On 1 November 2016 at 11:17, Jacek Trzcinski <ja...@mgt.pl> wrote: > The patch adds support for TPLINK MR3420v3 with the extra kernel module > for non gpio controlled LEDs. > > The USB modem functionality has not been tested yet but seems to be ok > since core of the code was taken from TL-MR3420v2 and TL-WR841Nv9. > Anyway it will be confirmed soon.
I think Jo panicked a bit, 750 lines patch sounds perfectly fine for sending as an uncompressed e-mail. It seems your LED driver duplicated hc595 support that is already implemented in the gpio-74x164.c. I successfully used that driver for some Buffalo's Broadcom based device (arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts). I'd suggest doing some research on that hc595 driver. Meanwhile you may send support for MR3420v3 without the LED driver if you wan, it may save you some rebasing work. I believe we'll be fine with MR3420v3 support without LEDs for now. _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
