Support Abicom International Scorpion SC1750 Board
QCA9550 700MHz Extended Temperature Range
256MB DDR2
256MB Nand Flash
16MB Nor Flash
1x SFP, 1x PCIe
2x 10/100/1000 Ethernet
135x100 mm
802.11ng/g/b
802.11ac/an/a
Signed-off-by: Conor O'Gorman <i...@conorogorman.net>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-sc1750.c | 145 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/generic.mk | 10 ++
10 files changed, 175 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 898af5e..c24487e 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -437,6 +437,7 @@ re450)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g"
"phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
;;
+sc1750|\
sc450)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index 695f0a1..324387a 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -44,6 +44,7 @@ get_status_led() {
mr12|\
mr16|\
nbg6616|\
+ sc1750|\
sc450|\
tl-wpa8630)
status_led="$board:green:power"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a15aab9..8072f65 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -881,6 +881,9 @@ ar71xx_board_detect() {
*RW2458N)
name="rw2458n"
;;
+ *SC1750)
+ name="sc1750"
+ ;;
*SC300M)
name="sc300m"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 690f5f2..5642d3b 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -226,6 +226,7 @@ platform_check_image() {
rocket-m-xw|\
rocket-m|\
rw2458n|\
+ sc1750|\
sc300m|\
sc450|\
sr3200|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index bdd2179..b67f559 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -147,6 +147,7 @@ CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RE450=y
CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SC1750=y
CONFIG_ATH79_MACH_SC300M=y
CONFIG_ATH79_MACH_SC450=y
CONFIG_ATH79_MACH_SMART_300=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 4383b9b..7da8d4e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -42,6 +42,17 @@ config ATH79_MACH_TUBE2H
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_SC1750
+ bool "Abicom SC1750 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_SC300M
bool "Abicom SC300M board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index ae0e007..fc6ea50 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -151,6 +151,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) +=
mach-rb95x.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o
obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o
obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
new file mode 100644
index 0000000..653d642
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
@@ -0,0 +1,145 @@
+/*
+ * Abicom International Scorpion SC1750 support.
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juh...@openwrt.org>
+ * Copyright (c) 2017 Conor O'Gorman <i...@conorogorman.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define SC1750_GPIO_LED_POWER 11
+#define SC1750_GPIO_LED_ERR1 12
+#define SC1750_GPIO_LED_WLAN 13
+#define SC1750_GPIO_LED_ERR2 14
+#define SC1750_GPIO_LED_OK3 15
+#define SC1750_GPIO_LED_ERR3 16
+#define SC1750_GPIO_BTN_RESET 4
+
+#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */
+#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL)
+
+#define SC1750_MAC0_OFFSET 0
+#define SC1750_MAC1_OFFSET 6
+#define SC1750_WMAC_CALDATA_OFFSET 0x1000
+#define SC1750_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led sc1750_leds_gpio[] __initdata = {
+ {
+ .name = "sc1750:green:power",
+ .gpio = SC1750_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "sc1750:red:power",
+ .gpio = SC1750_GPIO_LED_ERR1,
+ .active_low = 1,
+ },
+ {
+ .name = "sc1750:green:wlan",
+ .gpio = SC1750_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "sc1750:red:wlan",
+ .gpio = SC1750_GPIO_LED_ERR2,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button sc1750_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = SC1750_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static struct at803x_platform_data at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 0,
+ .enable_rgmii_tx_delay = 0,
+};
+
+static struct mdio_board_info sc1750_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 1,
+ .platform_data = &at803x_data,
+ },
+};
+
+static void __init sc1750_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio),
+ sc1750_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(sc1750_gpio_keys),
+ sc1750_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_nfc();
+
+ ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_mdio(0, 0);
+ mdiobus_register_board_info(sc1750_mdio0_info,
+ ARRAY_SIZE(sc1750_mdio0_info));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0);
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000101;
+ ath79_eth0_pll_data.pll_100 = 0xa4000101;
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = 0xF;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index da9c160..d849272 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -168,6 +168,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT
Lite 5nD */
ATH79_MACH_RE450, /* TP-LINK RE450 */
ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_SC1750, /* Abicom SC1750 */
ATH79_MACH_SC300M, /* Abicom SC300M */
ATH79_MACH_SC450, /* Abicom SC450 */
ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
diff --git a/target/linux/ar71xx/image/generic.mk
b/target/linux/ar71xx/image/generic.mk
index 02b90b0..0214c53 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -464,6 +464,16 @@ define Device/onion-omega
endef
TARGET_DEVICES += onion-omega
+define Device/sc1750
+ DEVICE_TITLE := Abicom SC1750
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
kmod-usb-ledtrig-usbport
+ BOARDNAME = SC1750
+ IMAGE_SIZE = 15744k
+ CONSOLE = ttyS0,115200
+ MTDPARTS =
spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+endef
+TARGET_DEVICES += sc1750
+
define Device/sc300m
DEVICE_TITLE := Abicom SC300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
kmod-usb-ledtrig-usbport
--
2.9.3
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
