--- Begin Message ---
Known issues:
- Unable to detect 53115 switch attached to MDIO. Not supported
- No support for the cable port
More info on the device and the research can be found at:
http://www.actiontec.com/212.html
Same FCC ID as:
https://wikidevi.com/wiki/Actiontec_V1000H_(Telus)
Signed-off-by: Anthony Sepa <anthonys...@yahoo.ca>
---
.../linux/brcm63xx/base-files/etc/board.d/01_leds | 3 +
.../brcm63xx/base-files/etc/board.d/02_network | 1 +
target/linux/brcm63xx/base-files/etc/diag.sh | 3 +
.../base-files/etc/uci-defaults/09_fix_crc | 1 +
target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 +
target/linux/brcm63xx/dts/r1000h.dts | 93 ++++++++++++++++++++++
target/linux/brcm63xx/image/bcm63xx.mk | 16 ++++
.../brcm63xx/patches-4.4/578-board_R1000H.patch | 50 ++++++++++++
8 files changed, 170 insertions(+)
create mode 100644 target/linux/brcm63xx/dts/r1000h.dts
create mode 100644 target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds
b/target/linux/brcm63xx/base-files/etc/board.d/01_leds
index 7d208cc..347de56 100755
--- a/target/linux/brcm63xx/base-files/etc/board.d/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/board.d/01_leds
@@ -66,6 +66,9 @@ livebox1)
ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
;;
+r1000h)
+ ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1"
"usb2-port1"
+ ;;
r5010un_v2)
ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network
b/target/linux/brcm63xx/base-files/etc/board.d/02_network
index ff5fc7a..d618ce3 100755
--- a/target/linux/brcm63xx/base-files/etc/board.d/02_network
+++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network
@@ -12,6 +12,7 @@ case "$(brcm63xx_board_name)" in
cvg834g |\
evg2000 |\
+r1000h |\
rta770bw |\
rta770w |\
spw303v |\
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh
b/target/linux/brcm63xx/base-files/etc/diag.sh
index df1d616..3775691 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -114,6 +114,9 @@ set_state() {
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
+ r1000h)
+ status_led="R1000H:green:power"
+ ;;
r5010un_v2)
status_led="R5010UNv2:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
index 650db9d..57bf6e2 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -25,6 +25,7 @@ case "$(brcm63xx_board_name)" in
hg622 |\
magic |\
p870hw-51a_v2 |\
+ r1000h |\
r5010un_v2 |\
rta770bw |\
rta770w |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index bceba8f..2d76b65 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -21,6 +21,9 @@ brcm63xx_dt_detect() {
"ADB P.DG AV4202N")
board_name="av4202n"
;;
+ "Actiontec R1000H")
+ board_name="r1000h"
+ ;;
"Alcatel RG100A")
board_name="rg100a"
;;
diff --git a/target/linux/brcm63xx/dts/r1000h.dts
b/target/linux/brcm63xx/dts/r1000h.dts
new file mode 100644
index 0000000..adb827f
--- /dev/null
+++ b/target/linux/brcm63xx/dts/r1000h.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Actiontec R1000H";
+ compatible = "actiontec,r1000h", "brcm,bcm6368";
+
+ chosen {
+ bootargs = "root=/dev/mtdblock2 rootfstype=squashfs noinitrd
console=ttyS0,115200";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 1>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 3 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ inet_green {
+ label = "R1000H:green:inet";
+ gpios = <&gpio0 5 0>;
+ };
+
+ usb_green {
+ label = "R1000H:green:usb";
+ gpios = <&gpio0 21 1>;
+ };
+
+ power_green {
+ label = "R1000H:green:power";
+ gpios = <&gpio0 22 0>;
+ default-state = "on";
+ };
+
+ wps_green {
+ label = "R1000H:green:wps";
+ gpios = <&gpio0 23 1>;
+ };
+
+ power_red {
+ label = "R1000H:red:power";
+ gpios = <&gpio0 24 0>;
+ };
+
+ wps_red {
+ label = "R1000H:red:wps";
+ gpios = <&gpio0 30 1>;
+ };
+
+ inet_red {
+ label = "R1000H:red:inet";
+ gpios = <&gpio0 31 0>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ CFE@0 {
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ linux@20000 {
+ reg = <0x020000 0x1fc0000>;
+ };
+
+ nvram@1fe0000 {
+ reg = <0x1fe0000 0x20000>;
+ };
+};
diff --git a/target/linux/brcm63xx/image/bcm63xx.mk
b/target/linux/brcm63xx/image/bcm63xx.mk
index 0749c29..8e280ea 100644
--- a/target/linux/brcm63xx/image/bcm63xx.mk
+++ b/target/linux/brcm63xx/image/bcm63xx.mk
@@ -1,3 +1,4 @@
+
#
# BCM33XX/BCM63XX Profiles
#
@@ -174,6 +175,21 @@ define Device/96368MVWG-generic
endef
TARGET_DEVICES += 96368MVWG-generic
+### Actiontec ###
+define Device/R1000H
+ $(Device/bcm63xx)
+ FILESYSTEMS := squashfs
+ DEVICE_TITLE := Actiontec R1000H
+ DEVICE_DTS := r1000h
+ CFE_BOARD_ID := 96368MVWG
+ CFE_CHIP_ID := 6368
+ FLASH_MB := 32
+ IMAGE_OFFSET := 0x20000
+ DEVICE_PACKAGES := \
+ $(USB2_PACKAGES) $(BRCMWL_PACKAGES)
+endef
+TARGET_DEVICES += R1000H
+
### ADB ###
define Device/A4001N
$(Device/bcm63xx)
diff --git a/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
b/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
new file mode 100644
index 0000000..d68a6f3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch
@@ -0,0 +1,50 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2203,6 +2203,31 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_R1000H = {
++ .name = "R1000H",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_uart1 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [5] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+ .name = "96368M-1541N",
+ .expected_cpu_id = 0x6368,
+@@ -2701,6 +2726,7 @@ static const struct board_info __initcon
+ &board_HG622,
+ &board_HG655b,
+ &board_P870HW51A_V2,
++ &board_R1000H,
+ &board_VH4032N,
+ &board_VR3025u,
+ &board_VR3025un,
+@@ -2802,6 +2828,7 @@ static struct of_device_id const bcm963x
+ { .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
++ { .compatible = "actiontec,r1000h", .data = &board_R1000H, },
+ { .compatible = "adb,av4202n", .data = &board_AV4202N, },
+ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
--
2.7.4
--- End Message ---
