The script can be used to quickly spin up QEMU virtual machines with lan
and wan network. Please read the initial part of the script for
instructions about how to configure host machine
Signed-off-by: Yousong Zhou <yszhou4t...@gmail.com>
---
scripts/qemustart | 287 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 287 insertions(+)
create mode 100755 scripts/qemustart
diff --git a/scripts/qemustart b/scripts/qemustart
new file mode 100755
index 0000000000..f8e34e325f
--- /dev/null
+++ b/scripts/qemustart
@@ -0,0 +1,287 @@
+#!/usr/bin/env bash
+
+SELF="$0"
+
+# Linux bridge for connecting lan and wan network of guest machines
+BR_LAN="${BR_LAN:-br-lan}"
+BR_WAN="${BR_WAN:-br-wan}"
+
+# Host network interface providing internet access for guest machines
+IF_INET="${IF_INET:-eth0}"
+
+# qemu-bridge-helper does two things here
+#
+# - create tap interface
+# - add the tap interface to bridge
+#
+# as such it requires CAP_NET_ADMIN to do its job. It will be convenient to
+# have it as a root setuid program. Be aware of the security risks implied
+#
+# the helper has an acl list which defaults to deny all bridge. we need to add
+# $BR_LAN and $BR_WAN to its allow list
+#
+# # sudo vim /etc/qemu/bridge.conf
+# allow br-lan
+# allow br-wan
+#
+# Other allowed directives can be 'allow all', 'deny all', 'include xxx', See
+# qemu-bridge-helper.c of qemu source code for details.
+#
+# The helper can be provided by package qemu-system-common on debian, or
+# qemu-kvm-common on rhel
+#
+HELPER="${HELPER:-/usr/libexec/qemu-bridge-helper}"
+
+### end of global settings
+
+__errmsg() {
+ echo "$*" >&2
+}
+
+do_setup() {
+ # setup bridge for LAN network
+ sudo ip link add dev "$BR_LAN" type bridge
+ sudo ip link set dev "$BR_LAN" up
+ sudo ip addr add 192.168.1.3/24 dev "$BR_LAN"
+
+ # setup bridge for WAN network
+ #
+ # minimal dnsmasq config for configuring guest wan network with dhcp
+ #
+ # # sudo apt-get install dnsmasq
+ # # sudo vi /etc/dnsmasq.conf
+ # interface=br-wan
+ # dhcp-range=192.168.7.50,192.168.7.150,255.255.255.0,30m
+ #
+ sudo ip link add dev "$BR_WAN" type bridge
+ sudo ip link set dev "$BR_WAN" up
+ sudo ip addr add 192.168.7.1/24 dev "$BR_WAN"
+
+ # guest internet access
+ sudo sysctl -w "net.ipv4.ip_forward=1"
+ sudo sysctl -w "net.ipv4.conf.$BR_WAN.proxy_arp=1"
+ while sudo iptables -t nat -D POSTROUTING -o "$IF_INET" -j MASQUERADE
2>/dev/null; do true; done
+ sudo iptables -t nat -A POSTROUTING -o "$IF_INET" -j MASQUERADE
+}
+
+check_setup_() {
+ ip link show "$BR_LAN" >/dev/null || return 1
+ ip link show "$BR_WAN" >/dev/null || return 1
+ [ -x "$HELPER" ] || {
+ __errmsg "helper $HELPER is not an executable"
+ return 1
+ }
+}
+
+check_setup() {
+ check_setup_ || {
+ __errmsg "please check the script content to see the
environment requirement"
+ return 1
+ }
+}
+#do_setup; check_setup; exit $?
+
+usage() {
+ cat >&2 <<EOF
+Usage: $SELF [-h|--help]
+ $SELF <target>
+ [<subtarget> [<extra-qemu-options>]]
+ [--kernel <kernel>]
+ [--rootfs <rootfs>]
+
+<subtarget> will default to "generic" and must be specified if
+<extra-qemu-options> are present
+
+e.g. <subtarget> for malta can be le, be, le64, be64, le-glibc, le64-glibc, etc
+
+<kernel>, <rootfs> can be required or optional arguments to qemu depending on
+the actual <target> in use. They will default to files under bin/targets/
+
+Examples
+
+ $SELF x86 64
+ $SELF x86 64 -enable-kvm
+ $SELF x86 64 -incoming tcp:0:4444
+ $SELF x86 64-glibc
+ $SELF malta be -m 64
+ $SELF malta le64
+ $SELF malta be-glibc
+ $SELF armvirt 32 \\
+ --kernel bin/targets/armvirt/32/lede-armvirt-32-zImage \\
+ --rootfs bin/targets/armvirt/32/lede-armvirt-32-root.ext4
+EOF
+}
+
+rand_mac() {
+ hexdump -n 3 -e '"52:54:00:" 2/1 "%02x:" 1/1 "%02x"' /dev/urandom
+}
+
+parse_args() {
+ while [ "$#" -gt 0 ]; do
+ case "$1" in
+ --kernel)
+ o_kernel="$2"; shift 2
+ ;;
+ --rootfs)
+ o_rootfs="$2"
+ shift 2
+ ;;
+ --help|-h)
+ usage
+ exit 0
+ ;;
+ *)
+ if [ -z "$o_target" ]; then
+ o_target="$1"
+ elif [ -z "$o_subtarget" ]; then
+ o_subtarget="$1"
+ else
+ o_qemu_extra=("${o_qemu_extra[@]}" "$1")
+ fi
+ shift
+ ;;
+ esac
+ done
+
+ MAC_LAN="$(rand_mac)"
+ MAC_WAN="$(rand_mac)"
