hi people, i have a witi routerboard from mqmaker, yesterday i've managed to install lede, and start to study it.

i know it has a lot of problem, then how i can track it and report?


the first problemi is that the reboot command doesn't work as aspected


BusyBox v1.25.1 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___| lede-project.org
 \        \   DE /
\ LE \ / -----------------------------------------------------------
   \  DE    \  /    Reboot (17.01.0-rc1, r3042-ec095b5)
    \________\/ -----------------------------------------------------------

root@lede:/#
root@lede:/# reboot
root@lede:/# [38735.890000] br-lan: port 2(wlan0) entered disabled state
[38735.900000] br-lan: port 3(wlan1) entered disabled state
[38735.910000] br-lan: port 1(eth0.1) entered disabled state
[38735.930000] device eth0.1 left promiscuous mode
[38735.940000] br-lan: port 1(eth0.1) entered disabled state
[38735.950000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[38736.040000] device wlan0 left promiscuous mode
[38736.040000] br-lan: port 2(wlan0) entered disabled state
[38736.060000] device wlan1 left promiscuous mode
[38736.070000] br-lan: port 3(wlan1) entered disabled state
[38736.280000] device eth0 left promiscuous mode
[38740.620000] reboot: Restarting system

it hangs here , and i must cycle the power off and on


second problem, the second wan port doesn't work , someone may tell me the state of the art about it?


this night i've tried to switch the wifi 5 ghz channel and not all channel works (it seems do not change the channel or switch off the radio, how i can increse the log level about the wifi process??

setting channel from 36 to 48 , the frequency seems to be the same, and if i set to channel 52 it disappears


root@lede:/# iw dev wlan0 info
Interface wlan0
        ifindex 12
        wdev 0x4
        addr 00:00:99:c6:58:fb
        type AP
        wiphy 0
        channel 52 (5260 MHz), width: 80 MHz, center1: 5290 MHz
        txpower 14.00 dBm


thanks


_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev

Reply via email to