On Sat, 27 May 2017 11:20:17 +0200, Joe via Lazarus <lazarus@lists.lazarus-ide.org> wrote:
>Am 26.05.2017 um 13:02 schrieb Bo Berglund via Lazarus: >> You could try my script for installation of FPC + Lazarus on an RPi3. >> http://blog.boberglund.com/install_lazfpc_local_pi.sh >> >> In order to get the version you need just edit the script before >> running it and replace the versions at the top of the file with the >> one you want. >Bo, >unfortunately, this failed with error message something could not be >found. Seems, I did not edit the script the right way. >What lines are to be edited and exactly how for Lazarus 1.8.0 RC1? >Thanx -- Joe Hi again! I have now returned home and been able to check the script. I used a brand new Jessie PIXEL image and did this before starting the script: - Created dir /home/pi/bin where the fpc binary will reside - Logged off and back on again to put this dir into the PATH Turns out that the fpc sourceinstall command on line #150 fails because there is no current path to the seed compiler ppcarm.... So I have added option FPC=<path to ppcarm> on that line and with that done the script runs OK to the end and Lazarus is available on the main Jessie menu below "Programming". The corrected script is found here: http://blog.boberglund.com/install_lazfpc_local_pi.sh Regarding configuration, these lines need to be handled by editing the versions mainly (lines #32 and #43-46): LAZDESK=/home/pi/.local/share/applications/lazarus_1.6.2.desktop FPCTAG=release_3_0_0 FPCVER=3.0.0 LAZTAG=lazarus_1_6_2 LAZVER=1.6.2 In your case change them to this: LAZDESK=/home/pi/.local/share/applications/lazarus_1.8.RC1.desktop FPCTAG=release_3_0_2 FPCVER=3.0.2 LAZTAG=lazarus_1_8_0_RC1 LAZVER=1.8.RC1 HTH -- Bo Berglund Developer in Sweden -- _______________________________________________ Lazarus mailing list Lazarus@lists.lazarus-ide.org http://lists.lazarus-ide.org/listinfo/lazarus
