Mike, We still have several of these systems in the field working fine.
Volume problems a usually from the phone company end. Did you check the voltage and amps loading on the CO lines ? If you are referring to a "CONFERENCE" feature, no there is no internal way to boot the volume. It would be better to have the customer subscribe to phone company 3-Way calling and use there feature. Wolfgang Network Telephone Company -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Childs Sent: Wednesday, April 06, 2005 13:28 To: [EMAIL PROTECTED] Cc: kxt@kxthelp.com Subject: Re: KX-T: KX-T30810 On Wed, 6 Apr 2005 11:54:17 -0500, you wrote: >I am having problems with low transmit volumes on an old analog 308 on >all phones and ports, the telephone lines have been tested. >Is there anyway to turn up the transmit volume on the entire system? >Thanks. > >Mike Jensen Mike, Replace it :) http://www.austintele.com/kxta308.htm Seriuosly tho, I've never heard of a global volume adjustment on these systems. It's certainly not in the manual if there is. There may be a couple of pots on the main board, you could try fiddling with them. Good luck, -Joe -- Joe Childs Austin Telecom (888) 999-3969 Voice (775) 888-9293 Fax _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
