This proposed patch applies to BT Home Hub 5 Type A and:
1) it includes configuration for the Red Ethernet port as an additional
"dmz" interface (feature request FS#490)
2) it fixes FS#390 providing the ability to associate port 5 to the main
switch VLAN.
Signed-off-by: Mauro Mozzarelli <open...@ezplanet.net>
---
diff --git a/package/base-files/files/lib/functions/uci-defaults.sh
b/package/base-files/files/lib/functions/uci-defaults.sh
index f4c1d96..b6dd1f6 100755
--- a/package/base-files/files/lib/functions/uci-defaults.sh
+++ b/package/base-files/files/lib/functions/uci-defaults.sh
@@ -71,6 +71,12 @@ ucidef_set_interface_lan() {
json_select ..
}
+ucidef_set_interface_dmz() {
+ json_select_object network
+ _ucidef_set_interface dmz "$@"
+ json_select ..
+}
+
ucidef_set_interface_wan() {
json_select_object network
_ucidef_set_interface wan "$@"
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network
b/target/linux/lantiq/base-files/etc/board.d/02_network
index bc61a73..00279d5 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -15,6 +15,7 @@ annex="a"
encaps="llc"
payload="bridged"
lan_mac=""
+dmz_mac=""
wan_mac=""
interface_wan=""
@@ -77,8 +78,10 @@ BTHOMEHUBV3A)
BTHOMEHUBV5A)
lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
wan_mac=$(macaddr_add "$lan_mac" 1)
+ dmz_mac=$(macaddr_add "$wan_mac" 3)
ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:dmz" "6t@eth0"
+ ucidef_set_interface_dmz "eth0.2"
;;
DGN3500*)
@@ -180,6 +183,7 @@ ucidef_set_interface_wan "$interface_wan" "pppoe"
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+[ -n "$dmz_mac" ] && ucidef_set_interface_macaddr "dmz" "$dmz_mac"
board_config_flush
diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
index 7f19e52..59b6cee 100644
--- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
+++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts
@@ -244,15 +244,6 @@
phy-mode = "gmii";
phy-handle = <&phy13>;
};
- };
-
- wan: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- lantiq,wan;
-
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