+ [ -n "$o_target" ] || {
+ usage
+ return 1
+ }
+ [ -n "$o_subtarget" ] || o_subtarget="generic"
+ o_bindir="bin/targets/$o_target/$o_subtarget"
+}
+
+start_qemu_armvirt() {
+ local kernel="$o_kernel"
+ local rootfs="$o_rootfs"
+ local cpu
+ local qemu_exe
+
+ case "${o_subtarget%-*}" in
+ 32)
+ qemu_exe="qemu-system-arm"
+ cpu="cortex-a15"
+ [ -n "$kernel" ] ||
kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-zImage-initramfs"
+ ;;
+ 64)
+ qemu_exe="qemu-system-aarch64"
+ cpu="cortex-a57"
+ [ -n "$kernel" ] ||
kernel="$o_bindir/lede-$o_target-${o_subtarget%-*}-Image-initramfs"
+ ;;
+ *)
+ __errmsg "target $o_target: unknown subtarget
$o_subtarget"
+ return 1
+ ;;
+ esac
+ [ -z "$rootfs" ] || {
+ if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
+ gunzip "$rootfs.gz"
+ fi
+ o_qemu_extra=( \
+ "-drive" "file=$rootfs,format=raw,if=virtio" \
+ "-append" "root=/dev/vda rootwait" \
+ "${o_qemu_extra[@]}" \
+ )
+ }
+
+ "$qemu_exe" -machine virt -cpu "$cpu" -nographic \
+ -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device
virtio-net-pci,id=devlan,netdev=lan,mac="$MAC_LAN" \
+ -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device
virtio-net-pci,id=devwan,netdev=wan,mac="$MAC_WAN" \
+ -kernel "$kernel" \
+ "${o_qemu_extra[@]}"
+}
+
+start_qemu_malta() {
+ local is64
+ local isel
+ local qemu_exe
+ local kernel="$o_kernel"
+
+ # o_subtarget can be le, be, le64, be64, le-glibc, le64-glibc, etc..
+ is64="$(echo $o_subtarget | grep -o 64)"
+ [ "$(echo "$o_subtarget" | grep -o '^..')" = "le" ] && isel="el"
+ qemu_exe="qemu-system-mips$is64$isel"
+
+ [ -n "$kernel" ] ||
kernel="$o_bindir/lede-malta-${o_subtarget%-*}-vmlinux-initramfs.elf"
+
+ # NOTE: order of wan, lan -device arguments matters as it will affect
which
+ # one will be actually used as the wan, lan network interface inside the
+ # guest machine
+ "$qemu_exe" -machine malta -nographic \
+ -netdev bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device
pcnet,netdev=wan,mac="$MAC_WAN" \
+ -netdev bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device
pcnet,netdev=lan,mac="$MAC_LAN" \
+ -kernel "$kernel" \
+ "${o_qemu_extra[@]}"
+}
+
+start_qemu_x86() {
+ local rootfs="$o_rootfs"
+ local qemu_exe
+
+ [ -n "$rootfs" ] || {
+
rootfs="$o_bindir/lede-$o_target-${o_subtarget%-*}-combined-ext4.img"
+ if [ ! -f "$rootfs" -a -s "$rootfs.gz" ]; then
+ gunzip "$rootfs.gz"
+ fi
+ }
+ #
+ # generic: 32-bit, pentium4 (CONFIG_MPENTIUM4), kvm guest, virtio
+ # legacy: 32-bit, i486 (CONFIG_M486)
+ # 64: 64-bit, kvm guest, virtio
+ #
+ case "${o_subtarget%-*}" in
+ legacy) qemu_exe="qemu-system-i386"
;;
+ generic|64) qemu_exe="qemu-system-x86_64" ;;
+ *)
+ __errmsg "target $o_target: unknown subtarget
$o_subtarget"
+ return 1
+ ;;
+ esac
+
+ case "${o_subtarget%-*}" in
+ legacy)
+ # use IDE (PATA) disk instead of AHCI (SATA). Refer to
link
+ # [1] for related discussions
+ #
+ # To use AHCI interface
+ #
+ # -device ich9-ahci,id=ahci \
+ # -device ide-drive,drive=drv0,bus=ahci.0 \
+ # -drive
"file=$rootfs,format=raw,id=drv0,if=none" \
+ #
+ # [1] https://dev.openwrt.org/ticket/17947
+ "$qemu_exe" -nographic \
+ -netdev
bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device
e1000,id=devlan,netdev=lan,mac="$MAC_LAN" \
+ -netdev
bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device
e1000,id=devwan,netdev=wan,mac="$MAC_WAN" \
+ -device ide-drive,drive=drv0 \
+ -drive
"file=$rootfs,format=raw,id=drv0,if=none" \
+ "${o_qemu_extra[@]}"
+ ;;
+ generic|64)
+ "$qemu_exe" -nographic \
+ -netdev
bridge,id=lan,br="$BR_LAN,helper=$HELPER" -device
virtio-net-pci,id=devlan,netdev=lan,mac="$MAC_LAN" \
+ -netdev
bridge,id=wan,br="$BR_WAN,helper=$HELPER" -device
virtio-net-pci,id=devwan,netdev=wan,mac="$MAC_WAN" \
+ -drive "file=$rootfs,format=raw,if=virtio" \
+ -device virtio-balloon-pci \
+ "${o_qemu_extra[@]}"
+ ;;
+ esac
+}
+
+start_qemu() {
+ case "$o_target" in
+ armvirt) start_qemu_armvirt ;;
+ malta) start_qemu_malta ;;
+ x86) start_qemu_x86 ;;
+ *)
+ __errmsg "target $o_target is not supported yet"
+ return 1
+ ;;
+ esac
+}
+
+check_setup \
+ && parse_args "$@" \
+ && start_qemu
--
2.12.2
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
