config NET_DSA_TAG_TRAILER
config NET_DSA_TAG_QCA
bool
+config NET_DSA_TAG_MTK
+ bool
endif
-diff --git a/net/dsa/Makefile b/net/dsa/Makefile
-index 31d3437..9b1d478 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
-@@ -8,3 +8,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
+@@ -8,3 +8,4 @@ dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += ta
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
+dsa_core-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
-diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
-index b6d4f6a..617f736 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
-@@ -53,6 +53,9 @@ static struct sk_buff *dsa_slave_notag_xmit(struct sk_buff
*skb,
+@@ -57,6 +57,9 @@ const struct dsa_device_ops *dsa_device_
#ifdef CONFIG_NET_DSA_TAG_QCA
[DSA_TAG_PROTO_QCA] = &qca_netdev_ops,
#endif
@@ -82,11 +74,9 @@ index b6d4f6a..617f736 100644
[DSA_TAG_PROTO_NONE] = &none_ops,
};
-diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
-index 0706a51..2a31399 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
-@@ -85,4 +85,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device
*parent,
+@@ -84,4 +84,7 @@ extern const struct dsa_device_ops brcm_
/* tag_qca.c */
extern const struct dsa_device_ops qca_netdev_ops;
@@ -94,9 +84,6 @@ index 0706a51..2a31399 100644
+extern const struct dsa_device_ops mtk_netdev_ops;
+
#endif
-diff --git a/net/dsa/tag_mtk.c b/net/dsa/tag_mtk.c
-new file mode 100644
-index 0000000..833a9d6
--- /dev/null
+++ b/net/dsa/tag_mtk.c
@@ -0,0 +1,117 @@
diff --git a/target/linux/mediatek/patches-4.9/0092-dsa3.patch
b/target/linux/mediatek/patches-4.9/0092-dsa3.patch
index 7c4dc4f..385add1 100644
--- a/target/linux/mediatek/patches-4.9/0092-dsa3.patch
+++ b/target/linux/mediatek/patches-4.9/0092-dsa3.patch
@@ -33,11 +33,9 @@ Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
2 files changed, 10 insertions(+)
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-index 9e75768..c21ed99 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1846,6 +1846,12 @@ static int mtk_hw_init(struct mtk_eth *eth)
+@@ -1855,6 +1855,12 @@ static int mtk_hw_init(struct mtk_eth *e
/* GE2, Force 1000M/FD, FC ON */
mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1));
@@ -50,8 +48,6 @@ index 9e75768..c21ed99 100644
/* Enable RX VLan Offloading */
mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-index 99b1c8e..996024d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -70,6 +70,10 @@
diff --git a/target/linux/mediatek/patches-4.9/0092-dsa4.patch
b/target/linux/mediatek/patches-4.9/0092-dsa4.patch
index d67b4a9..4daebfb 100644
--- a/target/linux/mediatek/patches-4.9/0092-dsa4.patch
+++ b/target/linux/mediatek/patches-4.9/0092-dsa4.patch
@@ -31,11 +31,9 @@ Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 ++
1 file changed, 2 insertions(+)
-diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-index c21ed99..84b09a4 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2323,6 +2323,8 @@ static int mtk_add_mac(struct mtk_eth *eth, struct
device_node *np)
+@@ -2333,6 +2333,8 @@ static int mtk_add_mac(struct mtk_eth *e
eth->netdev[id]->ethtool_ops = &mtk_ethtool_ops;
eth->netdev[id]->irq = eth->irq[0];
diff --git a/target/linux/mediatek/patches-4.9/0092-dsa5.patch
b/target/linux/mediatek/patches-4.9/0092-dsa5.patch
index 6c10137..63a40d0 100644
--- a/target/linux/mediatek/patches-4.9/0092-dsa5.patch
+++ b/target/linux/mediatek/patches-4.9/0092-dsa5.patch
@@ -49,8 +49,6 @@ Signed-off-by: Landen Chao <landen.c...@mediatek.com>
create mode 100644 drivers/net/dsa/mt7530.c
create mode 100644 drivers/net/dsa/mt7530.h
-diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
-index 0659846..5b322b4 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -34,4 +34,12 @@ config NET_DSA_QCA8K
@@ -66,21 +64,16 @@ index 0659846..5b322b4 100644
+ chip.
