Doug, If you haven't tried this yet... What happens on a different extension port on the system? If it still happens on another port, do you have more than 8 exts? If so, does it happen on a different 8 ext. card?
Next and maybe more significant question, is if you recall if the system was "initialized" before being installed the first time? Sometimes there may be glitches in the system memory, Panasonic recommends the memory be cleared before the units are first installed. I have seen a few really weird problems that get cleared up after clearing the memory. The only annoyance is that the system will have to be totally reprogrammed from scratch. Charles ----- Original Message ----- From: "Doug Brander" <[EMAIL PROTECTED]> To: <kxt@kxthelp.com> Sent: Thursday, May 12, 2005 10:59 AM Subject: KX-T: KXTA-624 Bizare problem with analog phone and propriatary phoneon same extension > Having a srtange problem that just started. I have only one extension > with > two phones: one propriatary and one SLT. Propriatary works fine, but when > you pick up the SLT the speaker is activated on the propriatary phone > causing feedback. I used to be able to dial 9 on the slt to get an > outside > line. Not now. Program slot 610 (sahrred phone extensions) all > extensions > are enabled. Tried different Propriatary phone and even a 2 conductor > cord > to SLT. Re punched wall jacks. Still f'd up. Any other ideas? > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
