This may be question which doesn't belong in this list. But with all the experts in measurement and automation visiting this list, I thought I will try. Sorry if this is considered an intrusion. What I have is a request to replace an existing LabVIEW/DSC based test system running on late 80's hardware (Acromag 4100 series). The system is used to set up and run various tests at various locations within a high voltage testing laboratory. One of the tests we run is voltage/temperature endurance test where the UUT is heated to 100+ F and subject to 30KV for 400-600 hours. The requirements of the new system is high channel-to-channel isolation (1500V or more), read input AC rms as well as DC (5-150V), thermocouples etc. Must be able to view and control the tests remotely using networked and/or dial-in. Send alarms (by phone/email). Some tests run continuously for days. I know I can meet the communication requirements (alarm, control etc.) using LabVIEW/DSC. But what the client is looking for is off-the-shelf products which require minimum to no programming.
I know this is very sketchy. All I am looking for at this time is a starting point for my investigation. Any help is truly appreciated. Thanks in advance. V. P. Nair American Electric Power [EMAIL PROTECTED]
