On 24/06/2016 05:25, Drew from NixCore wrote:
> John,
>
> I am not sure what is causing the line wrap, the emails that I get from
> the list don't have the line wrap but the list shows it.
>
> Any suggestions?
>
> Drew
Hi Drew
its your email client with 99.99% certainty. try using "git send-email"
or use github to send us a PR.
John
>
> On 06/16/2016 05:45 AM, John Crispin wrote:
>> Hi,
>>
>> patch does not apply. please go here
>>
>> --> http://patchwork.ozlabs.org/patch/636150/
>>
>> click on "download mbox" and you will see that it is line wrapped at 80
>> characters.
>>
>> John
>>
>>
>> On 16/06/2016 02:37, Drew from NixCore wrote:
>>> Added NixCore X1 ramips target http://nixcores.com. This builds 8M and
>>> 16M images. V5 updates the patch to work with the latest source.git
>>>
>>> Signed-off-by: Drew Gaylo <drew at nixcores.com>
>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>>> b/target/linux/ramips/base-files/etc/board.d/02_network
>>> index be1912a..ebcf619 100755
>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>>> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
>>> mt7628|\
>>> mzk-750dhp|\
>>> mzk-w300nh2|\
>>> + nixcore|\
>>> oy-0001|\
>>> pbr-m1|\
>>> psg1208|\
>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>>> b/target/linux/ramips/base-files/lib/ramips.sh
>>> index bd4f33d..340a628 100755
>>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>>> @@ -322,6 +322,9 @@ ramips_board_detect() {
>>> *"NCS601W")
>>> name="ncs601w"
>>> ;;
>>> + *"NixcoreX1")
>>> + name="nixcore-x1"
>>> + ;;
>>> *"NW718")
>>> name="nw718"
>>> ;;
>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> index 0b3d8c7..8749c99 100755
>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> @@ -95,6 +95,7 @@ platform_check_image() {
>>> mzk-w300nh2|\
>>> mzk-wdpr|\
>>> nbg-419n|\
>>> + nixcore|\
>>> nw718|\
>>> oy-0001|\
>>> pbr-m1|\
>>> diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts
>>> b/target/linux/ramips/dts/NIXCOREX1-16M.dts
>>> new file mode 100644
>>> index 0000000..2ffcbb2
>>> --- /dev/null
>>> +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts
>>> @@ -0,0 +1,95 @@
>>> +/dts-v1/;
>>> +
>>> +/include/ "rt5350.dtsi"
>>> +
>>> +/ {
>>> + compatible = "NixcoreX1", "ralink,rt5350-soc";
>>> + model = "NixcoreX1";
>>> +
>>> + chosen{
>>> + bootargs = "console=ttyS1,57600";
>>> + };
>>> +};
>>> +
>>> +&gpio0{
>>> + status = "okay";
>>> +};
>>> +
>>> +&gpio1{
>>> + status = "okay";
>>> +};
>>> +
>>> +&i2c{
>>> + status = "okay";
>>> +};
>>> +&uart{
>>> + status = "okay";
>>> + /* Mix of uart and gpio */
>>> + reset-names = "gpio uartf";
>>> +};
>>> +&spi0{
>>> + status = "okay";
>>> +
>>> + m25p80@0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "s25fl064k";
>>> + reg = <0>;
>>> + linux,modalias = "m25p80", "s25fl064k";
>>> + spi-max-frequency = <10000000>;
>>> +
>>> + partition@0 {
>>> + label = "uboot";
>>> + reg = <0x0 0x30000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition@30000 {
>>> + label = "uboot-env";
>>> + reg = <0x30000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + factory: partition@40000 {
>>> + label = "factory";
>>> + reg = <0x40000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition@50000 {
>>> + label = "firmware";
>>> + reg = <0x50000 0xfb0000>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&pinctrl {
>>> + state_default: pinctrl0 {
>>> + gpio {
>>> + /* Associate the tjag, uartf and led groups with gpio */
>>> + ralink,group = "jtag", "led", "spi_cs1";
>>> + /* How do we set individual pins? */
>>> + ralink,function = "gpio";
>>> + };
>>> + };
>>> +};
>>> +
>>> +ðernet {
>>> + mtd-mac-address = <&factory 0x4>;
>>> +};
>>> +
>>> +&esw {
>>> + ralink,portmap = <0x17>;
>>> +};
>>> +
>>> +&wmac {
>>> + ralink,mtd-eeprom = <&factory 0>;
>>> +};
>>> +
>>> +&ehci {
>>> + status = "okay";
>>> +};
>>> +
>>> +&ohci {
>>> + status = "okay";
>>> +};
>>> diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts
>>> b/target/linux/ramips/dts/NIXCOREX1-8M.dts
>>> new file mode 100644
>>> index 0000000..ca557fd
>>> --- /dev/null
>>> +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts
>>> @@ -0,0 +1,95 @@
>>> +/dts-v1/;
>>> +
>>> +/include/ "rt5350.dtsi"
>>> +
>>> +/ {
>>> + compatible = "NixcoreX1", "ralink,rt5350-soc";
>>> + model = "NixcoreX1";
>>> +
>>> + chosen{
>>> + bootargs = "console=ttyS1,57600";
>>> + };
>>> +};
>>> +
>>> +&gpio0{
>>> + status = "okay";
>>> +};
>>> +
>>> +&gpio1{
>>> + status = "okay";
>>> +};
>>> +
>>> +&i2c{
>>> + status = "okay";
>>> +};
>>> +&uart{
>>> + status = "okay";
>>> + /* Mix of uart and gpio */
>>> + reset-names = "gpio uartf";
>>> +};
>>> +&spi0{
>>> + status = "okay";
>>> +
