Hi there! I've just revived an old WRT54GL and implanted 32MB RAM into it - it works perfectly well :)
However, for me, the latest working image seems to be 15.05.1. I installed openwrt-15.05.1-brcm47xx-legacy-squashfs.trx which has kernel 3.18.23 and can see this on the serial console during startup: > (...) > Device eth0: hwaddr 68-7F-74-xx-xx-xx, ipaddr 192.168.1.1, mask 255.255.255.0 > gateway not set, nameserver not set > Reading :: Failed.: Timeout occured > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3712 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > [ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 > (OpenWrt/Linaro GCC 4.8-2014.04 r48532) ) #1 Tue Mar 1 09:18:44 CET 2016 > [ 0.000000] CPU0 revision is: 00029008 (Broadcom BMIPS3300) > [ 0.000000] bcm47xx: Using ssb bus > [ 0.000000] ssb: Found chip with id 0x5352, rev 0x00 and package 0x02 > (...) However, if I take openwrt-brcm47xx-legacy-linksys-wrt54g-squashfs.bin, or lede-brcm47xx-legacy-linksys-wrt54g-squashfs.bin, or the trx versions of these for the sysupgrade, or the generic (and not legacy), just in case... none of them work. Serial console freezes at: > (...) > Device eth0: hwaddr 68-7F-74-xx-xx-xx, ipaddr 192.168.1.1, mask 255.255.255.0 > gateway not set, nameserver not set > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3800 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 Maybe this is related to kernel switch 3.18.23 -> 4.1.x? As the target images are still built, I guess support hasn't been dropped yet. WRT54GL with 32MB: Er läuft und läuft und läuft... :) Any thoughts on this? Best regards, P.Wassi _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
