Signed-off-by: Yong-hyu Ban <perillam...@gentoo.moe>
---
Changelog
v1: Initial attempt to add support for WeVO W2974NS v2
v2: Fix incorrect DTS
v3: Fix incorrect DTS, Remove SDHCI, Add 256M variant support (11AC NAS Router)
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/lib/ramips.sh | 6 ++
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/11ACNAS.dts | 12 +++
target/linux/ramips/dts/W2914NSV2.dts | 12 +++
target/linux/ramips/dts/W2914NSV2.dtsi | 117 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 16 +++
8 files changed, 168 insertions(+)
create mode 100644 target/linux/ramips/dts/11ACNAS.dts
create mode 100644 target/linux/ramips/dts/W2914NSV2.dts
create mode 100644 target/linux/ramips/dts/W2914NSV2.dtsi
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0f1ad57..e443cc7 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -299,6 +299,9 @@ vocore)
ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
set_wifi_led "$board:green:status"
;;
+w2914nsv2)
+ set_usb_led "$board:green:usb"
+ ;;
w502u)
set_usb_led "$board:blue:usb"
set_wifi_led "rt2800pci-phy0::radio"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index e2a2f94..52289a4 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -86,6 +86,7 @@ ramips_setup_interfaces()
sap-g3200u3|\
sk-wb8|\
vr500|\
+ w2914nsv2|\
wf-2881|\
witi|\
wl-wn575a3|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 2560eb7..07d5f8d 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -13,6 +13,9 @@ ramips_board_detect() {
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}'
/proc/cpuinfo)
case "$machine" in
+ *"11AC NAS Router")
+ name="w2914nsv2"
+ ;;
*"3G150B")
name="3g150b"
;;
@@ -451,6 +454,9 @@ ramips_board_detect() {
*"W150M")
name="w150m"
;;
+ *"W2914NS v2")
+ name="w2914nsv2"
+ ;;
*"W306R V2.0")
name="w306r-v20"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7f161f5..169e0ff 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -131,6 +131,7 @@ platform_check_image() {
vocore|\
vr500|\
w150m|\
+ w2914nsv2|\
w306r-v20|\
w502u|\
wf-2881|\
diff --git a/target/linux/ramips/dts/11ACNAS.dts
b/target/linux/ramips/dts/11ACNAS.dts
new file mode 100644
index 0000000..55678f5
--- /dev/null
+++ b/target/linux/ramips/dts/11ACNAS.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+#include "W2914NSV2.dtsi"
+
+/ {
+ model = "WeVO 11AC NAS Router";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+};
diff --git a/target/linux/ramips/dts/W2914NSV2.dts
b/target/linux/ramips/dts/W2914NSV2.dts
new file mode 100644
index 0000000..37afffd
--- /dev/null
+++ b/target/linux/ramips/dts/W2914NSV2.dts
@@ -0,0 +1,12 @@
+/dts-v1/;
+
+#include "W2914NSV2.dtsi"
+
+/ {
+ model = "WeVO W2914NS v2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+};
diff --git a/target/linux/ramips/dts/W2914NSV2.dtsi
b/target/linux/ramips/dts/W2914NSV2.dtsi
new file mode 100644
index 0000000..c842b00
--- /dev/null
+++ b/target/linux/ramips/dts/W2914NSV2.dtsi
@@ -0,0 +1,117 @@
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ // Only USB LED is connected to GPIO.
+ // All of other LEDs are connected directly to
+ // switch, WiFi chip, Vcc, so they are not controllable
+ // via GPIO
+
+ usb {
+ label = "w2914nsv2:green:usb";
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&xhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ wifi@14c3,7662 {
+ compatible = "pci14c3,7662";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ wifi@14c3,7603 {
+ compatible = "pci14c3,7603";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 116d092..7f32733 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -199,6 +199,22 @@ define Device/rb750gr3
endef
TARGET_DEVICES += rb750gr3
+define Device/w2914nsv2
+ DTS := W2914NSV2
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := WeVO W2914NS v2
+ DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621
kmod-mt76
+endef
+TARGET_DEVICES += w2914nsv2
+
+define Device/11acnas
+ DTS := 11ACNAS
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := WeVO 11AC NAS Router
+ DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-i2c-mt7621
kmod-mt76
+endef
+TARGET_DEVICES += 11acnas
+
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile
--
2.10.2
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
