* The left most mini-PCIe slot (the one attached to SIM2) can be
power-cycled by setting GPIO 0 to high/low.
* The D240 only needs the MT76x2 module, so update makefile to reflect this.
Note that until the default mt7620 target is updated, then kmod-mt76 (and thus
kmod-mt7603) will be selected by default.
v1->v2:
* Rename gpio and remove redundant comment (thanks Piotr Dymacz)
Signed-off-by: Kristian Evensen <kristian.even...@gmail.com>
---
target/linux/ramips/dts/D240.dts | 11 +++++++++++
target/linux/ramips/image/mt7620.mk | 2 +-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/target/linux/ramips/dts/D240.dts b/target/linux/ramips/dts/D240.dts
index ef45d38..dbf061c 100644
--- a/target/linux/ramips/dts/D240.dts
+++ b/target/linux/ramips/dts/D240.dts
@@ -46,6 +46,17 @@
bootargs = "console=ttyS0,115200";
};
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_mpcie2 {
+ gpio-export,name = "power_mpcie2";
+ gpio-export,output = <GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
gpio-leds {
compatible = "gpio-leds";
diff --git a/target/linux/ramips/image/mt7620.mk
b/target/linux/ramips/image/mt7620.mk
index 4a76ab3..0410a9a 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -471,6 +471,6 @@ define Device/d240
DTS := D240
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Sanlinking Technologies D240
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76-core kmod-mt76x2
kmod-sdhci-mt7620
endef
TARGET_DEVICES += d240
--
2.9.3
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
