PROGRAM 605 / 606

outgoing day/night
enable CO08 for  all jacks (or- set same as co 07 just in case there is 
some odd programming.

do same for program 603 / 604  to set ringing like co 07

you can buy manuals on cd on ebay, etc

-larry / dallas




Jason Zimberoff wrote:

>Howdy all.
>
>This is my first post to this list.  Please let me know if I break any
>protocol rules...
>
>Background:
>
>I am the only one who tries to maintain the phone system here at work.
>We have a KX-TD1232 digital system with the TVS200 voice mail system
>integrated.
>
>I do have all the manuals for the voice mail side, and have set up a
>terminal to actually communicate with the TVS200 part of the system.
>
>But the only way I have to access the main system programming is through
>the phone on extension 101.  I have no installation manual for the main
>system.
>
>We used to have 8 incoming (CO) lines.  At one point, we pulled one out
>of the hunt group to use as a fax machine.  An outside telephone
>installation
>company came in to do that for us at the time.  I'm pretty sure they had a
>special program that would talk to the main 1232 box, which I do not have.
>They set up the system to only use the first 7 CO lines at that time.
>
>Problem:
>
>Now, we want to add that line back into the CO hunt group. (And I do not
>want
>to call the telephone installers to come in just to do this one thing.)
>
>I know that I need to get the telephone company to set the hunt group up on
>their end as well...
>
>I was able to wire line 8 back into the system.  If I call that number
>from an outside line, the CO8 light illuminates red, and the voice mail
>automated attendant picks up the call just like it should.  I can then dial
>in any extension or automated attendant choice and the call is handled
>correctly.
>
>But once I hang up, and the CO8 line light turns off, I still can not pick
>up CO8 from an inside extension to make a new call.  The message says "CO
>Not Assigned" and I get a fast busy signal.
>
>Is there a way I can tell the system to turn CO8 back on so that I can pick
>up CO8 from an inside extension?  (And also have it get picked if someone
>dials 9 from inside, and the first 7 are busy?)
>
>Thanks!
>
>Jason Zimberoff
>Prime Systems, Inc.
>(630) 681-2100 x 141
>[EMAIL PROTECTED]
>
>
>
>_________________________________________________________________
>KX-T Mailing list --- http://kxthelp.com/
>Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
>
>  
>



_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt

Reply via email to