Signed-off-by: Mathias Kresin <d...@kresin.me>
---
 target/linux/lantiq/dts/VGV7519.dtsi   | 54 +++++++++++++---------------------
 target/linux/lantiq/dts/VGV7519BRN.dts | 17 +----------
 target/linux/lantiq/dts/VGV7519NOR.dts | 18 ------------
 3 files changed, 21 insertions(+), 68 deletions(-)

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi 
b/target/linux/lantiq/dts/VGV7519.dtsi
index 95de6e5..9313fda 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -23,30 +23,32 @@
        };
        
        fpi@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "lantiq,fpi", "simple-bus";
-               ranges = <0x0 0x10000000 0xEEFFFFF>;
-               reg = <0x10000000 0xEF00000>;
-
                localbus@0 {
-                       #address-cells = <2>;
-                       #size-cells = <1>;
-                       compatible = "lantiq,localbus", "simple-bus";
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       boardconfig: partition@40000 {
+                                               label = "board_config";
+                                               reg = <0x40000 0x10000>;
+                                               read-only;
+                                       };
+                               };
+                       };
                };
 
                gpio: pinmux@E100B10 {
-                       compatible = "lantiq,pinctrl-xr9";
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;
 
-                       interrupt-parent = <&icu0>;
-                       interrupts = <166 135 66 40 41 42 38>;
-
-                       #gpio-cells = <2>;
-                       gpio-controller;
-                       reg = <0xE100B10 0xA0>;
-
                        state_default: pinmux {
                                stp {
                                        lantiq,groups = "stp";
@@ -109,19 +111,7 @@
 
                pci@E105400 {
                        status = "okay";
-                       #address-cells = <3>;
-                       #size-cells = <2>;
-                       #interrupt-cells = <1>;
-                       compatible = "lantiq,pci-xway";
-                       bus-range = <0x0 0x0>;
-                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   
/* pci memory */
-                               0x1000000 0 0x00000000 0xAE00000 0 0x200000>; 
/* io space */
-                       reg = <0x7000000 0x8000         /* config space */
-                               0xE105400 0x400>;       /* pci bridge */
                        lantiq,bus-clock = <33333333>;
-                       /*lantiq,external-clock;*/
-                       lantiq,delay-hi = <0>; /* 0ns delay */
-                       lantiq,delay-lo = <0>; /* 0.0ns delay */
                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                        interrupt-map = <
                                0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
@@ -278,6 +268,7 @@
                reg = <1>;
                mac-address = [ 00 11 22 33 44 56 ];
                lantiq,wan;
+
                ethernet@5 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;
@@ -293,27 +284,22 @@
                phy0: ethernet-phy@0 {
                        reg = <0x0>;
                        compatible = "lantiq,phy11g", 
"ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy1: ethernet-phy@1 {
                        reg = <0x1>;
                        compatible = "lantiq,phy11g", 
"ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy5: ethernet-phy@5 {
                        reg = <0x5>;
                        compatible = "lantiq,phy11g", 
"ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy11g", 
"ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
                phy13: ethernet-phy@13 {
                        reg = <0x13>;
                        compatible = "lantiq,phy11g", 
"ethernet-phy-ieee802.3-c22";
-                       lantiq,c45-reg-init = <1 0 0 0>;
                };
        };
 };
diff --git a/target/linux/lantiq/dts/VGV7519BRN.dts 
b/target/linux/lantiq/dts/VGV7519BRN.dts
index 4f56ba8..cc365ec 100644
--- a/target/linux/lantiq/dts/VGV7519BRN.dts
+++ b/target/linux/lantiq/dts/VGV7519BRN.dts
@@ -6,23 +6,8 @@
 / {
        fpi@10000000 {
                localbus@0 {
-                       nor-flash@0 {
-                               compatible = "lantiq,nor", "cfi-flash";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
+                       nor-boot@0 {
                                partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       partition@40000 {
-                                               label = "board_config";
-                                               reg = <0x40000 0x10000>;
-                                               read-only;
-                                       };
                                        partition@80000 {
                                                label = "firmware";
                                                reg = <0x80000 0x780000>;
diff --git a/target/linux/lantiq/dts/VGV7519NOR.dts 
b/target/linux/lantiq/dts/VGV7519NOR.dts
index 24a3d16..69b0a1f 100644
--- a/target/linux/lantiq/dts/VGV7519NOR.dts
+++ b/target/linux/lantiq/dts/VGV7519NOR.dts
@@ -7,26 +7,11 @@
        fpi@10000000 {
                localbus@0 {
                        nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
                                partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
                                        partition@0 {
                                                label = "uboot";
                                                reg = <0x00000 0x40000>;
                                        };
-                                       partition@40000 {
-                                               label = "board_config";
-                                               reg = <0x40000 0x10000>;
-                                               read-only;
-                                       };
                                        partition@60000 {
                                                label = "uboot_env";
                                                reg = <0x60000 0x10000>;
@@ -34,9 +19,6 @@
                                        partition@80000 {
                                                label = "firmware";
                                                reg = <0x80000 0xf80000>;
-                                               // 0x080000 - 0x01b0000 : kernel
-                                               // 0x1b0000 - 0x1000000 : 
rootfs (squashfs)
-                                               // 0x390000 - 0x1000000 : 
rootfs_data
                                        };
                                };
                        };
-- 
1.9.1


_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev

Reply via email to