I am able to test this on my DIR-860l. I could try to compile my own build to test this, but I am no C programmer myself. Am I correct in the following post about how to set the flag to allow for jumbo frames to be set?: https://forum.lede-project.org/t/build-for-the-d-link-dir-860l/948/40?u=mushoz If so, I will be able to apply the patch myself and test it. I could then send a PR if the tests are successful.
Yours sincerely, Jaap Buurman On Mon, Apr 10, 2017 at 9:16 AM, Milan Kočvara <milankocv...@gmail.com> wrote: > Hello all, > if someone do a testing patch for jumboFrames, I can lend a helping > hand with testing on EdgeRouter X. I think MT7621 know JumboFrames, > because of Ubiquiti FMW allow to set MTU 1536B > > 2017-04-10 2:06 GMT+02:00 <ros...@gmail.com>: >> Probably was not in the interest of the driver writers. Based on the >> copyrights though, it's mostly LEDE/OpenWRT developers. Try modifying >> the code to test if jumbo frames work. >> >> On Sun, 2017-04-09 at 21:20 +0200, Jaap Buurman wrote: >>> Hello all, >>> >>> I found the message below in a conversation from back in August, 2016 >>> in this mailinglist. I did not find a reply to this question. Has >>> there ever been one? Or does anyone else happen to know the answer to >>> this question? Thank you very much in advance. >>> >>> Yours sincerely, >>> >>> Jaap Buurman >>> >>> August, 2016 message: >>> >>> >>> Hi all, >>> >>> in the MT7621 ethernet driver code >>> (drivers/net/ethernet/mediatek/soc_mt7621.c) the FE_FLAG_JUMBO_FRAME >>> flag is not during the device initialization. This prevents the user >>> to set an MTU greater than 1500. Is this correct? Does MT7621 support >>> jumbo frames? >>> >>> Thanks. >>> >> >> _______________________________________________ >> Lede-dev mailing list >> Lede-dev@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/lede-dev _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
