First off, I have a PXI-6025E DAQ card and a PXI-5102 High speed digitizer. What i need to do is to send out a pulse train from the DAQ for about 1 second, and at the same time, read a Analong In on the same DAQ card as well as the two Digitizer lines at the start of the first pulse in the pulse train, and then ending when the pulse train does (I can do the stop just based on the freq Im useing and use number of samples to time, os this isnt the problem). The problme for me is starting this event.
My setup is basicly 3 lines in , one AI DAQ and two for the digitizer. The TTL signal is going to a switch diode that one of the Inputs from the digitizer is coming from. Im useing the pulse train to switch the source for my switch diode, and pulseing it at a high rate to compare the signals coming in through the switch diode. And as well I will be having to look at the other two Inputs at the same time. How would I go about doing somthing like this? PXI-6025E PXI-5102 Labview 7.1 Windows XP Thank you very much, Mark Wiesbock
