Hello Piotr, On 25/03/2017 23:12:58 CET, Piotr Dymacz wrote: > Hello Vittorio, > > On 25.03.2017 18:08, Vittorio Gambaletta (VittGam) wrote: >> This router has the same hardware of TP-LINK TL-WR841N v11 (same >> FCC ID, same TFTP image name...). >> >> The stock firmware web interface does not seem to accept the LEDE >> factory image, but it can be flashed via the u-boot TFTP recovery >> by long-pressing the reset button after power on. > > Did you try factory image but with changed filename (sometimes TP-Link > web gui doesn't accept files with long name)?
Yes, I remembered about this problem with late versions of the 703n, so I tried both short name (x.bin) and same name of factory image. But it didn't work in either case. Fortunately the TFTP client integrated in the factory u-boot accepts the image, so opening the router to access the serial is not required. > What kind of error are you getting with LEDE factory image? If I remember well it was 18005, wrong filename... > BTW. It seems that TP-Link already released v13 version of this device > in Europe but this time it's (surprise!) MediaTek (MT7628?) based. Yes. But here in Italy, a big online retailer just started selling v12 (with new TP-LINK logo) instead of v11, so who knows when v13 will arrive... (I hope v13 will not have problems, since the 841 v9/v11/v12 today is a very stable and reliable (and really cheap...) platform.) >> The TFTP image name is wr841nv11_tp_recovery.bin (yes, v11, not v12). >> >> Signed-off-by: Vittorio Gambaletta <open...@vittgam.net> >> --- >> target/linux/ar71xx/image/tp-link.mk | 13 ++++++++++++- >> 1 file changed, 12 insertions(+), 1 deletion(-) >> >> diff --git a/target/linux/ar71xx/image/tp-link.mk >> b/target/linux/ar71xx/image/tp-link.mk >> index cf2e5e7..705e400 100644 >> --- a/target/linux/ar71xx/image/tp-link.mk >> +++ b/target/linux/ar71xx/image/tp-link.mk >> @@ -736,6 +736,17 @@ define Device/tl-wr841-v11 >> IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU >> endef >> >> +define Device/tl-wr841-v12 >> + $(Device/tplink-4mlzma) > > Can you use here $(Device/tl-wr841-v11) instead and then overwrite only > two variables which are different: DEVICE_TITLE and TPLINK_HWID? Ok, I will send a PATCH v2 with this change. Cheers, Vittorio > -- > Best regards, > Piotr Dymacz > >> + DEVICE_TITLE := TP-LINK TL-WR841N/ND v12 >> + BOARDNAME := TL-WR841N-v11 >> + DEVICE_PROFILE := TLWR841 >> + TPLINK_HWID := 0x08410012 >> + IMAGES += factory-us.bin factory-eu.bin >> + IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US >> + IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU >> +endef >> + >> define Device/tl-wr842n-v1 >> $(Device/tplink-8m) >> DEVICE_TITLE := TP-LINK TL-WR842N/ND v1 >> @@ -778,7 +789,7 @@ define Device/tl-wr847n-v8 >> DEVICE_PROFILE := TLWR841 >> TPLINK_HWID := 0x08470008 >> endef >> -TARGET_DEVICES += tl-wr840n-v2 tl-wr840n-v3 tl-wr841-v1.5 tl-wr841-v3 >> tl-wr841-v5 tl-wr841-v7 tl-wr841-v8 tl-wr841-v9 tl-wr841-v10 tl-wr841-v11 >> tl-wr842n-v1 tl-wr842n-v2 tl-wr842n-v3 tl-wr843nd-v1 tl-wr847n-v8 >> +TARGET_DEVICES += tl-wr840n-v2 tl-wr840n-v3 tl-wr841-v1.5 tl-wr841-v3 >> tl-wr841-v5 tl-wr841-v7 tl-wr841-v8 tl-wr841-v9 tl-wr841-v10 tl-wr841-v11 >> tl-wr841-v12 tl-wr842n-v1 tl-wr842n-v2 tl-wr842n-v3 tl-wr843nd-v1 >> tl-wr847n-v8 >> >> define Device/tl-wr941nd-v2 >> $(Device/tplink-4m) >> >> _______________________________________________ >> Lede-dev mailing list >> Lede-dev@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/lede-dev >> > > > _______________________________________________ > Lede-dev mailing list > Lede-dev@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/lede-dev _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