+
endmenu
-diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
-index a3c9416..8e629c1 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
-@@ -2,6 +2,6 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o
- bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o
+@@ -1,6 +1,6 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
-
+obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-y += b53/
obj-y += mv88e6xxx/
-diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
-new file mode 100644
-index 0000000..ad2e6f8
--- /dev/null
+++ b/drivers/net/dsa/mt7530.c
@@ -0,0 +1,1126 @@
@@ -1210,9 +1203,6 @@ index 0000000..ad2e6f8
+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mediatek-mt7530");
-diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
-new file mode 100644
-index 0000000..05a612f
--- /dev/null
+++ b/drivers/net/dsa/mt7530.h
@@ -0,0 +1,390 @@
diff --git a/target/linux/mediatek/patches-4.9/0093-dsa-compat.patch
b/target/linux/mediatek/patches-4.9/0093-dsa-compat.patch
index ca36d4c..f69078c 100644
--- a/target/linux/mediatek/patches-4.9/0093-dsa-compat.patch
+++ b/target/linux/mediatek/patches-4.9/0093-dsa-compat.patch
@@ -1,7 +1,5 @@
-Index: linux-4.9.17/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-4.9.17.orig/drivers/net/dsa/mt7530.c
-+++ linux-4.9.17/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -834,6 +834,7 @@ mt7530_port_bridge_join(struct dsa_switc
int i;
@@ -70,10 +68,8 @@ Index: linux-4.9.17/drivers/net/dsa/mt7530.c
}
static void
-Index: linux-4.9.17/drivers/net/dsa/mt7530.h
-===================================================================
---- linux-4.9.17.orig/drivers/net/dsa/mt7530.h
-+++ linux-4.9.17/drivers/net/dsa/mt7530.h
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
@@ -379,6 +379,8 @@ struct mt7530_priv {
struct mt7530_port ports[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
@@ -83,10 +79,8 @@ Index: linux-4.9.17/drivers/net/dsa/mt7530.h
};
struct mt7530_hw_stats {
-Index: linux-4.9.17/net/dsa/tag_mtk.c
-===================================================================
---- linux-4.9.17.orig/net/dsa/tag_mtk.c
-+++ linux-4.9.17/net/dsa/tag_mtk.c
+--- a/net/dsa/tag_mtk.c
++++ b/net/dsa/tag_mtk.c
@@ -35,7 +35,7 @@ static struct sk_buff *mtk_tag_xmit(stru
/* Build the tag after the MAC Source Address */
mtk_tag = skb->data + 2 * ETH_ALEN;
diff --git a/target/linux/mediatek/patches-4.9/0094-net-affinity.patch
b/target/linux/mediatek/patches-4.9/0094-net-affinity.patch
index 8e51bdd..0c468fb 100644
--- a/target/linux/mediatek/patches-4.9/0094-net-affinity.patch
+++ b/target/linux/mediatek/patches-4.9/0094-net-affinity.patch
@@ -1,7 +1,5 @@
-Index: linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-===================================================================
---- linux-4.9.17.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2459,15 +2459,23 @@ static int mtk_probe(struct platform_dev
goto err_deinit_hw;
}
@@ -26,10 +24,8 @@ Index:
linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.c
err = mtk_mdio_init(eth);
if (err)
-Index: linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-===================================================================
---- linux-4.9.17.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ linux-4.9.17/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -539,6 +539,7 @@ struct mtk_eth {
struct net_device *netdev[MTK_MAX_DEVS];
struct mtk_mac *mac[MTK_MAX_DEVS];
diff --git a/target/linux/mediatek/patches-4.9/0095-ephy.patch
b/target/linux/mediatek/patches-4.9/0095-ephy.patch
index 52d8299..dc88ca2 100644
--- a/target/linux/mediatek/patches-4.9/0095-ephy.patch
+++ b/target/linux/mediatek/patches-4.9/0095-ephy.patch
@@ -1,7 +1,5 @@
-Index: linux-4.9.20/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
-+++ linux-4.9.20/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -629,6 +629,11 @@ mt7530_setup(struct dsa_switch *ds)
val = mt7530_read(priv, MT7530_MHWTRAP);
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
@@ -14,10 +12,8 @@ Index: linux-4.9.20/drivers/net/dsa/mt7530.c
mt7530_write(priv, MT7530_MHWTRAP, val);
/* Enable and reset MIB counters */
-Index: linux-4.9.20/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-===================================================================
