The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.
The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device
Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
This patch should probably also be backported to the 17.01 branch
target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index fa52dd59ec..1c6b0663fa 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -129,7 +129,7 @@ case "$FIRMWARE" in
;;
BTHOMEHUBV3A)
ath9k_eeprom_extract "art-copy" 0 1
- ath9k_patch_fw_mac_crc $(macaddr_add
$(mtd_get_mac_ascii uboot-env ethaddr) +2) 268
+ ath9k_patch_fw_mac_crc $(macaddr_add
$(mtd_get_mac_ascii uboot_env ethaddr) +2) 268
;;
BTHOMEHUBV5A)
ath9k_ubi_eeprom_extract "caldata" 4096 0
--
2.11.1
--- End Message ---
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
