Greg,
If you go to the Format and Precision sub-menu and select Advanced Editing
Mode for Relative Time, you can edit the format string to be "%.0t" which
will convert 100 (sec.) to 01:40 and automatically add hours as necessary.
Dan
Daniel A. Gilmore
Spectral Instruments, Inc.
420 North Bonita Avenue
Tucson, AZ 85745
Email: [EMAIL PROTECTED]
Phone: (520)884-8821 Ext. 118
FAX: (520) 884-8803
web: www.specinst.com
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of F. Gregory Metz
Sent: Wednesday, January 14, 2004 10:59 AM
To: [EMAIL PROTECTED] army. mil (E-mail)
Subject: numeric and relative time
Hello, all.
I have come across behavior that seems to have changed from LV 6.1
to LV 7, and was wondering if anyone had an easy workaround for this.
In LV 6.1, place a numeric control on the front panel. In the Format
and Precision sub-menu, change to relative time. The control will now
read 00:00:00. Type 100 into the control, and the control
automatically converts that number to 1:40, or 100 seconds. This is the
(my) desired behavior. However, In LV 7, the control converts to
00:00:00 whenever a number is input that does not conform to the
HH:MM:SS format. Any suggestions?
greg
----------------------------------------------
F. Gregory Metz
Aegis Solutions, Inc.
2660 Yonkers Rd Suite T
Raleigh, NC 27604
(919) 861-0103 x224
(919) 861-0104 fax
www.aegis-solutions.com
