Hi Donald,
Thanks for responding
The MTU seems fine.
This is the WAN link
pppoa-wan Link encap:Point-to-Point Protocol
inet addr:2.25.173.155 P-t-P:172.16.11.136 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:94409 errors:0 dropped:0 overruns:0 frame:0
TX packets:85742 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:75750172 (72.2 MiB) TX bytes:14369708 (13.7 MiB)
I sent a 1492 byte icmp request externally which got through.
root@ubuntu:~# ping -s 1464 2.25.173.155
PING 2.25.173.155 (2.25.173.155) 1464(1492) bytes of data.
1472 bytes from 2.25.173.155: icmp_seq=1 ttl=57 time=49.4 ms
^C
--- 2.25.173.155 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 49.439/49.439/49.439/0.000 ms
So MTU looks fine.
Thanks
Daniel
From: Donald Chisholm [mailto:[email protected]]
Sent: 04 August 2016 19:41
To: Daniel Niasoff <[email protected]>
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq
Hi Daniel,
I just saw your message on the LEDE mailing list. The freezing and catching up
sounds like a MTU problem. Could there be a MTU mismatch on the ADSL interface
(1500 <->1492)?
Donald
On Thu, Aug 4, 2016 at 6:47 AM, Daniel Niasoff <mailto:[email protected]>
wrote:
Hi,
I am quite desperate because I have a project going with these routers and I am
running really late.
Can anyone spare some time to help me, I am willing to pay an hourly rate for
the time if it will help.
This issue only occurs on ADSL. On VDSL performance is really good even using
PPPoE.
The issue is a sluggish access to the CPU interface via ADSL, so for example if
you are typing in a SSH client, it will keep freezing for a second or two, than
catch up.
Routed traffic is fine.
Thanks
Daniel
-----Original Message-----
From: Martin Blumenstingl [mailto:mailto:[email protected]]
Sent: 03 August 2016 08:03
To: Alexander Couzens <mailto:[email protected]>
Cc: Daniel Niasoff <mailto:[email protected]>;
mailto:[email protected]; mailto:[email protected];
mailto:[email protected]; mailto:[email protected]
Subject: Re: [OpenWrt-Devel] latency on PPPoA ADSL Annex A on using Lantiq
On Tue, Aug 2, 2016 at 6:10 PM, Alexander Couzens <mailto:[email protected]> wrote:
> On Tue, 2 Aug 2016 13:38:55 +0000
> Daniel Niasoff <mailto:[email protected]> wrote:
>
>> I can provide remote ssh access if required. When using SSH you will
>> notice it feels sluggish due to this issue.
>>
>> Any ideas pleeeease, I am really stuck here?
>
> I can confirm your problem with PPPoE on ADSL. Also noticed high
> latency on ssh connection through the router.
> I guess it's not in the DSL part, because when using the TD8970 as
> modem with pass through everything is fine.
someone else did performance/throughput testing on the HH5A, the results are
posted here: [0]
I did not have time to look into this yet, but maybe Hauke or John have an idea
what's going on.
[0] http://openwrt.ebilan.co.uk/viewtopic.php?f=7&p=1189
_______________________________________________
openwrt-devel mailing list
mailto:[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
Lede-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/lede-dev