>>> + m25p80@0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "s25fl064k";
>>> + reg = <0>;
>>> + linux,modalias = "m25p80", "s25fl064k";
>>> + spi-max-frequency = <10000000>;
>>> +
>>> + partition@0 {
>>> + label = "uboot";
>>> + reg = <0x0 0x30000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition@30000 {
>>> + label = "uboot-env";
>>> + reg = <0x30000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + factory: partition@40000 {
>>> + label = "factory";
>>> + reg = <0x40000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition@50000 {
>>> + label = "firmware";
>>> + reg = <0x50000 0x7b0000>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&pinctrl {
>>> + state_default: pinctrl0 {
>>> + gpio {
>>> + /* Associate the tjag, uartf and led groups with gpio */
>>> + ralink,group = "jtag", "led", "spi_cs1";
>>> + /* How do we set individual pins? */
>>> + ralink,function = "gpio";
>>> + };
>>> + };
>>> +};
>>> +
>>> +ðernet {
>>> + mtd-mac-address = <&factory 0x4>;
>>> +};
>>> +
>>> +&esw {
>>> + ralink,portmap = <0x17>;
>>> +};
>>> +
>>> +&wmac {
>>> + ralink,mtd-eeprom = <&factory 0>;
>>> +};
>>> +
>>> +&ehci {
>>> + status = "okay";
>>> +};
>>> +
>>> +&ohci {
>>> + status = "okay";
>>> +};
>>> diff --git a/target/linux/ramips/image/rt305x.mk
>>> b/target/linux/ramips/image/rt305x.mk
>>> index da7fc46..db12a8e 100644
>>> --- a/target/linux/ramips/image/rt305x.mk
>>> +++ b/target/linux/ramips/image/rt305x.mk
>>> @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs
>>> mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
>>> imgname,$(1),$(2))-factory.bin;
>>> endef
>>>
>>> +# This is called to build the nixcore image. Build both 8MB and 16MB
>>> +nixcore_8mb_mtd_size=8060928
>>> +nixcore_16mb_mtd_size=16449536
>>> +define BuildFirmware/NIXCOREX1/squashfs
>>> +# Args are XXX, nixcore-mM and NIXCOREX1-xM
>>> + $(call
>>> BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size))
>>>
>>>
>>> + $(call
>>> BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size))
>>>
>>>
>>> + # Can do somethings here after the build?
>>> +endef
>>> +define BuildFirmware/NIXCOREX1/initramfs
>>> +# Args are XXXX, nixcore-mM and NIXCOREX1-xM
>>> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
>>> + $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
>>> +endef
>>> +
>>> vocore_8mb_mtd_size=8060928
>>> vocore_16mb_mtd_size=16449536
>>> define BuildFirmware/VOCORE/squashfs
>>> @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call
>>> BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
>>> Image/Build/Profile/MZKW300NH2=$(call
>>> BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
>>>
>>>
>>> Image/Build/Profile/MZKWDPR=$(call
>>> BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
>>> Image/Build/Profile/NCS601W=$(call
>>> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
>>> +Image/Build/Profile/NIXCOREX1=$(call
>>> BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1)
>>> nw718_mtd_size=3801088
>>> Image/Build/Profile/NW718=$(call
>>> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
>>>
>>>
>>> Image/Build/Profile/M2M=$(call
>>> BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
>>> @@ -353,6 +369,7 @@ define Image/Build/Profile/Default
>>> $(call Image/Build/Profile/MZKWDPR,$(1))
>>> $(call Image/Build/Profile/NBG-419N,$(1))
>>> $(call Image/Build/Profile/NCS601W,$(1))
>>> + $(call Image/Build/Profile/NIXCOREX1,$(1))
>>> $(call Image/Build/Profile/NW718,$(1))
>>> $(call Image/Build/Profile/MINIEMBWIFI,$(1))
>>> $(call Image/Build/Profile/MINIEMBPLUG,$(1))
>>> diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk
>>> b/target/linux/ramips/rt305x/profiles/nixcore.mk
>>> new file mode 100644
>>> index 0000000..22dee9b
>>> --- /dev/null
>>> +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk
>>> @@ -0,0 +1,20 @@
>>> +#
>>> +# Copyright (C) 2014 OpenWrt.org
>>> +#
>>> +# This is free software, licensed under the GNU General Public
>>> License v2.
>>> +# See /LICENSE for more information.
>>> +#
>>> +
>>> +define Profile/NIXCOREX1
>>> + NAME:=NixcoreX1
>>> + PACKAGES:=\
>>> + kmod-usb-core kmod-usb-ohci kmod-usb2 \
>>> + kmod-i2c-core kmod-i2c-ralink \
>>> + kmod-spi-dev
>>> +endef
>>> +
>>> +define Profile/NIXCOREX1/Description
>>> + Package set for Nixcore X1 board
>>> +endef
>>> +
>>> +$(eval $(call Profile,NIXCOREX1))
>>>
>>>
>>> _______________________________________________
>>> Lede-dev mailing list
>>> Lede-dev@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/lede-dev
>> _______________________________________________
>> Lede-dev mailing list
>> Lede-dev@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/lede-dev
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
