On 2016-10-18 09:49, André Valentin wrote:
> Hi John,
>
> thanks for your comments. Please take a look:
>
> Am 18.10.2016 um 08:22 schrieb John Crispin:
>
>>> +++ b/target/linux/ipq806x/base-files/lib/preinit/04_set_mtd_ipq806x.sh
>>> @@ -0,0 +1,21 @@
>>> +#
>>> +# Copyright (C) 2009 OpenWrt.org
>>> +#
>>> +
>>> +. /lib/ipq806x.sh
>>> +. /lib/functions/system.sh
>>> +
>>> +preinit_assign_mtd2block() {
>>> + case $(ipq806x_board_name) in
>>> + nbg6817)
>>> + echo "/dev/mmcblk0p2,64KiB,romd" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + echo "/dev/mmcblk0p3,64KiB,header" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + echo "/dev/mmcblk0p4,64KiB,kernel" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + echo "/dev/mmcblk0p6,64KiB,header_1" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + echo "/dev/mmcblk0p7,64KiB,kernel_1" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + echo "/dev/mmcblk0p8,64KiB,rootfs_1" >
>>> /sys/module/block2mtd/parameters/block2mtd
>>> + ;;
>>> + esac
>>> +}
>>> +
>>
>> can this not go into the commandline inside the devicetree ?
> I tried, but block2mtd accepts only one mapping in the command line.
>
> I will rework the patch the next days and send an update.
Why do we need block2mtd at all for this target?
- Felix
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