---- linux-4.9.20.orig/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ linux-4.9.20/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -221,6 +221,9 @@ static void mtk_phy_link_adjust(struct n
netif_carrier_on(dev);
else
diff --git a/target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch
b/target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch
index 2a562e1..1a74e63 100644
--- a/target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch
+++ b/target/linux/mediatek/patches-4.9/0096-dsa-multi-cpu.patch
@@ -1,7 +1,5 @@
-Index: linux-4.9.20/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
-+++ linux-4.9.20/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -996,15 +996,7 @@ err:
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds)
@@ -19,10 +17,8 @@ Index: linux-4.9.20/drivers/net/dsa/mt7530.c
}
static struct dsa_switch_ops mt7530_switch_ops = {
-Index: linux-4.9.20/include/net/dsa.h
-===================================================================
---- linux-4.9.20.orig/include/net/dsa.h
-+++ linux-4.9.20/include/net/dsa.h
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
@@ -145,6 +145,8 @@ struct dsa_port {
struct device_node *dn;
unsigned int ageing_time;
@@ -72,10 +68,8 @@ Index: linux-4.9.20/include/net/dsa.h
struct switchdev_trans;
struct switchdev_obj;
struct switchdev_obj_port_fdb;
-Index: linux-4.9.20/net/dsa/dsa2.c
-===================================================================
---- linux-4.9.20.orig/net/dsa/dsa2.c
-+++ linux-4.9.20/net/dsa/dsa2.c
+--- a/net/dsa/dsa2.c
++++ b/net/dsa/dsa2.c
@@ -248,8 +248,6 @@ static int dsa_cpu_port_apply(struct dev
return err;
}
@@ -151,10 +145,8 @@ Index: linux-4.9.20/net/dsa/dsa2.c
}
pr_info("DSA: switch %d %d parsed\n", dst->tree, ds->index);
-Index: linux-4.9.20/net/dsa/dsa_priv.h
-===================================================================
---- linux-4.9.20.orig/net/dsa/dsa_priv.h
-+++ linux-4.9.20/net/dsa/dsa_priv.h
+--- a/net/dsa/dsa_priv.h
++++ b/net/dsa/dsa_priv.h
@@ -43,6 +43,7 @@ struct dsa_slave_priv {
int old_duplex;
@@ -163,10 +155,8 @@ Index: linux-4.9.20/net/dsa/dsa_priv.h
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *netpoll;
#endif
-Index: linux-4.9.20/net/dsa/slave.c
-===================================================================
---- linux-4.9.20.orig/net/dsa/slave.c
-+++ linux-4.9.20/net/dsa/slave.c
+--- a/net/dsa/slave.c
++++ b/net/dsa/slave.c
@@ -61,7 +61,7 @@ static int dsa_slave_get_iflink(const st
{
struct dsa_slave_priv *p = netdev_priv(dev);
diff --git a/target/linux/mediatek/patches-4.9/0097-dsa-mt7530.patch
b/target/linux/mediatek/patches-4.9/0097-dsa-mt7530.patch
index 9f785dd..26eff60 100644
--- a/target/linux/mediatek/patches-4.9/0097-dsa-mt7530.patch
+++ b/target/linux/mediatek/patches-4.9/0097-dsa-mt7530.patch
@@ -1,7 +1,5 @@
-Index: linux-4.9.20/drivers/net/dsa/mt7530.c
-===================================================================
---- linux-4.9.20.orig/drivers/net/dsa/mt7530.c
-+++ linux-4.9.20/drivers/net/dsa/mt7530.c
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
@@ -627,7 +627,7 @@ mt7530_setup(struct dsa_switch *ds)
/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
diff --git a/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
b/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
deleted file mode 100644
index aa55fd9..0000000
--- a/target/linux/ramips/patches-4.9/200-rt3883-fix-pinctrl-typo.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 2583143af8111d430bdca0268b6cdb7ccc7c3f9d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <dan...@makrotopia.org>
-Date: Fri, 13 Jan 2017 05:40:04 +0100
-Subject: [PATCH] mips: ralink/rt3883: fix typo in pinctrl lna_g_func
-
-Signed-off-by: Daniel Golle <dan...@makrotopia.org>
----
- arch/mips/ralink/rt3883.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f
- static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
- static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
- static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
--static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
-+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
- static struct rt2880_pmx_func pci_func[] = {
- FUNC("pci-dev", 0, 40, 32),
- FUNC("pci-host2", 1, 40, 32),
--
2.7.4
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
