Hi, > Dear All, > I currently add supprt for the dwr-512 device on LEDE. > This device have a 3G modem embedded. > The current available configuration uses the usb-option to establish the 3G > connection over ppp. > Nevertheless the modem offer one cdc-ether interface with better > performance. > > It seems to me that currently this kind of "protocol" is not supported in > LEDE. > In particular I'm unable to found an interface type in the > /etc/config/network to setup this kind of connection. > > Currently I'm able to establish a connection setting the interface in > "manual" mode. > > To do this I setup an usb interface > > config interface 'wan3g' > option ifname 'usb0' > option proto 'dhcp' > > then I need to send manually the following command to the /dev/ttyUSB0 to > establish the 3G connection:
Please use the existing ncm protocol for this. It shouldn't matter that the actual module used is cdc_ether instead of cdc_ncm. You just need to add the correct commands to the ncm.json file under a new object with the manufacturer name that is taken from the output of the ATI-command. I can help you with the details if needed. I would assume that the AT-commands with the question mark at the end are not actually needed to bring this online? Best regards, Matti _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
